This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Increasing Productivity in 5-Axis Milling of IBR's Using Force Modeling and Control
Technical Paper
2000-01-1694
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Milling of turbine engine compressors is very complicated due to tight part tolerances, high flexibility of tool and part, large cutting forces and low machinability of titanium alloys. Cutting feedrates are limited due to high cutting forces resulting from deep immersions. Milling cycle times can be reduced using milling force modeling which is presented in this paper. Application of a simplified force model is demonstrated through several examples.
Recommended Content
Authors
Citation
Budak, E. and Jolin, Y., "Increasing Productivity in 5-Axis Milling of IBR's Using Force Modeling and Control," SAE Technical Paper 2000-01-1694, 2000, https://doi.org/10.4271/2000-01-1694.Also In
References
- Wu, C.Y. 1995 Arbitrary Surface Flank Milling of Fan, Compressor and Impeller Blades Trans. ASME Journal of Engineering for Gas Turbines and Power 117 534 539
- Lauderbaugh, L. Ulsoy, A.G. 1989 Model Reference Adaptive Control in Milling Trans. ASME Journal of Engineering for Industry 111 13 21
- Budak, E. 2000 Improving Productivity and Part Quality in Milling of Titanium Based Impellers by Chatter Suppression and Force Control”, to appear in CIRP Annals
- Koenigsberger, F. Sabberwal, A.J.P. 1961 An Investigation into the Cutting Force Pulsations During Milling Operations International Journal of Machine Tool Design and Research 1 15 33
- Kline, W.A. DeVor, R.E. Shareef, I.A. 1982 The Prediction of Surface Accuracy in End Milling; Trans ASME Journal of Engineering for Industry 104 272 278
- Budak, E. Altintas, Y. 1995 Modeling and Avoidance of Static Deformations in Peripheral Milling of Plates International Journal of Machine Tools and Manufacture 34 3 459 476
- Armarego, E.J.A. Whitfield, R.C. 1985 Computer Based Modeling of Popular Machining Operations for Force and Power Predictions Annals of the CIRP 34 65 69
- Budak, E. Altintas, Y. Armarego, E.J.A. 1996 Prediction of Milling Force Coefficients From Orthogonal Cutting Data Trans. ASME Journal of Manufacturing Science and Engineering 118 216 224
- Altintas, Y. Lee, P., 1996 A General Mechanics and Dynamics Model for Helical End Mills”, Annals of the CIRP 45 59 64
- Budak, E. Altintas, Y. 1992 Flexible Milling Force Model for Improved Surface Error Predictions ASME 1992 European Joint Conference on Engineering Systems Design and Analysis Istanbul, Turkey ASME PD-Vol. 47 1