This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimizing Common Rail-Injection by Optical Diagnostics in a Transparent Production Type Diesel Engine
Technical Paper
1999-01-3646
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper describes results from investigating Common Rail (CR) injection in a dedicated optical engine with optimum access to the whole cross section of the engine cylinder through piston. This engine maintains all production-type details of the combustion chamber geometry being crucial to the flow fields required for optimum engine performance. This optical engine is used along with 2D optical diagnostics for temperature, soot and OH as well as spray shadowgraphy to analyze all phases of injection and combustion under virtually real engine conditions. By using special prototype CR injectors, the effects of engine design and operation strategies on ignition, combustion and pollutant formation are studied and controlling parameters are isolated. Special emphasis is devoted to the effects of injector stability, spray symmetry, nozzle geometry, injection rate, pilot injection and swirl effects.
The experimental approaches and diagnostic tools are presented as well as the results obtained on injector design effects. The results are discussed in detail and conclusions are drawn on how nozzle design and operating features affect injection characteristics and hence ignition, combustion and emission properties.
Recommended Content
Authors
Topic
Citation
Koyanagi, K., Öing, H., Renner, G., and Maly, R., "Optimizing Common Rail-Injection by Optical Diagnostics in a Transparent Production Type Diesel Engine," SAE Technical Paper 1999-01-3646, 1999, https://doi.org/10.4271/1999-01-3646.Also In
References
- Renner, G. Maly, R. R. Moderne Verbrennungsdiagnostik für die dieselmotorische Verbrennung 1998 Dieselmotorentechnik 98 Essers, U. 553 Expert Verlag Renningen-Malsmheim 174 188 1998
- Renner, G. Koyanagi, K. Maly, R. R. Effect of Common Rail Injector Design on the Emission Characteristics of Passenger Car D.I. Diesel Engines Proc. 4th Symp. on COMODIA 94 JSME 477 482 1994
- Hoffman, K-H. Hummel, K. Maderstein, T. Peters, A. Das Common Rail Einspritzsystem - Ein neues Kapitel der Dieseleinspritz-Technologie MTZ Motortechnische Zeitschrift 58 10 576 1997
- Wirth, R. Entwicklung von kombinativen optischen Meßtechniken zur Untersuchung der Strahlausbreitung, Gemischbildung und Zündung unter dieselmotorischen Temperaturen und Drücken Universität Stuttgart 1997
- Maly, R. R. Progress in Combustion Research IMechE Autumn Meeting October 8-9 London 1998
- Herweg, R. König, G. Maly, R. R. Zahn M. Laserdiagnostiken zur Lösung motorischer Problemstellungen March 28-29 1995 Berichte zur Energie- und Verfahrenstechnik: Motorische Verbrennung - aktuelle Probleme und moderne Meßverfahren Leipertz, A. ESYTEC Erlangen 54 63 1995
- Wagner, E Öing, H. Renner, G. Ellwanger, S. Maly, R.R. Koyanagi, K. Optimierungspotential der Common Rail Einspritzung für emissions- und verbrauchsarme Dieselmotoren Proc. Int. Congress on Zero or Near Zero Emissions AVL Graz 1999
- Stapf, P. Dwyer, H.A. Maly, R.R. A Group Combustion Model for Treating Reactive Sprays in I.C. Engines 27 th Symposium on Combustion The Combustion Institute 1998
- Arai, M. Tabata, M Hiroyasu, H. Shimizu, M Disintegrating Process and Spray Characterization of Fuel Jet Injected by a Diesel Nozzle SAE Paper 840275 1984
- Öing, H. Koyanagi, K. Maly, R. R. Renner, G. Stotz, M. Einfluß von Einspritzverlauf und Düsenauslegung auf das Brennverhalten bei Pkw Common Rail Einspritzung IV Tagung Motorische Verbrennung Haus der Technik Essen 16.-17 03 1999
- Bertsch, D. Experimentelle Untersuchung zum Einfluß gemischbildungseitiger Maßnahmen auf den Zündprozeß, Verbrennung und Schadstoffbildung an einem optisch zugänglichen DE-Dieselmotor Universität Karlsruhe 1999
- Drewes, V. Zweidimensionale Konzentrations- und Temperaturbestimmung in einem volltransparenten Forschungsmotor mit quadratischem Brennkammerquerschnitt University of Heidelberg 1995
- Dec J.E. Espey, C Ignition and Early Soot Formation in a DI Diesel Engine Using Multiple 2-D Imaging Diagnostics SAE Transactions 104 853 875 Paper 950456 1995
- Dec J.E. Coy, E.B. OH Radical Imaging in a DI Diesel Engine and the Structure of the Early Diffusion Flame SAE Transactions 105 1127 1148 Paper 960831 1996
- Dec J.E. Espey, C Chemiluminescence Imaging of Autoignition in a DI Diesel Engine SAE Paper 982685 1998
- Edwards, C.F. Siebers, D.L. Hoskin, D.H. A Study of the Autoignition Process of a Diesel Spray via High Speed Visualization SAE Paper 920108 1982
- Fujimoto, H. Iida, H. Aoyama, T. Senda, J. Analysis of Combustion Characteristics in a Diesel Flame by Means of Chemiluminescence Proc. 3 rd Symp. on COMODIA 94 JSME 505 510 1994
- Baritaud, T.A. Heinze, T.A. Le Coz, J.F. Spray and Self-Ignition Visualization in a DI Diesel Engine SAE Transactions 103 1129 1144 SAE Paper 940681 1994
- Kosaka, H. Nishigaki, T. Kamimoto, T. Sano, T. Matsutami, A. Harada, S. Simultaneous 2-D Imaging of OH Radicals and Soot in a Diesel Flame by Laser Sheet Techniques SAE Paper 960834 1996
- Yoshihara, Y. Nishiwaki, K. Kisei, A. Modeling of Cracking and Autoignition Process in Diesel Combustion Proc. 4 th Symp. on COMODIA 98 JSME 123 128 1998
- Gärtner, U. Oberacker, H. König, G. Der Einsatz moderner Verbrennungsfilmtechnik bei der Verbrennungsabstimmung schwerer Nfz-Dieselmotoren IV Tagung Motorische Verbrennung Haus der Technik Essen 16.-17 03 1999
- Anisits, F. Borgmann, K Kratochwill, H. Steinparzer, F. Der neue BMW Sechszylinder-Dieselmotor MTZ Motortechnische Zeitschrift 59 11 698 709
- Maly, R. R. Stapf, P. König, G. Neue Ansätze zur Modellierung der Rußbildung 1998 Dieselmotorentechnik 98 Essers, U. 553 Expert Verlag Renningen-Malsmheim 188 203 1998
- Maly, R. R. Stapf, P. König, G. Progress in Soot Modeling Comodia98 Kyoto, Japan July 20-23 1998
- Klingmann, R. Fick Brüggemann, H. Die neuen Common Rail Dieselmotoren mit Direkteinspritzung in der modellgepflegten E-Klasse, Teil 1, Motorkon- struktion und mechanischer Aufbau MTZ Motortechnische Zeitschrift 60 7 426 438 1999