This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation of Engine Deck Face Distortion During Fixturing and Milling Operations
Technical Paper
2000-01-1287
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
The surface quality of deck face is a major factor affecting the gasket sealing of an engine block. The deck surface quality is mainly governed by external loads (clamping preload and machining force) during machining process. In machining process development, it is highly desirable to predict the quality of a machined surface. The thrust of this study, then, is an attempt to simulate deck face distortion during fixturing and milling operations using finite element analysis. The compliance of fixture components and dynamic response of the fixture-workpiece system are taken into account in this study. Finally, a production v-type engine block is demonstrated.
Recommended Content
Technical Paper | High-efficient Machining of Aerospace-alloys |
Technical Paper | Fatigue Life Prediction for Adaptable Insert Welds between Sheet Steel and Cast Magnesium Alloy |
Technical Paper | Portable 2 Axis Milling Machine for CFRP |
Authors
Citation
Liao, Y., "Simulation of Engine Deck Face Distortion During Fixturing and Milling Operations," SAE Technical Paper 2000-01-1287, 2000, https://doi.org/10.4271/2000-01-1287.Also In
References
- Lee, J.D. Haynes, L.S. 1987 “Finite Element Analysis of Flexible Fixturing Systems” ASME Journal of Engineering for Industry 109 134 139
- Menassa, R. J. DeVries, W. R. 1991 “Optimization Methods Applied to Selecting Support Positions in Fixture Design” ASME Journal of Engineering for Industry 113 412 417
- Subramani, G. Kapoor, S.G. DeVor, R.E. 1991 “A Model for the Prediction of Bore Cylindricity During Machining” ASME Journal of Engineering for Industry 115 15 22
- Jakade, N.N. Chow, J.G. 1993 “Finite Element Analysis of Engine Bore Distortions During Boring Operation” ASME Journal of Engineering for Industry 115 379 384
- Trappey, A.J.C. Su, C.S. Hou, J.L. 1995 “Computer-Aided Fixture Analysis Using Finite Element Analysis and Mathematical Optimization Modeling” ASME Proceedings of International Mechanical Engineering Congress and Exposition 2-1 3-1 777 787
- Chandra, P. Athavale, S.M. DeVor, R.E. Kapoor, S.G. 1996 “Effect of Loads on the Surface Flatness during Fixturing of Flexible Workpiece” Proceedings of the 2 nd S. M. Wu Symposium on Manufacturing Science May 14 University of Michigan Ann Arbor 146 152
- Gu, F. Melkote, N. Kapoor, S.G. DeVor, R.E. 1997 “A Model for Prediction of Surface Flatness in Face Milling” ASME Journal of Manufacturing Science and Engineering 119 476 484
- Chandra, P. Athavale, S.M. Kapoor, S.G. DeVor, R.E. 1997 “Finite Element Based Fixture Analysis Model for Surface Error Predictions due to Clamping and Machining Forces” ASME Proceedings of International Mechanical Engineering Congress and Exposition 6-2 245 252
- Bella, D. Reymond, M. 1997 MSC/ NASTRAN DMAP Module Dictionary The MacNeal-Schwendler Corp. Los Angeles, CA
- Faupel, J.H. Fisher, F.E. 1981 Engineering Design - A Synthesis of Stress Analysis and Materials Engineering 2nd John Wiley and Sons, Inc. New York 811 816
- Shawki, G.S.A. Abdel-Aal, M.M. 1966 “Rigidity Considerations in Fixture Design - Rigidity of Clamping Elements” International Journal of Machine Tool Design and Research 6 207 220
- Gu, F. Kapoor, S.G. DeVor, R.E. Bandyopadnyay, P. 1997 “An Enhanced Cutting Force Model for Face Milling with Variable Cutting Feed Motion and Complex Workpiece Geometry” ASME Journal of Manufacturing Science and Engineering 119 467 475
- Harris C.M. 1996 Shock and Vibration Handbook 4th McGraw-Hill Co. New York 43.13