This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Methodology for Springback Prediction
Technical Paper
2001-01-3409
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The springback of simple geometries can be predicted through theoretical analysis, however problems arise when transferring this analysis to the manufacturing environment. To determine why this is the case, a study of small curvature free bending through theoretical analysis, manufacturing data and Finite Element (FE) simulation was completed.
The theoretical analysis provided an understanding of the behavior of springback and gave accurate predictions in a controlled environment. The manufacturing and Finite Element data verified the trends predicted by theory, but lacked in accuracy.
The paper concludes by proposing a prediction method based solely on the geometry that is well defined in both environments.
Recommended Content
Authors
Topic
Citation
Gotzinger, M., Kalyanasundaram, S., Cardew-Hall, M., and Hodgson, P., "A Methodology for Springback Prediction," SAE Technical Paper 2001-01-3409, 2001, https://doi.org/10.4271/2001-01-3409.Also In
References
- Crane, E.V. Plastic Working of Metals and Power-Press Operations John Wiley & Sons, Inc 1932
- Davies, R.G. Springback in High-Strength Steels Journal of applied metalworking 1 4 1981 45 52
- Leu Daw-Kwei A simplified approach for evaluating bendability and springback in plastic bending of anisotropic sheet metals Journal of Materials Processing Technology 66 1997 9 17
- Dieter, G.E. Mechanical Metallurgy McGraw-Hill Book Company, Inc 1987
- Gardiner F.J. The Spring Back of Metals Transactions of ASME 79 1957 1 9
- Granzow, W.G. A Portable Springback Tester for In-Plant Determination of the Strength of Sheet Steels SAE Paper No. 830238 1983
- Hinman, C.W. Pressworking of Metals McGraw-Hill Book Company, Inc 1950
- Hill, R. The Mathematical Theory of Plasticity Oxford at the Clarendon Press 1950
- Huang, M. Gerdeen, J.C. Springback of Doubly Curved Developable Sheet Metal Surface – An Overview SAE Paper No. 940938 1995
- Kalpakjian, S. Manufacturing Processes for Engineering Materials Second Edition Addison-Wesley Publishing Company 1991
- Marciniak, Z. Duncan, J.L. The Mechanics of Sheet Metal Forming Edward Arnold 2000
- Montmayeur, N. Staub, C. Springback Prediction with Optris, Numisheet ’99 41 46
- Queener, C.A. DeAngelis, R.J. Elastic Springback and Residual Stresses in Sheet Metal Forming by Bending Transactions of ASME 61 1968 757 768
- Sanchez, L.R. Robertson, D. Gerdeen, J.C. Springback of Sheet Metal Bent to Small Radius/Thickness Ratios SAE Paper No. 960595 1996
- Shaffer, B.W. House R.N., Jr The Elastic-Plastic Stress Distribution Within a Wide Curved Bar Subjected to Pure Bending Journal of Applied Mechanics, Trans. ASME 1955 305 310
- Stanley, F.A. Punches and Dies Layout, Construction and Use McGraw-Hill Book Company, Inc 1950
- Timoshenko, s. Goodier, J.N. Theory of Elasticity McGraw-Hill Third Ed 1970 71 79
- Wang, Kinzel Altan, J. Materials Processing Technology 39 1993 279
- Yu, T.X. Johnson, W. Influence of Axial Force on the Elastic-Plastic Bending and Springback of a Beam Journal of Mechanical Working Technology 6 1982 5 21