This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
DISI Engine Spark and Fuel Injection Timings. Effects, Compromise and Robustness
Technical Paper
2001-01-3672
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
DISI engine emissions and fuel economy are strongly dependent upon fuel injection and spark timings, particularly when the engine is operating in stratified charge mode. Experimental studies of the effects of injection and spark timings and the interaction between these are described. The sensitivity of HC and NOx emissions to timings during stratified charge operation, the comparison of performance under stratified and homogeneous charge modes of operation and the rationale for mode switch point settings are investigated. The high sensitivity of emissions to injection and spark timing settings gives rise to potential robustness issues. These are described.
Recommended Content
Authors
Citation
Shayler, P., Jones, S., Horn, G., and Eade, D., "DISI Engine Spark and Fuel Injection Timings. Effects, Compromise and Robustness," SAE Technical Paper 2001-01-3672, 2001, https://doi.org/10.4271/2001-01-3672.Also In
References
- Shayler P J Jones S T Horn G “Characterisation of DISI emissions and fuel economy in homogeneous and stratified charge modes of operation” SAE Paper 2001-01-3671 2001
- Shayler P J Winborn L D Hill M J “The influence of Gas/Fuel Ratio on Combustion Stability and Misfire Limits of Spark Ignition Engines” SAE 2000-01-1208 2000
- Kaiser E W Siegl W O Brehob D D Haghgooie M “Engine-Out Emissions from a Direct Injection Spark ignition (DISI) Engine” SAE Paper 1999-01-1529 1999
- Kaiser E W Lawler A M Siegl W O Munoz R H Yang J Anderson R W “Exhaust Emissions from a Direct Injection Spark ignition (DISI) Engine Equipped with an Air-Forced Fuel Injector” SAE Paper 2000-01-0254 2000
- Heywood JB “Internal Combustion Engine Fundamentals” McGraw Hill 1988
- Kano M Saito K Basaki M “Analysis of Mixture Formation of Direct Injection Gasoline Engine” SAE Paper 980157 1998
- Matekunas F A “Modes and Measures of Cyclic Variability” SAE Paper 830337 1983
- Ando H Noma K Lida K Nakayama O Yamauchi T “Mitsubishi GDI Engine Strategies to meet the European Requirements” AVL, Conference “Engine and Environment” 1997
- Shelby M H Vanderwege B A Hochgreb S “Early Spray Development in Gasoline Direct-Injected Spark Ignition Engines” SAE Paper 980160 1998
- Stanglmaier R Li J Matthews D “The effect of In-Cylinder Wall Wetting Location on the HC Emissions from SI Engines” SAE Paper 1999-01-0502 1999
- Kume T Iwamoto Y Lida K Murakami M Akishino K Ando H “Combustion Control Technologies for Direct Injection SI Engine” SAE Paper 960600 1996
- Anderson R W Yang J Brehob D D Vallance J K Whiteaker R M “Understanding the Thermodynamics of Direct Injection Spark Ignition (DISI) Combustion Systems: An Analytical and Experimental Investigation” SAE Paper 962018 1996
- Iwamoto Y Noma K Nakayama O Yamauchi T Ando H “Development of Gasoline Direct Injection Engine” SAE Paper 970541 1997