This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Active Regeneration Aid as a Key Element for Safe Particulate Trap Use
Technical Paper
2001-01-3199
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper reports on the development of cost effective active regeneration aids as a “worst case solution” for implementation in diesel particulate traps, particularly with respect to long time vehicle operation in the inner-city at very low exhaust gas temperature level.
Two different principles of active measures were investigated: heating the entire exhaust gas by fuel burner to initiate the soot burning or applying so called “hot spot” heating by electrical heaters to start the regeneration of the loaded trap. Both methods may be combined with engine management measures to lower the necessary energy input.
Based on this investigation, several systems have been developed and tested on modern diesel engines for passenger cars at steady state and dynamic operation at difficult conditions such as low speed and very low load close to idle. Advantages and disadvantages of the systems are reported.
Recommended Content
Authors
Citation
Zelenka, P., Schmidt, S., and Elfinger, G., "An Active Regeneration Aid as a Key Element for Safe Particulate Trap Use," SAE Technical Paper 2001-01-3199, 2001, https://doi.org/10.4271/2001-01-3199.Also In
References
- Künzli N. at al Public-health impact of outdoor and traffic-related air pollution assessment The Lancet 2000 356 795
- NN Government to caught up over air pollution Mainichi Shimbun Feb. 1 2000
- Samet Dominici Curriero Coursac Zegar Fine particulate Air Pollution and Mortality in 20 U.S. Cities, 1987 - 1994 The New England Journal of Medicine Dec. 14 2000
- Yumlu S.V. Particulate traps: some progress, some problems SAE paper 880347
- Salvat O. Marez P. Belot G. Passenger Car Serial Application of a Particulate Trap System on a Common Rail Direct Injection Diesel Engine SAE paper 2000-01-0473
- Lemaire J. Mustel W. Zelenka P. Fuel Additive Supported Particulate Regeneration Possibilities by Engine Management System Measures SAE paper 942069
- Zelenka P. Reczek W. Mustel W. Rouveirolles P. Towards Securing the Particulate Trap Regeneration: A system Combining a Sintered Metal Filter and Cerium Fuel Additive SAE paper 982598
- Zelenka P. Egert M. Cartellieri W. Ways to meet future emission standards for heavy Sport Utility Vehicles - SUV FISITA World Automotive Congress Seoul 2000 Paper F2000H180
- Zelenka P. Aufinger H. Reczek W. Cartellieri W. Cooled EGR - A Key Technology for Future Efficient HD Diesels SAE paper 980190
- Twigg M. Trends in Light Duty Diesel Emissions. Corning's Clean Diesel Workshop Sept. 2000 Germany
- Cooper B. Thoss J. Role of NO in Diesel Particulate Emission Control SAE paper 890404
- Ohno K. at al Characterization of SIC-DPF for Passenger Car SAE paper 2000-01-0185
- Suto H. Mikami T. Hirai H. Hori M. Evaluation of diesel particulate filter systems for city busses SAE 910334
- Kugland P. Ulmer A. Zilmans R. Verkehr Technik 12 1989
- Kugland P. Krieger E. Santiago E. Cleaner Diesels - Full Flow Soot Filter Regeneration System SAE paper 910133
- Okazoe H. Shimizu K. Watanabe Y. Santiago E. Kugland P. Ruth W. Development of a Full-Flow Burner Regeneration Type Diesel Particulate Filter Using SiC Honeycomb SAE paper 960130
- Houben H. at al The Optimized Deutz Service Diesel Particulate Filter System DFS II SAE paper 942264
- Breuer K. Deutz Particulate Filter Systems Canadian Mining Diesel Conference (CANMET) Toronto Oct. 1998