Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Predicting Mechanical Properties of Friction Welded AISI 1020/AISI 1018 Steel and AISI 431/AISI 1018 Steel Joints

Journal Article
05-16-02-0013
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-16-02-0013
Published January 05, 2023 by SAE International in United States
Predicting Mechanical Properties of Friction Welded AISI 1020/AISI 1018 Steel and AISI 431/AISI 1018 Steel Joints
Sector:
Citation: Thirumalaikkannan, D., Paramasivam, S., Visvalingam, B., Sonar, T. et al., "Predicting Mechanical Properties of Friction Welded AISI 1020/AISI 1018 Steel and AISI 431/AISI 1018 Steel Joints," SAE Int. J. Mater. Manf. 16(2):157-174, 2023, https://doi.org/10.4271/05-16-02-0013.
Language: English

References

  1. Taban , E. , Gould , J.E. , and Lippold , J.C. Characterization of 6061-T6 Aluminum Alloy to AISI 1018 Steel Interfaces during Joining and Thermo-Mechanical Conditioning Mater. Sci. Eng. A 527 7-8 2010 1704 1708
  2. Kumar , A. , Pankaj , P. , Biswas , P. , and Rao , A.G. Finite Element Analysis and Experimental Investigation on Effect of Process Parameters in Plasma-Assisted Friction Stir Welding of Low Carbon Steel Trans. Indian Inst. Met. 1-21 2022
  3. Dewangan , S. , Mainwal , N. , Khandelwal , M. , and Jadhav , P.S. Performance Analysis of Heat Treated AISI 1020 Steel Samples on the Basis of Various Destructive Mechanical Testing and Microstructural Behaviour Australian Journal of Mechanical Engineering 20 1 2022 74 87
  4. Erdoğan , A. Laser Remelting Power Effect on Microstructure, Hardness and Wear Behavior of AISI 1020 Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2022
  5. Rajasekhar , A. , Reddy , G.M. , Mohandas , T. , and Murti , V.S.R. Influence of Post-Weld Heat Treatments on Microstructure and Mechanical Properties of AISI 431 Martensitic Stainless Steel Friction Welds Mater. Sci. Technol. 24 2 2008 201 212
  6. Kumar , A.S. , Khadeer , S.A. , Rajinikanth , V. , Pahari , S. et al. Evaluation of Bond Interface Characteristics of Rotary Friction Welded Carbon Steel to Low Alloy Steel Pipe Joints Mater. Sci. Eng. A 824 2021 141844
  7. Zhou , W. , Ai , S. , Chen , M. , Zhang , R. et al. Preparation and Thermodynamic Analysis of the Porous ZrO 2 /(ZrO 2 + Ni) Functionally Graded Bolted Joint Comp. Part B: Eng. 82 2015 13 22
  8. Zhou , W. , Zhang , R. , Ai , S. , He , R. et al. Load Distribution in Threads of Porous Metal–Ceramic Functionally Graded Composite Joints Subjected to Thermomechanical Loading Comp. Struct. 134 2015 680 688
  9. Li , W. , Vairis , A. , Preuss , M. , and Ma , T. Linear and Rotary Friction Welding Review Inter. Mater. Rev. 61 2 2016 71 100
  10. Uday , M.B. , Ahmad Fauzi , M.N. , Zuhailawati , H. , and Ismail , A.B. Advances in Friction Welding Process: A Review Sci. Technol. Weld. Join. 15 7 2010 534 558
  11. Vairis , A. , Papazafeiropoulos , G. , and Tsainis , A.M. A Comparison between Friction Stir Welding, Linear Friction Welding and Rotary Friction Welding Adv. Manuf. 4 4 2016 296 304
  12. Alves , E.P. , Piorino Neto , F. , and An , C.Y. Welding of AA1050 Aluminum with AISI 304 Stainless Steel by Rotary Friction Welding Process J. Aero. Technol. Manag. 2 2010 301 306
  13. Zhang , D. , Qin , G. , Geng , P. , and Ma , H. Study of Plastic Flow on Intermetallic Compounds Formation in Friction Welding of Aluminum Alloy to Stainless Steel J. Manuf. Proc. 64 2021 20 29
  14. Mullo , J.L. , Ramos-Grez , J.A. , and Barrionuevo , G.O. Effect of Laser Heat Treatment on the Mechanical Performance and Microstructural Evolution of AISI 1045 Steel-2017-T4 Aluminum Alloy Joints during Rotary Friction Welding J. Mater. Eng. Perf. 30 4 2021 2617 2631
  15. Arivazhagan , N. , Singh , S. , Prakash , S. , and Reddy , G.M. Investigation on AISI 304 Austenitic Stainless Steel to AISI 4140 Low Alloy Steel Dissimilar Joints by Gas Tungsten Arc, Electron Beam and Friction Welding Mater. Des. 32 5 2011 3036 3050
  16. Satyanarayana , V.V. , Reddy , G.M. , and Mohandas , T. Dissimilar Metal Friction Welding of Austenitic–Ferritic Stainless Steels J. Mater. Proc. Technol. 160 2 2005 128 137
  17. Domblesky , J. and Kraft , F.F. Metallographic Evaluation of Welded Forging Preforms J. Mater. Proc. Technol. 191 1-3 2007 82 86
  18. Ananthapadmanaban , D. , Rao , V.S. , Abraham , N. , and Rao , K.P. A Study of Mechanical Properties of Friction Welded Mild Steel to Stainless Steel Joints Mater. Des. 30 7 2009 2642 2646
  19. Switzner , N. , Yu , Z. , Eff , M. , Lienert , T. et al. Microstructure and Mechanical Property Variations within Inertia Friction-Welded Joints of Stainless Steel to Steel Inter. J. Adv. Manuf. Technol. 95 9 2018 4327 4340
  20. Mercan , S. , Aydin , S. , and Özdemir , N. Effect of Welding Parameters on the Fatigue Properties of Dissimilar AISI 2205–AISI 1020 Joined by Friction Welding Inter. J. Fatigue 81 2015 78 90
  21. Mercan , S. and Özdemir , N. Weldability Characteristics of Friction-Welded AISI 2205 to AISI 1020 Steels Weld World 61 4 2017 667 677
  22. Kırık , I. and Ozdemir , N. Weldability and Joining Characteristics of AISI 420/AISI 1020 Steels Using Friction Welding Inter. J. Mater. Res. 104 8 2013 769 775
  23. Winiczenko , R. Effect of Friction Welding Parameters on the Tensile Strength and Microstructural Properties of Dissimilar AISI 1020-ASTM A536 Joints Inter. J. Adv. Manuf. Technol. 84 5 2016 941 955
  24. Selvamani , S.T. and Palanikumar , K. Optimizing the Friction Welding Parameters to Attain Maximum Tensile Strength in AISI 1035 Grade Carbon Steel Rods Measurement 53 2014 10 21
  25. Al-Alimi , S. , Shamsudin , S. , Yusuf , N.K. , Lajis , M.A. et al. Recycling Aluminium AA6061 Chips with Reinforced Boron Carbide (B 4 C) and Zirconia (ZrO 2 ) Particles via Hot Extrusion Metals 12 8 2022 1329
  26. Sonar , T. , Balasubramanian , V. , Malarvizhi , S. , Venkateswaran , T. et al. Development of 3-Dimensional (3D) Response Surfaces to Maximize Yield Strength and Elongation of InterPulsed TIG Welded Thin High Temperature Alloy Sheets for Jet Engine Applications CIRP J Manuf Sci Technol 31 2020 628 642
  27. Rajarajan , C. , Sivaraj , P. , Sonar , T. , Raja , S. et al. Resistance Spot Welding of Advanced High Strength Steel for Fabrication of Thin-Walled Automotive Structural Frames Forces Mech. 7 2022 100084
  28. Dhamothara Kannan , T. , Sivaraj , P. , Seeman , M. , and Balasubramanian , V. Effect of Rotational Speed on the Microstructure and Mechanical Properties of Rotary Friction Welded AISI 1018/AISI 1020 Asymmetrical Joints Mat. Test. 64 11 2022 1561 1571
  29. Sivaraj , P. , Bahavudeen , J.A. , and Balasubramanian , V. Optimizing Linear Friction Welding Parameters to Attain Maximum Tensile Strength in Aluminum Alloy Joints J. Adv. Micro. Res. 13 2 2018 204 210

Cited By