This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evaluation of Used Lubricant Behaviour in Industrial Vehicles Engines in the 1990s
Technical Paper
2000-01-1824
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents a study and review of the data collected in an Engine Fault Diagnosis System using oil analysis, used for diagnose different industrial vehicle engines (trucks, buses, road construction equipment, etc.). This system is being used since the beginning of the 1990s decade.
The information acquired in this system has generated an important database that collects the information about the oil status at drain moment and further collateral information.
Knowledge about oil properties (viscosity, TBN, detergency), and oil contamination, (insolubles content, soot from combustion, fuel dilution, and water) during engine operation, provide an important information about lubricants efficiency, optimal drain period and engine status that it has a direct influence on vehicles running cost.
The study has been performed with a statistical tool which allows the characterisation of the main parameters of oil behaviour, in addition to the relationship between them.
The results obtained can be used to provide suggestions about the oil formulation to obtain optimal capabilities in the use of them on future engines
Recommended Content
Authors
Topic
Citation
Macián, V., Tormos, B., and Lerma, J., "Evaluation of Used Lubricant Behaviour in Industrial Vehicles Engines in the 1990s," SAE Technical Paper 2000-01-1824, 2000, https://doi.org/10.4271/2000-01-1824.Also In
References
- Macian, V. Lerma, Ma J “An oil contamination normalization method for an engine fault diagnosis system” SAE paper 971691 1997
- Macian, V. Lerma, Ma J Tormos, B. “Oil Analysis evaluation for an Engines Fault Diagnosis System” SAE paper 1999-01-1515 1999
- “Handbook of Condition Monitoring” Elsevier Advanced Technology Oxford 1996 1-85617-234-1
- Collacot, R. A. “Mechanical fault diagnosis and condition monitoring” Chapman and Hall New York 1982
- Fygueroa, S. “Diagnóstico del desgaste y el estado de motores de encendido por compresión” Servicio de Publicaciones Universidad Politécnica de Valencia
- Caines A. Haycock R. “Automotive Lubricants Reference Book” SAE International Warrendale 1-56091-525-0
- Needelman, W. Madhavan, P. “Review of Lubricant contamination and diesel engine wear” SAE Paper 881827 1988
- Publications de L'Institut Français du Pétrole “Methodes rapids d'analyse des huiles usagées” Editions Technip Paris 1971
- Muñoz, M. Payri, F. “Motores de combustion interna alternativos” Sección de publicaciones de la ETSII Fundación de la UPM 84-86451-01-9