This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Determination of Weld Line Characteristics in Tailored Blanks
Technical Paper
2000-01-2661
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The use of tailored blanks by the automotive industry is a fact. New applications that use tailored blanks and improvements on existing uses are continuously being created. In order to get the most out of all the advantages of tailored blanks in the quickest and most cost effective manner an understanding of the weld and its behaviour under forming conditions is required. The purpose of this paper is to review existing formability tests for tailored blanks and to summarize current research at Queen's University toward the development of the methods that focus on the characteristics of the weld line.
Authors
- Marc Auger - Department of Mechanical Engineering, Queen's University
- Kassim Abdullah - Department of Mechanical Engineering, Queen's University
- Jack Jeswiet - Department of Mechanical Engineering, Queen's University
- Peter Wild - Department of Mechanical Engineering, Queen's University
- Lynann Clapham
Citation
Auger, M., Abdullah, K., Jeswiet, J., Wild, P. et al., "Determination of Weld Line Characteristics in Tailored Blanks," SAE Technical Paper 2000-01-2661, 2000, https://doi.org/10.4271/2000-01-2661.Also In
References
- Mielnik, Edward M. “Metalworking Science and Engineering.” New York McGraw-Hill 1991
- Ayres, Robert A. Brazier, Willliam G. Sajewski, Vincent F. “Evaluating the GMR-Limiting Dome Height Test as a New Measure of Press Formability Near Plane Strain.” J. Applied Metal Working 1 1 41 49 1979
- Scrivens, P.J. Brandon, J.A. Williams, N.T. “Influence of weld orientation on forming limit diagram of similar/dissimilar thickness laser welded joints.” Ironmaking and Steelmaking 23 2 177 182 1996
- Winter, Arjan de “Environmental Aspects of Sheet Metal Forming.” Ph.D. Thesis, Technical University Eindhoven Netherlands 1998
- Thompson, R. “The LDH Test to Evaluate Sheet Metal Formability - Final Reprot of the LDH Committee of the North American Deep Drawing Research Group.” SAE Paper No. 930815 1993
- Izworski, N. Graf, A.F. “Obtaining LDH Stability.” SAE Paper No. 910512 1991
- Graf, A.F. Izworski, N. “Industrial Implementation of Practices for LDH Stability.” SAE Paper No. 930816 1993
- Yoshida, M. Kabasawa, Yamasaki, Y. Ono, M. “Formability of Laser-Welded Steel Sheets.” NKK Technical Review 72 25 32 1995
- Scrivens, P.J. Brandon, J.A. Williams, N.T. “Relative influence of sheet rolling direction and weld orientation on formability of laser welded steel sheet.” Ironmaking and Steelmaking 24 1 79 83 1997
- Yoshida, M, Yamasaki, Y, Kabasawa, Ono, M. “Formability of Laser-Welded Steel Sheets.” NKK Technical Review 72 25 32 1995
- Siles, J.L. Wagoner, R. Narasimhan, K. Miles, M.P. “A Better Sheet Formability Test.” Metallurgical Transactions A 24A 1143 1151 1993
- Wang, W. Wagoner, R. Siram, S. “Development of OSU Formability and OSU Friction Test.” J. of Materials Processing Technology 45 13 18 1994
- Saunders, F.I. Wagoner, R.H. “Forming of Tailor-Welded Blanks.” Metallurgical and Materials Transactions A 27A 2605 2616 1996
- Kim, Y.S. Park, K. “A Plane Strain Punch Stretching Test for Evaluating Formability of Steel Sheets.” Metallurgical and Materials Transactions A 25A 2199 2205 1994
- Kim, Y.S. Ha, D.H. “Design of Optimized Tool Geometry for the P.S.S. Test with Finite Element Simulation.” SAE Paper No. 980444 1998
- Raghavan, K.S. “A Simple Technique to Generate IN-Plane Forming Limit Curves and Selected Applications.” Metallurgical and Materials Transactions A 26A 2075 2084 1995
- Wong, C, Wagoner, R. Wenner, M.L. “Corner Design in Deep Drawn Rectangular Parts.” SAE Paper No. 970437 1997
- Hosford, William. F. Caddell, Robert M. “Metal forming: mechanics and mettalurgy.” Englewood Cliffs, NJ: Prentice-Hall 1983
- Hutchings, M.T. Krawitz, A.D. “Measurement of Residual and Applied Stress Using Neutron Diffraction” NorthHolland, Amsterdam 1992