This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Prerequisites for Extensive Computer Manikin Analysis – An Example with Hierarchical Task Analysis, File Exchange Protocol and a Relational Database
Technical Paper
2001-01-2101
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this case study, a human factors engineering (HFE) analysis was carried out in the preliminary design phase of the Cupola. Cupola is a European Space Agency (ESA) module for manned space flights for the International Space Station (ISS) as part of a Barter Arrangement between ESA and the United States National Aeronautics and Space Administration (NASA). Manikin software was used early in the design process before the production of any flight hardware. The manikin analysis was supported by the use of hierarchical task analysis, a file exchange protocol and a relational database. This paper describes methodological aspects of the use of the supporting methods. Results show that hierarchical task analysis, a file exchange protocol and a relational database are prerequisites for successful extensive manikin analysis.
Authors
- Anders Sundin - National Institute for Working Life - West Chalmers University of Technology
- Marianne Törner - National Institute for Working Life - West Chalmers University of Technology
- Magnus Rönnäng - National Institute for Working Life - West Chalmers University of Technology
- Tania Dukic - National Institute for Working Life - West Chalmers University of Technology
- Constanze Wartenberg
- Hans Sjöberg - Chalmers University of Technology
- Roland Örtengren - Chalmers University of Technology
- Joakim Frid
Citation
Sundin, A., Törner, M., Rönnäng, M., Dukic, T. et al., "Prerequisites for Extensive Computer Manikin Analysis – An Example with Hierarchical Task Analysis, File Exchange Protocol and a Relational Database," SAE Technical Paper 2001-01-2101, 2001, https://doi.org/10.4271/2001-01-2101.Also In
SAE 2001 Transactions Journal of Passenger Cars - Mechanical Systems
Number: V110-6; Published: 2002-09-15
Number: V110-6; Published: 2002-09-15
References
- Choon, H. N. Ek, L. T. 1990 Computer-aided workplace design and line balancing Karwowski, W Genaidy, A. M. Asfour, S. S. Computer Aided Ergonomics Taylor and Francis London 181 193
- Stammers, R. B. Carey, M. S. Astley, J. A. 1990 Task Analysis Wilson, J. R. Corlett, E. N. Evaluation of the human work. A practical ergonomics methodology Taylor and Francis London
- Annett, J. Stanton, N. A. 1998 1529 1536
- Porter, J. M. 1990 Man Models and Computer-aided Ergonomics Mattila M. Karwowski W. Computer Applications in Ergonomics, Occupational Safety and Health Elsvier Science Publishers B.V. Amsterdam
- McDaniel, J. W. 1990 Models for ergonomic analysis and design: COMBIMAN and CREW CHIEF Karwowski, W Genaidy, A.M. Asfour, S.S. Computer Aided Ergonomics Taylor and Francis London
- Stuart, M. A. Smith, R. L. 1990 Computer-aided design applied to the Flight Telerobotic Sevicer user interface Karwowski, W Genaidy, A.M. Asfour, S.S. Computer Aided Ergonomics Taylor and Francis London
- Eriksson, J. Johansson, G. 1996 Adaptation of workplaces and homes for disabled people using computer aided design International Journal of Industrial Ergonomics 17 153 162
- Sundin, A. Christmansson, M. Cyrén, H. Larsson, M. 1999 Participatory ergonomics influencing the processes of product and production design Proc. The 15 th International Conference on Production Research ICPR-15, 9 th to 13 th August 1999
- Burnette, C. Schaaf, W. 1998 Issues in using Jack® human figure modeling software to assess human/vehicle interaction in a driving simulator Transportation Research Board, 77 th Annual Meeting January 11–15 1998 Washington, DC
- van der Meulen, P. A. Koster, J. W. A. Oudenhuijzen, A. J. K. Bosch, M. de Jong, R. van Buchem, P. 1999 A Case Study: Use of Human Models in the Evaluation of Driver Workspaces in Relation to Dutch Anthropometrics In proc. Digital Human Modeling Conference The Haag 1999
- Hamilton, G. S. 1997 Ergonomic microgravity glove box design using computer human models In proc. U.S.-Russia Space Research Symposium. An Interchange with the Science and Technology Advisory Council November 10–14 1997 Huntsville, Alabama
- Hamilton, G. S. 1997 Conversion of IVA Human Computer Model to EVA Use and Evaluation and Comparison of the Result to Existing EVA Models In proc. U.S.-Russia Space Research Symposium. An Interchange with the Science and Technology Advisory Council November 10–14 1997 Huntsville, Alabama
- Whitmore, M. Chmielewski, C. E. Wheaton, A. Hancock, L. Beierle, J. 1999 Human Modeling Evaluations in Microgravity Workstation and Restraint Development In proc. CAES’99. International Conference on Computer-Aided Ergonomics and Safety Barcelona
- Hansson, L. Holmqvist, K. Sjölander, S. Distande, G. Andreoni, G. Colford, N. Engström, T. Hansson, G.-Å. Kadefors, R. Petersson, P. Rigotti, C. Sperling, L. Sundin, A. Östman, P. Akselsson R. 1998 Mannequin Properties for Ergonomic Evaluation of Car Interiors In proc. VR-MECH98/CLAWAR, 1998 Brussels
- Hansson, L. Andreoni, G. Palm, R. Wienholt, W. Costa, M. Lundin, A. Rizzuto, F. Akselsson, R. Engström, T. Gaia, E. Rigotti, C. Sperling, L. Sundin, A. Wolfer, B. 1999 ANNIE, a tool for integrating ergonomics in the design of car interiors SAE Technical Paper Series 1999-01-3372 , In Proceedings of the Southern Automotive Manufacturing Conference & Exposition
- Bellan, Y. Gaia, E. Rizzuto, F. 1999 ANNIE, the Application of Human Motion Capture Techniques and Cognitive Models for Ergonomics in Virtual Environments In proc. CAES’99. International Conference on Computer-Aided Ergonomics and Safety Barcelona
- Sundin, A. Christmansson, M. Örtengren, R. 2000 Methodological differences using a computer manikin in two case studies: Bus and space module design In proc. IEA 2000/HFES 2000 Congress. HFES (Santa Monica) 1 496 498
- Kirwan, B. Ainsworth, L. K. 1992 A guide to task analysis London Taylor & Francis
- Wartenberg, C. Törner, M. Frid, J. 2000