This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Determination of Thermal Properties of Engine Combustion Chamber Deposits
Technical Paper
2000-01-1215
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
Thermal conductivity and thermal diffusivity of combustion chamber deposits in an s. i. engine and a diesel engine were determined by measuring thickness, response time to a radiation pulse, time-varying deposit surface temperature and deposit-wall interface temperature. The results show that, for the s. i. engine deposits formed with a stoichiometric mixture of unleaded gasoline, the thermal conductivity is hardly influenced by engine load, speed and equivalence ratio, and that thermal diffusivity depends on equivalence ratio, but hardly depends on engine load and speed. The test result with unleaded gasoline containing lubricating oil indicates that the thermal properties are sensitive to the lubricating oil content and depend considerably on engine load. The thermal properties of diesel deposit are the first data that have been presented. The result show that the thermal conductivity depends on engine load and is larger in general than that of s. i. engine and that the thermal diffusivity has no meaningful dependence on engine load and is larger than that of s. i. engine operated with stoichiometric mixture of unleaded gasoline.
Recommended Content
Topic
Citation
Nishiwaki, K. and Hafnan, M., "The Determination of Thermal Properties of Engine Combustion Chamber Deposits," SAE Technical Paper 2000-01-1215, 2000, https://doi.org/10.4271/2000-01-1215.Also In
References
- Ikegami, M. Hida, M. Nishiwaki, K “Computational Fluid-Dynamic Predictions of Heat Transfer in the Combustion-Chamber Walls of Diesel Engines” Trans. JSME 57 534 1991 744 749
- Woschni, G Huber, K. “The Influence of Soot Deposits on Combustion Chamber Walls on Heat Losses in Diesel Engines” SAE Paper No. 910297 1991
- Anderson, C. L. Uyehara, O. A. Myers, P. S. “An In-Situ Determination of The Thermal Properties of Combustion-Chamber Deposits” SAE Paper No. 820071 1982
- Overbye, V. D. Bennethum, J. E. Uyehara, O. A. Myers, P. S. “Unsteady Heat Transfer in Engines” SAE Trans. 69 1961 461 494
- Hayes, T. K. White, R. A. Peters, J. E. “The In-Situ Measurement of the Thermal Diffusivity of Combustion Chamber Deposits in Spark Ignition Engines,” SAE Paper No. 920513 1992
- Wood, B. S. Anderson C. L. “Gasification of Porous Combustion Chamber Deposits in a Spark Ignition Engine” SAE Paper No. 930773 1993
- Nishiwaki, K. “Unsteady Thermal Behavior of Engine Combustion Chamber Deposits,” SAE Trans. 97 1988 Paper No. 881225
- Eckert, E. R. G. Drake, R. M. Analysis of Heat and Mass Transfer McGraw-Hill 1972 185 186
- Cheng, S. S. Kim, C. “Effect of Engine Operating Parameters on Engine Combustion Chamber Deposits” SAE Paper No. 902108 1990
- Anderson, C. L. Prakash, C. “The Effects of Variable Conductivity On Unsteady Heat Transfer in Deposits” SAE Paper No. 850048 1985
- Bethel, S. Anderson, C. L. “An Infrared Technique for Measuring Cycle-Resolved Transient Combustion-Chamber Surface Temperatures in a Fired Engine” SAE Paper No. 860240 1986
- LaVigne, P. A. Anderson C. L. Prakash, C. “Unsteady Heat Transfer and Fluid Flow in Porous Combustion Chamber Deposits” SAE Paper No. 860241 1986