This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Understanding Diesel Lubricity
Technical Paper
2000-01-1918
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Diesel fuel injection pumps are lubricated primarily by the fuel itself. Traditionally, fuel viscosity was used as a rough indicator of a fuel's ability to provide wear protection, but since the advent of low sulphur diesel, even some fuels of higher viscosity have been found capable of producing wear. This paper provides further insights into the main contributors to diesel fuel lubricity, their source and the impact of refinery processing. The most effective way to monitor lubricity is also considered. We have found that diesel lubricity is largely provided by trace levels of naturally occurring polar compounds which form a protective layer on the metal surface. Typical sulphur compounds do not confer this wear protection themselves rather it is the nitrogen and oxygen containing hetero-compounds that are most important. A complex mixture of polar compounds is found in diesel and some are more active than others. The process of hydrotreating to reduce sulphur levels also destroys some of these natural lubricants. Other refinery processes also influence the concentration of the lubricity agents in the final fuel blend. Lubricity additives have been developed to compensate for the deterioration in natural lubricity observed in low S diesels. The interaction between natural polars and lubricity additive has been investigated and the findings may explain why some poor lubricity fuels are more responsive to lubricity additive than other. Difficulties are encountered when using knowledge of refinery streams to predict the lubricity of a diesel blend. The most effective way to monitor lubricity performance is by making measurements on the finished fuels. Vehicle tests have shown that the High Frequency Reciprocating Rig is a good indicator of diesel lubricity performance.
Recommended Content
Technical Paper | The No-Harm Performance of Lubricity Additives for Low Sulphur Diesel Fuels |
Technical Paper | Fuel Lubricity: Statistical Analysis of Literature Data |
Technical Paper | Diesel Fuel Lubricity - Base Fuel Effects |
Authors
Topic
Citation
Barbour, R., Rickeard, D., and Elliott, N., "Understanding Diesel Lubricity," SAE Technical Paper 2000-01-1918, 2000, https://doi.org/10.4271/2000-01-1918.Also In
References
- Caprotti R. et al Additive technology as a way to improve diesel fuel quality SAE 922183
- Farrell A. Elliot N.G. Vehicle tests for LSADO IMechE 1996 219
- Davenport J.N. et al The lubricity of hydrotreated diesel fuels IMechE 1996 207
- Wang J.C. Reynolds D.J. The lubricity requirement of low sulphur diesels SAE 942015
- Bovington C. et al Development of a laboratory test to predict lubricity properties of diesel fuels and its application to the development of highly refined diesel fuels Tribotest Journal 2-2 1995 93 112
- Lacey P.I. Development of a Lubricity test Based on the Transition from Boundary Lubrication to Severe Adhesive Wear in Fuels Lubrication Engineering 1994 50 10 749
- Jenkins S.R. Landells R.G.M. Hadley J.W. Diesel Fuel Lubricity Development of a constant Load Scuffing Test Using the Ball on Cylinder Lubricity Evaluator (BOCLE) SAE 932691
- Voitik R.M. Ren N. Diesel Fuel Lubricity by Standard Four ball Apparatus Utilizing Ball on Three Disks BOTD SAE 950247
- Eleftherakis J.G. Harrigan M.J. Tao X. Development of a benchtop fuel lubricity assessment method SAE 941915
- Cooper D. Laboratory screening tests for low sulphur diesel fuel lubricity Lubrication Science 1995 7 133 148
- Galbraith R.M.C. Hertz P.B. The BOCLE test for Diesel and Bio-Diesel Fuel Lubricity SAE 972862
- Wei D. The lubricity of Fuels I, Wear Studies on Diesel Fuels J. of Petrol. (Pet. Processing.) 1990 6 1 15
- Mitchell K. The lubricity of winter diesel fuels SAE 952370
- Mitchell K. Diesel fuel lubricity: a survey of 1994/95 Canadian winter diesel fuels SAE 961181
- Wang J.C. Reynolds D.J. The lubricity requirement of low sulphur diesels SAE 942015
- Cusano C.M. Flaherty R.W. Roush A.N. Survey of winter '93 low sulphur diesels in the US market SAE 942013
- Wang J.C. Cusano C.M. Predicting lubricity of low sulphur diesel fuel SAE 952564
- Lacey P.I. Westbrook S.R. Diesel fuel lubricity SAE 950248
- Wei D. Spikes H.A. The lubricity of diesel fuels Wear 1986 111 217 235
- Wei D. The lubricity of Fuels II, Wear Studies using model compounds J. of Petrol. (Pet. Processing.) 1988 4 1 90
- Wei D. Han X. Wang R. The influence of chemical structure of certain nitrogen-containing organic compounds on their antiwear effectiveness: the critical role of the hydroxyl group Lubrication Science 1989 2 1 63 87
- Omata T. et al Effective compounds on Lubricity of Diesel Gas Oil Sekiyu Gakkaishi 1998 41 1
- Tucker R.F. et al The lubricity of deeply hydrogenated diesel fuels - The Swedish experience SAE 94016
- Robbins W.K. McElroy F.C. Systematic Evaluation and Development of Adsorption Chromatographic techniques for Coal Liquid Analysis Liquid Fuels technology 2 2 113 154 1984
- Hsu C.S. Qian K. Robbins W.K. Nitrogen Speciation of Polar Petroleum Compounds by Compound Class Separation and On-Line Liquid Chromatography - Mass Spectrometry (LC-MS) Journal of High Resolution Chromatography 17 April 1994
- Zhu D. Suhr H. Shen Y.R. Phys. Rev. Lett. 35 3047 1987