This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis of a F1 Car Hydraulic Circuit Dynamic Behavior
Technical Paper
2001-01-1162
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2001 World Congress
Language:
English
Abstract
This paper deals with the study of the dynamic behavior of a F1 car gear selection hydraulic circuit, when involved in different shift transients.
In the first part of the paper the actual circuit is described, and the main hypotheses adopted for the numerical modeling of the hydraulic power unit, of the control valves, of hydraulic pipes and of the actuators involved in the gear shift cycles are introduced. Particular attention is devoted to the actuators actual sequences, as applied by the Electronic Control Unit (ECU) to the servo-valves deputed to actuators control. The strategy to define each gear shift cycle in terms of actuators working position in time domain is chosen, using the frequency map of each servo-valve.
A numerical vs. experimental comparison of the behavior of the actuators involved in the gear selection (during about 50 ms for an up shifting and 100 ms for a down shifting) is performed, with the target to define the validity limits of the numerical model results.
Finally, the paper reports the analysis of those hydraulic variables not controlled by the on board diagnostic, with the aim to analyze the behavior of the power unit and of the pipes when submitted to the sudden hydraulic power request correspondent to a gear shift.
Recommended Content
Authors
Citation
Borghi, M., Milani, M., Piraccini, M., and Flandoli, M., "Analysis of a F1 Car Hydraulic Circuit Dynamic Behavior," SAE Technical Paper 2001-01-1162, 2001, https://doi.org/10.4271/2001-01-1162.Also In
SAE 2001 Transactions Journal of Passenger Cars - Mechanical Systems
Number: V110-6; Published: 2002-09-15
Number: V110-6; Published: 2002-09-15
References
- Balckburn J. F. Reethof G. Sharer J. Lowen Fluid Power Control John Wiley & Sons 1960
- Merrit H. E. Hydraulic Control System John Wiley & Sons 1967
- Krus P. Jansson A. Palmberg J. O. Modelling and Simulation of Complex Fluid and Mechanical Systems Proceedings of the Fifth Scandinavian International Conference on Fluid Power (SICFP '97) Linköping, Sweden 28-30 May 1997
- AMESim 1.5 User's Manual IMAGINE Investissement Roanne, France 1996
- Lebrun M. Richards C. How to create a good models without writing a single line of code Proceedings of the Fifth Scandinavian International Conference on Fluid Power (SICFP '97) Linköping, Sweden 28-30 May 1997
- Lebrun M. Richards C. Fargeton D. Proposal for a Re-usable Models Library Application to an Injection System for a Diesel Engine Proceedings of the 4 th JHPS International Symposium on Fluid Power Tokyo, Japan 15-17 November 1999
- Favennec, Minier P. Lebrun M. Analysis of the Dynamic Behaviour of the Circuit of a Common Rail Direct Injection System Proceedings of the 4 th JHPS International Symposium on Fluid Power Tokyo, Japan 15-17 November 1999
- Borghi M. Cantore G. Milani M. Valentini A. II 1665 1676 15-18 Settembre 1998
- Nozzle-flapper, Flow Control, Servovalves Moog Inc. New York, USA 1997
- Technical Hydraulic Handbook The Lee Company Connecticut, USA 1997