This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Roughness Texturing and its Influences on the Tribological Behaviour in Forming Processes
Technical Paper
1999-01-3071
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Sheet metal forming processes are increasingly focused on tribological parameters, and the sheet metal surface topography is nowadays a characteristic that show great potential for the process optimisation. In this paper, three different surface textures of an aluminium alloy AA 6016-T4 are characterised by 2D and 3D surface analysis methods. The effects of the surface topography on the friction behaviour and the formability were investigated by means a twist-compression test and a deep-drawing test, respectively.
Recommended Content
Authors
Citation
Batalha, G., Engel, U., and Neudecker, T., "Roughness Texturing and its Influences on the Tribological Behaviour in Forming Processes," SAE Technical Paper 1999-01-3071, 1999, https://doi.org/10.4271/1999-01-3071.Also In
References
- SCHMOEKEL; D. NÜRNBERGER; G. NETSCH, Th. Blech Rohre Profile 38 10 1991
- PRIER, M. STAEVES, J. Bedeutung der Oberflächenfeingestalt in der Blechunformung Meisenbach Verlag Bamberg 1997
- DINKEL; F HOFFMANN, H. KOPIETZ, J. Blech Rohre Profile Juli 7 8 1997 36 40
- BALBACH, R. Stahl und Eisen 109 8 1989 427 434
- EMMENS, W. C. SCHOEPEN, F. Some frictional aspects of aluminium in sheet metal forming Proc. 19 th IDDRG Eger 10-14 Juli 1996 487 96
- EMMENS; W. C. Some Aspects of Aluminium in Deep Drawing Proc. 1 st . International Congress on Tribology of Manufacturing Process (ICTMP) Gifu, Japan October 1997
- STEINHOF, K. RASP, W. PAWELSKI, O. Development of Deterministic-Stochastic Structures to Improve the Tribological Conditions of Sheet Forming Processes J. Mater. Proc. Tec. 60 1996 355 61
- DEUTSCHER, O. Stahl und Eisen 115 7 1995 39 45
- WEBER; F. Stahl und Eisen 110 3 1990 45 51
- SOBIS, T. Beitrag zur Mechanik der Mischreibung in der Wirkfuge umformtechnischer Prozesse Berlin, Springer 1996
- PFESTORF; M. Funktionale 3D-Oberflächenkengrößen in der Umformtechnik Meisenbach Verlag Bamberg 1997
- GEIGER, M. PFESTORF, M. ENGEL, U. Tagungsband IX Int. Oberflächen kolloquium 29-31 1 96 Chemnitz 159 70
- GEIGER, M. PFESTORF, M. ENGEL, U. Stahl und Eisen 115 7 1995 47 53
- PFESTORF, M. ENGEL, U. GEIGER, M. 3D-Surface Parameters and their Application on Deterministic Textured Sheet Metalls Proc. of the 7 th . Int. Conf. on Metrology and Properties of Engineering Surfaces Göteborg 02-04 April 1997
- SORG; H. Praxis der Rauheitsmessung und Oberflächenbeurteilung Carl Hanser München 1995
- Kenngrößen R k , R pk , M r1 , M r2 zur Beschreibung des Materialanteils im Rauheitsprofil November 1985 Berlin Beuth
- KJELSDEN, P. Tribologie und Schmierungstechnik 43 6 1996 333 6
- STOUT, K. J. et al. The Development of Methods for the Characterisation of Roughness in Three Dimensions Report EUR 15178 EN
- De CHIFFRE, L. CHRISTIANSEN, S. SKADE, S. Advantages and Industrial Application of Three-Dimensional Roughness Analysis CIRP Annals 43 1 1994 473 8
- LONARDO; P: M: TRUMPOLD, H. De CHIFFRE; L. Progress in 3D Surface Microtopography characterisation CIRP Annals 45 2 1995 589 98
- WAGNER, S. Three-Dimensional Sheet Surface Analysis Production Engineering 1 1993 1 53 6
- SCHMOEKEL; D. STAEVES, J. Function-Orientated 3D Filtering for Tribological Assessment of Sheet Metal Surfaces in Deep Drawing Proc. of 7 th International Conference on Metrology and Properties of Engineering Surfaces Goeteborg 02-04 April 1997
- STAEVES, J. New 3D Roughness Parameters and their Relationship to the Tribological Behaviour of Sibetex Sheet Proc. SIBETEX 3 24 10 1996 OCAS Zelzate Belgien
- STAEVES, J. SCHMOEKEL; D. Topography of Sheet Metal and its Relationship to the Tribological Behaviour during the Forming Process Proc. 1 st ICTMP 1997 Gifu, Japan 340 3
- BATALHA, G. F. NEUDECKER, T. ENGEL, U. GEIGER, M. Estimation of the Contact Conditions and their Influences on Interface Friction in Forming Processes Proc. 13 CBECIMAT / VI SEMEL December 6-9 1998 Curitiba, Brazil 1656 70