This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation Tool for Transmission and Driveline Systems Design
Technical Paper
2000-01-0832
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
Recommended Content
Authors
Citation
Garcia, O. and Kargar, K., "Simulation Tool for Transmission and Driveline Systems Design," SAE Technical Paper 2000-01-0832, 2000, https://doi.org/10.4271/2000-01-0832.Also In
References
- AMPHLETT S.A. MARCH J.P. “Studying low frequency vehicle phenomena using advanced modelling techniques - Part 1: construction of a drive line model” Proceeding of the 1995 Noise and Vibration Conference, SAE Paper 951270 1995 287 293
- BARDZIMASHVIHI N.G. YASHVILI S.G. “Study of multidisc oil friction clutch engagement” Trenic i Iznos 8 2 1987 265 273 KOTWICKI AJ. «Dynamic models for torque converter equiped vehicles» SAE paper n° 820393 1982
- BEGLEY C.J. VIRGIN L.N. “A detailed study of the low frequency periodic behaviour of a dry friction oscillator” Transactions ASME, Journal of Dynamic Systems, Measurement and Control 119 Septembre 1997 491 497
- BERGER E.J. “An investigation of friction induced vibration in automatic, transmission wet clutches, grooved wet clutches” Purdue University Decembre 1996
- BLIMAN P.A. SORINE M. “Easy-to-use realistic dry friction models for automatic control” Proceeding of the 3 rd European Control Conference Rome, Italie Septembre 1995 1 7
- CHIKATANI, SUEHIRO «Reduction of idling rattle noise in trucks SAE Paper 911044 1991
- CHOU C.C. LUKOWSKI S.A. “Studies on the frictional coupling mechanism in multidisk stepless transmissions” ASME Paper 75-DE-35 1975 1 12
- DAHL P.R. “Solid friction damping of mechanical vibrations” AIAA Journal 14 12 Décembre 1976 1675 1682
- DUPONT P.E. DUNLOP E.P. “Friction modeling and PD compensation at very low velocities” Transactions ASME, Journal of Dynamic Systems, Measurement and Control 117 Mars 1995 8 14
- FOLCHERT U. MENNE A. WALLER H. «Experimental identification of dynamic characteristics of hydrodynamic torque converters & couplings» ASME paper 94GT360 1994
- GEMEINHOLZER G. GATINEAU F. “Embrayages multidisques à refroidissement par huile” Document d'Information Constructeur HOERBIGER
- HAESSIG D.A. FRIEDLAND B. “On the modeling and simulation of friction” Transactions ASME, Journal of Dynamics Systems, Measurement and Control 113 Septembre 1991 354 362
- HESS D.P. SOOM A. “Friction at a lubricated line contact operating at oscillating sliding velocities” Transactions ASME, Journal of Tribology 112 Janvier 1990 147 152 HOSHINO «Analyse on synchronisation mecahnism of transmission» SAE 1999-01-0734
- JACOBSON B. “Gear shifting with retained power transfert” Machine and Vehicle Design Dept., Chalmers University of Technology GOTEBORG, Suède 1993
- KARNOPP D. “Computer simulation of stick slip friction in mechanical dynamic systems” Transactions ASME, Journal of Dynamic Systems, Measurement and Control 107 Mars 1985 100 103
- LASCHET «Simulation of Vibration in Powertrains to minimize Gear Rattling» Mech E C382/089 1989
- MIURA T. SEKINE N. AZEGAMI T. MURAKAMI Y. “Study on the dynamic properties of a paper-based wet clutch” SAE Paper n° 981102 1998
- PAYNTER HM LONGORIA RG «Efficient computer models for automotive fluid couplings and torque converters» ASME Fluids Engineering Division Summer Meeting 1998
- RABEIH E.M.A. CROLLA D.A. “Intelligent control of clutch judder and shunt phenomena in vehicle drivelines” Internal Journal of Vehicle Design 17 3 1996 318 332
- ROULET «Modélisation de l'évolution de la dissipation de puissance et du comportement thermique d'une boîte de vitesses manuelle» Thèse de doctorat de l'université de Paris VI 1995
- SAWANOBORI T. SUEHIRO K. “An analysis of Clutch judder” Proceeding of the 1995 Noise and Vibration Conference, SAE paper 951318 1995 691 696
- SEPEHRI N. SASSANI F. LAWRENCE P.D. GHASEMPOOR A. “Simulation and experimental studies of gear backlash and slick-slip friction in hydraulic excavator swing motion” Transactions ASME, Journal of Dynamic Systems, Measurement and Control 118 Septembre 1996 463 466
- SOUTHWARD S.C. RADCLIFFE C.J. MAC CLUER C.R. “Robust non linear stick-slip friction compensation” Transactions ASME, Journal of Dynamic Systems, Measurement and Control 113 Décembre 1991 639 645
- SZADKOWSKI A. PRANGE E. NAGAMATHAN N.G. “Hysteresis effects on driveline torsional vibrations” Proceeding of the 1995 Noise and Vibration Conference, SAE paper n° 951293 1995 481 493
- TAN X ROGERS R.J. “Simulation of friction in multi degree of freedom vibration systems” Transactions ASME, Journal of Dynamic Systems, Measurement and Control 120 Mars 1998 144 146
- YAMADA N. ANDO K. “An analysis of clutch self-excited vibration in automotive drive line” Proceeding of the 1995 Noise and Vibration Conference SAE paper 951319 1995 697 704
- WU H. “An analysis of the engagement of wet clutch plates” Wear 24 1973 23 33
- YANG Y. LAM R.C. FUGII T. “Prediction of torque response during the engagement of wet friction clutch” SAE Paper n° 981097 1998
- YOUNES Y.K. “A design schema for multidisk Beier traction variators” Transactions ASME, Journal of Mechanical Design 114 Mars 1992 17 22