This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Advanced Tools for Analysis of Gasoline Direct Injection Engines
Technical Paper
2000-01-1903
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
A methodology which uses simultaneously 3D calculations and advanced experimental tools has been developed in order to characterize air-fuel mixing and combustion of gasoline direct injection engines at every stage of development. The analysis of Mitsubishi GDI engine has been carried out in order to validate this approach. The experimental tools used in this analysis underline the great cycle-to-cycle variability and show that the air-fuel ratio variations at spark plug correlate closely with the fluctuations of combustion starting and development. Despite this variability, average measurements are reproducible and in good agreement with 3D computational results obtained with KIVA-MB code. The common use of both kinds of tools allows to get a very fine understanding of Mitsubishi wall-guided concept.
Recommended Content
Authors
- M. Castagné - IFP
- E. Chevé - IFP
- J. P. Dumas - IFP
- S. Henriot - IFP
Citation
Castagné, M., Chevé, E., Dumas, J., and Henriot, S., "Advanced Tools for Analysis of Gasoline Direct Injection Engines," SAE Technical Paper 2000-01-1903, 2000, https://doi.org/10.4271/2000-01-1903.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
4 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Zhao F. Lai M.C. Harrington D.L. “A review of Mixture Preparation and Combustion Control Strategies for Spark Ignited Direct Injection Gasoline Engines” SAE paper 970627 1997
- Zhao F. Lai M.C. Harrington D.L. “Automotive spark-ignited direct-injection gasoline engines” Progress in Energy and Combustion Science 25 1999
- Kume T. Iwamoto Y. Murakami M. Akishino K. Ando H. “Combustion Control Technologies for Direct Injection SI Engine” SAE paper 960600 1996
- Iwamoto Y. Noma K. Nakayama O. ando H. “Development of Gasoline Direct Injection Engine” SAE paper 970541 1997
- Ando H. Noma K. Lida K. Nakayama O. Yamauchi T. “Mitsubishi GDI Engine Strategies to Meet the European Requirements” Engine and Environment Conference 97 Graz, Austria 1997
- Ando H. et al “Mixture Preparation in Gasoline Direct Injection Engines” FISITA paper F98T050 1998
- Crawford J.G. Wallace J.S. “Validation Tests for a Fast Response Flame Ionisation Detector for In-Cylinder Sampling Near the Spark Plug” SAE paper 961201 1996
- Kakuhou A. Urushihara T. Itoh T. Takagi Y. “Characteristics of Mixture Formation in a Direct Injection SI Engine with Optimezed In-cylinder Swirl Air Motion” SAE paper 1999-01-0505 1999
- Summer T. Collings N. “Modelling the Transit Time of a Fast Response Flame Ionisation Detector During In-Cylinder Sampling” SAE paper 950160 1995
- Collings N. Cheng Wai K. Galliot F. “On the Time Delay in Continuous In-Cylinder Sampling From IC Engine” SAE paper 890579 1989
- Peckham M. Collings N. “FID Capillary Flow Theory Seminar proceedings” Institution of Mechanical Engineers London 1994
- Duclos J-M. Zolver M. “3D Modeling of Intake, Injection and Combustion in a DI-SI-engine under Homogeneous and Stratified Operating Conditions” Comodia 98 1998
- Pasquereau M. Papagni J-F. Montagne X. “Determination of C1-C13 Hydrocarbons in Automotive Emissions using a Dual GC-FID with a Specific Sampling Pre-concentration Trap” International Combustion Engines: Experiments and Modeling 1997
- Takagi Y. “Combustion characteristics and research topics of in-cylinder direct injection gasoline engines” Proceedings of the 73 rd JSME Annual Meeting 1996
- Anderson R. Yang J. Brehob D. Yi J. Han Z. Reitz R. “Challenges of stratified charge combustion” Essen 1997