This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Cost Effective Manufacture of Synchronizer Hubs and Rings for Manual Transmissions by Sinterhardening
Technical Paper
2000-01-0998
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
Sinterhardening has proven to be an efficient and cost saving way to manufacture high strength components f.e. for gear boxes in an environmetally friendly manner.
Material investigations showed that diffusion alloyed materials generally proved to be less sensitive to the hardening conditions and geometry than prealloyed materials either regarding hardness or dimensional change.
As sizing of components is difficult to impossible in the sinterhardened condition, shrinkage or swelling has a decisive effect on the final dimensional stability.
Compared to casehardening sinterhardening requires a significantly higher alloy content of f.e. Ni or Mo. Despite this particular cost disadvantage, the overall process provides lower costs at similiar strength levels and better tolerances.
Recommended Content
| Technical Paper | INDUCTION-HARDENED GEARS |
| Technical Paper | Development of Pitting Resistant Steel for Gears |
| Technical Paper | Application of Sinter-Hardenable Materials for Advanced Automotive Applications such as Gears, Cams, and Sprockets |
Citation
Ratzi, R. and Orth, P., "Cost Effective Manufacture of Synchronizer Hubs and Rings for Manual Transmissions by Sinterhardening," SAE Technical Paper 2000-01-0998, 2000, https://doi.org/10.4271/2000-01-0998.Also In
References
- Lindner K.H. 53 Hagen 1994
- Technische Information 03/96 Mannesmann Demag
- Chagnon F. et al. “Effect of Tempering Temperature on Sintered Properties of Sinterhardened PM Steels” Proc. of EURO PM97 Munich 1997 273 EPMA Shrewsbury 1997
- Lang K.H. et al. “Cyclic properties of Differently Heat Treated PM-Steels” Proc. of PM World Congress 1998 EPMA Shrewsbury 1997
- Salak A. Ferrous Powder Metallurgy 244 Cambridge Intern. Science Publishing 1955
- 1998
- Lindner K.H. 25 227 234 1994
- 'Esperance G.L. et al. “Evaluation of the Effect of Tempering on Microstructure and Properties of three Widely used Sinter Hardening Alloys” Proc. of PM'TEC '95 MPIF Princeton
- Baum U. et al 53 Hagen 1994