This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Desiccant on the Stability of Automotive Air Conditioning Systems
Technical Paper
2000-01-0983
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
Desiccant materials are commonly used in the automotive industry to reduce the level of moisture in vehicle air conditioning systems. The primary purpose for removing moisture from these systems is to avoid corrosion of metals, compatibility problems with polymeric materials, and possible freeze-up associated with free water. In nonpolar R-12/mineral oil systems with low solubility for water, moisture levels are usually controlled to 25 ppm or less. However, R-134a and PAG are highly polar and have good solubility for moisture, thus presenting reduced risk of free water in the air-conditioning systems. This paper addresses the questions of whether desiccants are required in air conditioning systems using R- 134a/PAG, and if required, what is the optimum quantity of desiccant for system stability and long-term system reliability
Tests were conducted in the laboratory (accelerated sealed tube aging according to ASHRAE standard 97- 1989) as well as in the field (vehicle fleet tests). The experimental results showed that the moisture level in the aged or retrieved PAG is affected by the amount of desiccant present in the system. However, the higher moisture levels recorded with reduced amount of desiccant or with no desiccant did not necessarily lead to high total acid numbers indicative of PAG decomposition or high fluoride ion concentrations indicative of R-134a decomposition. The effects of high moisture levels on various material components of the automotive air-conditioning system are also discussed.
Recommended Content
Authors
Topic
Citation
Rohatgi, N., Henderson, D., Amin, J., Xu, J. et al., "Effect of Desiccant on the Stability of Automotive Air Conditioning Systems," SAE Technical Paper 2000-01-0983, 2000, https://doi.org/10.4271/2000-01-0983.Also In
SAE 2000 Transactions Journal of Passenger Cars - Mechanical Systems
Number: V109-6; Published: 2001-09-15
Number: V109-6; Published: 2001-09-15
References
- “DuPont HFC-134a: Properties, Uses, Storage and Handling” bulletin P134a, DuPont Chemicals, Wilmington, DE, September 1997 4
- “Metal Corrosion Tests with HCFC-123 and Distilled Water” report NIST-10, E.I. DuPont de Nemours and Company, Inc., Wilmington, DE, undated.
- “Moisture Content and Emkarate ™ RL Ester Lubricants” bulletin 62-0170-160, ICI Americas Inc., Wilmington, DE, January 1994.
- McGovern, E.W. “Chemical Effects in Refrigerating Systems”, Refrigerating Engineering, 43 5 May 1942 276 279
- Sukhotin, A.M. “Corrosion of Metals in Freon 11 (CCl3F) at 50-250° C”, Consultants Bureau Division of Plenum Publishing Corporation, New York, NY 1974 369 372 translated from Zashchita Metallov, 9 4 July-August 1973, p. 402-406