This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Application of Simulation and Knowledge Processing in Contamination Control
Technical Paper
2000-01-2616
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Hydraulic power control systems are universally used in automotive, aerospace, machine tools, earthmoving and other areas of engineering due to their advantages over other systems in providing flexible and accurate control of motion and forces. These advantages are, however, always accompanied by the disadvantage of having to control contamination in hydraulic power systems. The paper discusses current progress in the application of knowledge-based techniques, in combination with dynamic modelling and simulation, to the design of contamination control in hydraulic systems. Examples of knowledge based filtration design software and a contamination control system which uses fuzzy knowledge-based techniques are discussed in some detail.
Recommended Content
Technical Paper | Maintaining the Cleanliness of Clean Parts |
Technical Paper | An Agriculture Equipment Manufacturer's Approach to Assure a Clean Hydraulic System |
Technical Paper | Automatic Generation of Production Quality Code for ECUs |
Authors
Citation
Stecki, J. and Schoenau, G., "Application of Simulation and Knowledge Processing in Contamination Control," SAE Technical Paper 2000-01-2616, 2000, https://doi.org/10.4271/2000-01-2616.Also In
References
- Fitch, E.C An Encyclopaedia of Fluid Contamination Control for Hydraulic Systems Hemisphere Publishing Corp. 1979
- Bradley D.A Bradshaw D.W. Seward D.W. Margrave F. Mechatronics and Intelligent Systems Proc. 2nd Intl. Conf. Intelligent System Engineering 395 400 Hamburg 1994
- Mann H. Van Brussel H. Metamodel and Design Methodologies for Mechatronics Proc. Intl Conf. on Machine Automation 671 686 Tampere 1994
- Virvalo T. Distributed Motion Control in Hydraulics and Pneumatics Mechatronics 2 3 277 288 1992
- Salminen V. Verho A. Systematic and Innovative Design of a Mechatronic Systems Mechatronic 2 3 239 256 1992
- McCulloch W. Pitts W. A Logical Calculus of the Ideas Immanent in Nervous Activity Bulletin of Mathematical Biophysics 115 133 1943
- Minsky M. Papert S. Perceptrons: An Introduction to Computational Geometry Cambridge The MIT Press 1969
- Hopfield J. J. Neural Networks and Physical Systems with Emergent Collective Computational A bili ties Proc. National Academy of Science 79 2554 2558 April 1982
- Rumelhart D. E. McClelland J. L. Parallel Distrubuted Processing: Explorations in the Microstructure of Cognition I Cambridge, Mass MIT Press 1986
- Kohonen T. Associative Memory Berlin Springer-Verlag 1977
- Melsa, P. “Neural Networks: A Conceptual Overview” Tellabs Research Centre Report TRC-89-08 1989
- Maren, A. Harston, C. Pap, R. Handbook of Neural Computing Applications Academic Press, Inc London 1990
- Lippman R. P. An Introduction to Computing with Neural Nets IEEE ASSP Magazine 4 22 April 1987
- Liu, P. Dransfield, P. Stecki, J. Neural Nets - Their Potential for Intelligent Control of Fluid Power Drives 10 Aachener Fluidtechnisches Koloquium 407 417 Aache 1992
- Burton R. T. Harte A. M. Sargent C. M. Schoenau G. J. An Attempt to Control a Hydraulic Circuit Using an Artificial Neural Network Proc. Fourth Bath International Fluid Power Workshop University of Bath U.K. 1991
- Park H. J. Cho H. S. A CMAC-Based Interative Learning Control for Hydraulic Servo Systems Proc. Fluid Power Control and Robotics Chengdu, China 439 444 October 1990
- Zahed, L. A. Fuzzy Sets, Information and Control 8 338 353 1965
- Hong, T. Fitch, J.C. “Model of Fuzzy Logic Expert System for Real-Time Condition Control of a Hydraulic System” Proc. 3rd Intl. Conf. on Machine Condition Monitoring Windsor, U.K. 1990
- Liu, C. A System Approach to Monitoring and Controlling of Contamination/Wear in Hydraulic Control Systems Monash University Australia 1995
- Liu, C. Stecki, J.S. Dransfield, P. “Dynamic Contamination Control Model for Fluid Contamination” Proc. of Intl. Conf. on Fluid Power Control and Robotics 342 247 Chengdu, China 1990
- Stecki J.S. Liu C. Modelling and Simulation of Contamination in Fluid Power Control Systems The Fourth Scandinavian International Conference on Fluid Power, SICFP'95 Tampere 356 368 1995
- Visual Solutions Inc. Vissim User's Manual 1.5 Westford, Ma 1999
- Jensen Jens P. The Distribution of Contaminants Through a Hydraulic Circuit The University of Science and Technology Trondheim 1996
- Stecki, J.S. Liu, C. “Selection of Filters for Hydraulic Control Systems” Proc. Intl Conference on Maintenance Management 27 Melbourne Sept 1991
- Liu, C. Dransfield, P. Stecki, J.S. Expert System Aided Filtration System Design Supplement Proc. 3rd (ICFP) Intl Conference on Fluid Transmission and Control 6 11 Hangzhou, China Sept 1993
- Stecki J. S. Liu C. Computer-aided Techniques in Contamination Control, Design and Performance Eight Bath Intl Fluid Power Workshop 126 140 Bath, UK Research Studies Press & John Wiley and Sons 0 471 96128 0 1996
- Fitch, J.C. Quantifying the Contaminant Tolerance of hydraulic systems using the “Contaminant Life Index” Proc of 41st Conference on Fluid Power 203 212 Chicago April 1986
- Guru Expert System Management- Version 3 Micro Data Base System, Inc. Lafayette 1991
- Liu, C. Dransfield, P. Stecki, J.S. PCEX - Expert System for Evaluating Pump Contamination Sensitivity Proc 2nd JHPS International Symposium on Fluid Power 527 532 Tokyo Sept 1993
- Liu, C. Stecki, J.S. “Knowledge-base for Evaluation of Pump Wear Tolerance” The Bulletin of Centre for Machine Condition Monitoring 5 130 135 Nov 1993
- Bensch, L.E. Bonner, W.T. “Field System Contaminants - Where, What, How Much” Proc. Seventh Annual Fluid Power Research Conference, paper P73-CC-1 187 193 Oct. 1973
- Tessman, R.K. Fitch E.C. “Field Contaminant Ingression Rates - How Much?” Proc. Eight Annual Fluid Power Research Conference, paper P74-47 Oct. 1974
- Liu C. Stecki J.S. Intelligent Expert System for Contamination Control in Hydraulic Control Systems Proc. 6th Intl Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems 538 543 Edinburgh June 1993
- Tessman, R.K. “Component Contaminant Generation” Proc. Eight Annual Fluid Power Research Conference, paper P74-46 Oct. 1974
- Liu, C. Kuhnell, B.T. “The Comparison and Development of On-line Wear/Contamination Monitors” The Bulletin of Centre for Machine Condition Monitoring 4 1 20.1 20.8 1992
- Kuhnell B.T. Stecki, J.S. Monitoring of Hydraulic System Proc. 2nd Intl. Fluid Power Conference 729 734 Hanghzou, China March 1989
- Pek, C.H. Stecki, J.S. “On-Line Contamination Monitoring Using Nephelometry” Proc. 2n Intl Machinery Monitoring and Diagnostic Conference 121 125 Los Angeles 1990
- Raw, I. Hunt, T. “On-line Debris Monitoring-the Way Ahead” Proc. of 2nd Intl. Conf. on Condition Monitoring 29 40 London May 1988
- Backé, W. “Wear Sensitivity of Hydraulic Displacement Units to Solid Contaminats” Ölhydraulik und Pneumatik 33 6 29 38 1989
- Tessman, R.K. “Speed is not a Factor in the Contaminant Wear of Hydraulic Pumps” BFPR J. 1 11 1979
- Silva, G. “Wear Generation in Hydraulic Pumps” SAE Technical Paper, 9011679 1990