Experimental Analysis of the Influence of Exhaust Manifold Junction Geometry on its Fluid-Dynamic Behavior

Authors

• Francisco Payri - Universidad Politécnica de Valencia, Spain
• José Galindo - Universidad Politécnica de Valencia, Spain
• Vicente Bermudez - Universidad Politécnica de Valencia, Spain
• Philippe Gutierrez - Renault
• Hervé Mathieu - Renault

Topic

• Single cylinder engines
• Exhaust manifolds

Citation

Also In

References

1. Tabaczynski, R. 1982 Effect of the inlet and exhaust system design on engine performance SAE paper 821577
2. Winterbone, D.E. Nichols, J.R. Alexander, G.I. 1985 Efficiency of the manifolds of turbocharged engines Proc. of the Institution of Mechanical Engineers 199 2 137 149
3. Benajes, J. Reyes, E. Bermúdez, V. Serrano, J.R. 1998 Pre-design criteria for exhaust manifolds in I. C. automotive engines SAE paper 980783
4. Decollogny, G. Meier, E. 1962 Ingénieurs de l'automobile 8 9-62 425 440
5. Broom, D.E. 1969 Induction ram. Automobile Engineer April May June 1 17
6. Benson, R.S. 1982 The thermodynamics and gas dynamics of internal combustion engines 1 Oxford Clarendon Press
7. Payri, F. Desantes, J.M. Corberán, J.M 1986 Computer aided design of I. C. engine intake and exhaust systems 15th Int. Symp. Autom. Techn. & Automat. ISATA Switzerland
8. Benajes, J. Torregrosa, A.J. Brunel, J.P. 1992 The effect of simple muffler geometries on the performance of a single cylinder engine SIA Congress Valencia, Spain
9. Benajes, J. Torregrosa, A.J. Reyes, M. Brunel, J.P. 1993 The effect of exhaust pipe geometry on the engine performance SIA Congress Lyon, France
10. Payri, F. Benajes, J.V. Peidró, J. 1990 Critères de conception des collecteurs des moteurs diesel Congres International “Moteurs Diesel: perspectives 1990-2000” Ecole Centrale de Lyon, France 13-14 Juin 1990
11. Benajes, J. Reyes, E. Galindo, J. Peidró, J. 1997 Predesign model for intake manifolds in internal combustion engines SAE paper 970055
12. Payri, F. Benajes, J. Galindo, J. 1995 One dimensional fluidynamic model for catalytic converters in automotive engines SAE paper 950785
13. Azuma, T. Yura, T. Tokunaga, Y. 1983 Some aspects of constant pressure turbocharged marine engines of medium and low speed Journal of Engineering for Power 105 697 711
14. Benson, R.S. Alexander, G.I 1977 The application of pulse converters to automotive four stroke cycle engines. Part I: Gas dynamic application of the pulse converters to automotive four-stroke cycle engines. Part II: Optimization of pulse-converter turbo-charger combination SAE paper 770034
15. Chan, C.L. Winterbone, D.E. Alexander, G.I. 1986 A detailed study of compact exhaust manifolds applied to automotive diesel engines Proc. of the Institution of Mechanical Engineers , Part C 113 269 281
16. Janota, M.S. Watson, N. 1973 Pulse converters - a method of improving the performance of the turbocharged diesel engine Proc. of the Institution of Mechanical Engineers 1 51 635 647
17. Meier, E. 1968 L'emploi de convertisseurs d'impulsions sur les Diesels à quatre temps avec groupe de suralimentation mû par les gaz d'échappement Revue Brown Boveri 55 8 420 428
18. Zehnder, G. 1968 Convertisseurs d'impulsions por Diesels à deux temps Revue Brown Boveri 55 8 414 419
19. Seifert, H. Schindler, P. 1987 New findings corcerning the gas dynamic effects of manifold junctions with injector effect (pulse-converter) Congress on Modeling in ICE Valencia, Spain May 1987
20. Casalini, F. Vacca, G. 1987 Effects of T-junctions on the global performances of reciprocating internal combustion engines Congress on Modeling in ICE Valencia, Spain May 1987
21. Bulaty, T. Widenhorn, M. 1993 Unsteady flow calculation of sophisticated exhaust systems using a multibranch junction model Journal of Engineering for Gas Turbine and Power 115 4 756 760
22. Benson, R.S. Woollatt, D. Woods, W.A. 1963-64 Unsteady flow in simple branch systems Proc. of the Institution of Mechanical Engineers 178 3iii 24 49
23. Bingham, J.F. Blair, G.P. 1985 An improved branched pipe model for multicylinder automotive engine calculations Proc. of the Institution of Mechanical Engineers , Part D 199 1 65 77
24. Linnhoff, H.J. Peters, A. Schindler, P. 1987 Numerical simulation of injector-flow at the by-pass of a turbine used with a turbocharged IDI engine MTZ 48 10 395 402
25. Dimitriadis, C. Leschziner, M.A. Winterbone, D.E. Alexander, G.I. Sierens, R. 1985 Computation of three-dimensional flow in manifold-type junctions ASME International symposium on flow and flow related phenomena in reciprocating combustion engines III 28 57 62
26. Leschziner, M.A. Dimitriadis, K.P. 1987 Numerical simulation of three-dimensional turbulent flow in exhaust manifold junctions IMechE paper C09/87 183 190
27. Leschziner, M.A. Dimitriadis, K.P. 1989 Computation of the three-dimensional turbulent flow in non-orthogonal junctions by a branch-coupling method Computers & Fluids 17 2 371 396
28. Fu, H. Tindal, M.J. Watkins, A.P. Yiannekis, M. 1992 Computation of the three-dimensional turbulent flow in a pipe junction with reference to engine inlet manifolds Proc. of the Institution of Mechanical Engineers , Part C 206 285
29. Gori, A. Sassi, L. Bidini, G. 1995 Analisi 3D del flusso in giunzioni di condotti di scarico ATA 48 10 508 515
30. Flamang, P. Sierens, R. 1991 Study of the non-steady flow in a multipulse converter Energy-Sources Technology Conference and Exhibition New Orleans
31. Reyes, M. Espinoza, H. Reyes, E. Galindo, J. 1997 Una condición de contorno para el modelado del efecto eyector en uniones de conductos de escape de motores de combustión interna Congreso Iberoamericano de Ingeniería Mecánica La Habana
32. Payri, F. Reyes, E. Galindo, J. 1999 Modelling of the fluid-dynamic effects In branched exhaust junctions of I.C.E Spring Technical Conference of the ICE Division of the ASME
33. Thielemann, J. 1990 Calculation of gasdynamic and thermodynamics processes within the multi-entry pulse converter MTZ 51 168 171

Cited By