This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Impact Identification Using Smart Material Sensors
Technical Paper
2001-01-0615
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2001 World Congress
Language:
English
Abstract
The crash performance of an automobile largely depends on the ability to identity impact damage, maintain the passenger safety through deployment of various safety restraint systems, and steer away the vehicle from impact. So, this work is focused on the impact response of an automobile structure so as to find the location, magnitude of impact and asses the severity of damage. The results of the developed generalized forward plate model compared within 2% for FEM and previous other theoretical approaches. The inverse model compared within 7% for location and reconstructed force. Damage severity assessment is also investigated.
Recommended Content
Technical Paper | Engineering the Motorsport Engineer |
Technical Paper | Simulation and Analysis of Suspension and Aerodynamic Interactions of Race Cars |
Technical Paper | Crashworthiness of Circular Tubes with Structurally Graded Corrugations |
Authors
Citation
Peelamedu, S. and Naganathan, N., "Impact Identification Using Smart Material Sensors," SAE Technical Paper 2001-01-0615, 2001, https://doi.org/10.4271/2001-01-0615.Also In
SAE 2001 Transactions Journal of Passenger Cars - Electronic and Electrical Systems
Number: V110-7; Published: 2002-09-15
Number: V110-7; Published: 2002-09-15
References
- Peelamedu, S. M. Niemeyer, S. Naganthan, G. 1999 “Finite element analysis of smart material based deformable mirrors” International conference on the integration of dynamics, monitoring, and control 90 5809 112 0 A. A. Balkema Publication Rotterdam September 1-3 1999 539 547
- Peelamedu, S. M. Naganthan, G. Buckley, S. 1999 “Impact analysis of automotive structures with distributed smart material systems” SPIE Proceedings 3667 813 824
- Peelamedu, S. M. Naganthan, G. Leo, D. Dukkipati, R. 1997 “Energy absorption using smart materials during impact” Fifth applied mechanisms and robotics conference AMR97 055 001 008
- Castanien, K. E. Liang, C. 1996 “Application of active structural health monitoring technique to aircraft fuselage structures” SPIE Proceedings 2721 38 49
- Sun, F. P. Chaudhry, Z. Liang, C. Rogers, C. A. 1994 “Truss Structure integrity identification using PZT sensor-actuator” Second international conference on intelligent materials Technomic Publishing Co. Inc. 1210 1222
- Adams, R. D. Cawley, P. Pye, C. J. Stone, B. J. 1979 “A vibrational technique for nondestructively assessing the integrity of structures” Journal of mechanical engineering science 20 93 100
- Saunders, D. R. Kim, Y. I. Stubbs, N. 1992 “Non-destructive evaluation of damage in composite structures using modal parameters” Experimental mechanics 32 240 251
- Banks, H. T. Inman, D. J. Leo, D. J. Wang, Y. 1996 “An experimentally validated damage detection theory in smart materials” Journal of sound and vibration 191 5 859 880
- Cawley, P. Ray, R. 1988 “A comparison of the natural frequency changes produced by cracks and slots” Journal of vibration, acoustics, stress, and reliability in design 110 366 370
- Doyle, J. F. 1984 “An experimental method for determining the dynamic contact law” Experimental mechanics 24 1 10 16
- Mei, C. Decha-Umphai, K. 1985 “A finite element method for nonlinear forced vibrations of rectangular plates” AIAA journal 23 7 1104 1110
- Chang, C. Sun, C. T. 1989 “Determining transverse impact force on a composite laminate by signal deconvolution” Experimental mechanics 29 414 419
- Schonberg, W. P. Keer, L. M. Woo, T. K. 1987 “Low velocity impact of transversely isotropic beams and plates” International journal of solids and structures 23 7 871 896
- Tracy, M. Chang, F. K. 1996 “Identifying impact load in composite plates based on distributed piezoelectric sensor measurements” SPIE Proceedings 2717 231 234
- Cruz, J. D. Crisp, C. Ryall, T, G. 1986 “Determining a force acting on a plate - an inverse problem” AIAA journal 29 3 464 470
- Peelamedu, S. M. Naganathan, N. G. 1999 “Impact identification for metallic plate using distributed smart materials” Adaptive structures and material systems symposium - ASME International Mechanical Engineering Congress and Exposition 59 87 November 14-19 47 54
- Blevins, R. D. 1979 “Formulas for natural frequency and mode shape” 1st Van Nostrand Reinhold Company New York
- Qian, Y. Swanson, S. R. 1990 “A comparison of solution techniques for impact response of composite plates” Composite structures 14 177 192
- Peelamedu, S. M. Naganathan, N. G. 2000 “Smart automobiles through smart sensors” International conference on intelligent flexible autonomous manufacturing systems January 10-12 2000
- Peelamedu, S. M. Naganathan, N. G. Dukkipati, R. V. 1999 “Impact identification mechanism using smart materials” Sixth applied mechanisms and robotics conference December 12-15 1999
- Reismann, H. 1988 “Elastic plates: Theory and application” 1st John Wiley and Sons New York
- Szilard, R. 1974 “Theory and analysis of plates” 1st Prentice Hall Inc. New Jersey
- Magrab, E. B. 1979 “Vibrations of elastic structural members” 1st Sijthoff & Noordhoff International Publishers B. V. The Netherlands
- Polyanin, A. D. Manzhirov, A. V. 1998 “Handbook of integral equations,” 1st CRC Press New York
- Golberg, M. A. Chen, C. S. 1997 “Discrete projection methods for integral equations” 1st Computational mechanics publications Southampton, UK
- Peelamedu, S. M. Naganathan, N. G. Dukkipati, R. V. 1999 “Active strain transfer analysis in a piezoceramic system using finite element method and experimental work” Journal of smart materials and structures 8 5 654 662