This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Front Wheel Vibrations: A Hydraulic Point of View - Models and First Results
Technical Paper
2001-01-0490
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE 2001 World Congress
Language:
English
Abstract
Even if the brake judder is an often analyzed problem from the mechanical point of view, its influence on the hydraulic elements such as the braking and steering systems is not fully established. The aim of this paper is to present models of the hydraulic components connected to a model of the front suspension and thus having a view of the influence of these hydraulic elements on the amplification of the brake judder vibrations. Each models of the front suspension, the braking circuit and the hydraulically powered steering assistance are validated separately versus or measurements or other softwares. The introduction of the disc thickness variation (DTV) generates the braking judder of interest. Some first simulation results are shown to see couplings or influence of hydraulic components on vibration propagations.
Recommended Content
Authors
Citation
Alirand, M., Lebrun, M., and Richards, C., "Front Wheel Vibrations: A Hydraulic Point of View - Models and First Results," SAE Technical Paper 2001-01-0490, 2001, https://doi.org/10.4271/2001-01-0490.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
SAE 2001 Transactions Journal of Passenger Cars - Mechanical Systems
Number: V110-6; Published: 2002-09-15
Number: V110-6; Published: 2002-09-15
References
- Alirand M. “Bond graph analysis of a CITROEN suspension and conception of an active self levelling suspension” Université Claude Bernard Lyon, France 1991
- Alirand M. Wintrebert E. “Mechanical couplings between a car suspension and a hydraulic power steering system - A simulation study” 4 th IAVSD Workshop on Modelling and Simulation of Mechatronic Vehicles: Tools, Standards and Industry Demands Herbertov, Czech Republic May 1999
- Alirand M. Botelle E. Sau J. “Modeling a force control actuator for semi-active car damper: Pressure controlled valve analysis” 7 th Scandinavian Int. Conference on Fluid Power Linkoping, Sweden June 2001
- Allison D.J. Sharp R.S. “On the low frequency in-plane forced vibrations of pneumatic tyre/wheel/suspension assemblies” Proceeding of the 2 nd Int. Conference on Tyre Models for Vehicle Dynamic Analysis Berlin, Germany February 1997 151 162
- Ammon D. Gipser M. Rauh J. Wimmer J. “High performance system dynamics simulation of the entire system tire-suspension-steering-vehicle” Vehicle System Dynamics 27 1997 435 455
- Amphlett S.A. March J.P. “Studying low frequency vehicle phenomena using advanced modelling techniques - Part 1: Construction of a driveline model” Proceedings of the 1995 Noise and Vibration Conference, SAE paper nº 951270 1995 287 293
- Audenino A.L. Belingardi G. “Modeling the dynamic behaviour of a motorcycle damper” Proceedings of the IMechE, Part D: Journal of Automobile Engineering 209 1995 695 723
- Bakker E. Nyborg L. Pacejka H. “Tyre modelling for use in vehicle dynamics studies” Int. Congress and Exposition Detroit, MI February 1987 SAE paper nº 870421 1 15
- Bakker E. Pacejka H. Lidner L. “A new tyre model with an application in vehicle dynamics studies” SAE paper nº 890087 1987 83 95
- Botelle E. “Study on a semi active suspension including a hydraulic force control actuator” Université Claude Bernard Lyon, France 1997
- Botelle E. Alirand M. “Modelling a force control actuator for semi active car damper: Flow valve analysis” 5 th Int. Symposium on Advanced Vehicle Control Ann Arbor, MI, USA August 2000
- Botti J. Venizelos G. Benkaza N. “Optimization of power steering systems vibration reduction in passenger cars” SAE paper nº 951253 1995 1179 1201
- Brix F. Alirand M. “Bond graph representation of the manipulation of constraints equations in multibody software” 1 st Joint Conference of Int. Simulation Societies Zurich, Switzerland August 1994 649 653
- Cambois T. Jansson A. Sternini D. Celigueta J. Kricke C. Tirgari P. “Simulation of a car model in braking manoeuvers” Int. Workshop on Co Simulation of Dynamic Systems Braunschweig, Germany October 1999
- Celigueta J. Richards C.W. Moser E. “Coupling of CAE tools for mixed simulation of multi-domain systems in automotive applications” IFAC Conference on Mechatronic Systems Darmstadt, Germany September 2000
- Crolla D.A. Lang A.M. “Brake noise and vibration - The state of the art” 17 th Leeds-Lyon Symposium on Tribology Leeds, UK September 1990 165 174
- De Vries A. Wagner M. “The brake judder phenomenon” SAE paper nº 920554 1990 25 33
- Dyum S. Stiens R. Reybrouck K. “Evaluation of shock absorber models” Vehicle System Dynamics 27 1997 109 127
- Dzierzek S. “Experiment-based modelling of cylindrical rubber bushings for the simulation of wheel suspension dynamic behavior” SAE Paper nº 2000-01-0095 2000 29 35
- Eich E. Fuhrer C. Leimkuhler B. Reich S. “Stabilization and projection methods for multibody dynamics” Impact of Computing in Science and Engineering November 1990
- Gassmann S. Engel H.G. “Excitation and transfer mechanism of brake judder” 7 th Int. Pacific Conference and Exposition on Automotive Engineering Phoenix AR SAE paper nº 931880 November 1993 1 11
- Khan Y. Kulkarni P. Youcef-Toumi K. “Modeling, experimentation and simulation of a brake apply system” Trans. ASME, Journal of Dynamic Systems, Measurement and Control 116 March 1994 111 122
- Kim M. Jeong H. Yoo W. “Sensitivity analysis of chassis system to improve shimmy and brake judder vibration on steering wheel” SAE paper nº 960734 1996 59 70
- Kobiki Y. Kinoshita A. Yamada H. “An analysis of interior booming noise caused by tire and powertrain-suspension system vibration” JSAE Review 10 3 July 1989 40 45
- Kortum W Sharp R.S. de Pater A.D. “Application of Multibody Computer Codes to Vehicle System Dynamics” 12 th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks August 1991
- Lebrun M. Richards C.W. “How to create good models without writing a single line of code” 5 th Scandinavian Int. Conference on Fluid Power Linkoping, Sweden May 1997 19 32
- Lee K. “Numerical modelling for the hydraulic performance prediction of automotive monotube dampers” Vehicle System Dynamics 28 1997 25 39
- Loh W. White I. Rumpel M. Li D. “The application of experimental design method to brake induced vehicle vibrations” SAE paper nº 980902 1998 133 139
- Noguchi E. Nagata K. “Detection of vibration path in hydraulic power steering system” 4 th Japanese Hydraulic and Pneumatic Society Int. Symposium Tokyo, Japan November 1999 507 512
- Oustaloup A. “La commande CRONE: Commande Robuste d'Ordre Non Entier” Traité des Nouvelle Technologies HERMES Paris, France 1991
- Pacejka HB. Van der Berg J. Jillesma PJ. “Front wheel vibrations” Proceeding of the 5 th Vehicle System Dynamics and 2 nd IUTAM Congress September 1977 1 20
- Pacejka H.B. Bakker E. “The magic formula tyre model” 1 st Int. Colloquium on Tyre Models for Vehicle Dynamics Analysis Delft, The Netherlands October 1991 1 18
- Richards C.W. Chene M. “Analysis of power steering system through coupled multibody/hydraulic simulation using ADAMS/AMESim interface” 10 th European ADAMS User's Conference Frankfort, Germany November 1995
- Richards C.W. “Numerical challenges posed by modelling hydraulic systems” Forum on Design Languages Lausane, Switzerland 1998 1 8
- Richards C.W. Gagne D. “Simulation of fluid power systems - What's so special?” Int. Workshop on Computer software for Design, Analysis and Control of Fluid Power Systems Trondhein, Norway February 1999 1 13
- Rousset J.M. “Modelling tool for vehicle road behaviour interactive simulation (SARA driving simulator)” 2 nd Congrès Int. sur l'Apport du Calcul Scientifique en Conception Automobile Palaiseau, France February 1993 67 71
- Smith J.M. Ferries G.R. Arbanas R.L. “An analytical control systems approach to steering shudder” SAE paper nº 951254 1995 151 155
- Takeuchi Y. Haga K. Hattori K. Saito K. “Analysis of pressure pulsation in a power steering system” 3 rd Japanese Hydraulic and Pneumatic Society Int. Symposium Tokyo, Japan 1996 609 612
- Ulrich H. Böcker M. Kett R. “Simulation for optimization of servo steerings” 13 th Aachen Colloquium on Fluid Technics Aachen, Germany March 1998 411 432
- Van Der Jagt P. Pacejka H. B. Savkoor A.R. “Influence of tyre and suspension dynamics on the braking performance of an anti-lock system on uneven roads” IMechE proceeding, Paper nºC382/047 1989 453 460
- Van Zanten A. Erhardt R. Lutz A. “Measurement and simulation of transients in longitudinal and lateral tire forces” SAE Paper nº 900210 1990 300 318
- Willumeit H.P. Böhm F. “Wheels vibrations and transient tire forces” Vehicle System Dynamics 24 1995 525 550
- Wilson B.H. Stein J.L. “An algorithm for obtaining proper models of distributed and discrete systems” Trans. ASME, Journal of Dynamic Systems: Measurement and Control 117 December 1995 534 540
- Zegelaar P.W.A. Gong S. Pacejka H.B. “Tyre models for the study of in-plane dynamics” Proceedings of the 13 th IAVSD Symposium Chengdu, P.R. China August 1993 578 590
- Zegelaar P.W.A. Pacejka H.B. “Dynamic tyre responses to brake torque variations” Proceeding of the 2 nd Int. Conference on Tyre Models for Vehicle Dynamic Analysis Berlin, Germany February 1997 65 79