Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Quality Monitoring and Multi-Objective Optimization of the Glass Fiber-Reinforced Plastic Injection Molded Products

Journal Article
05-16-01-0004
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-16-01-0004
Published September 15, 2022 by SAE International in United States
Quality Monitoring and Multi-Objective Optimization of the Glass Fiber-Reinforced Plastic Injection Molded Products
Sector:
Citation: Liu, X., Fan, X., Guo, Y., Liu, Z. et al., "Quality Monitoring and Multi-Objective Optimization of the Glass Fiber-Reinforced Plastic Injection Molded Products," SAE Int. J. Mater. Manf. 16(1):35-47, 2023, https://doi.org/10.4271/05-16-01-0004.
Language: English

References

  1. Hentati , F. , Hadriche , I. , Masmoudi , N. et al. Optimization of the Injection Molding Process for the PC/ABS Parts by Integrating Taguchi Approach and CAE Simulation Int J Adv Manuf Technol 104 2019 4353 4363
  2. Xavier , S.S. , Alex , E.Z. , and Marcelo , H.A. Processing of Ultra-High Molecular Weight Polyethylene/Graphite Composites by Ultrasonic Injection Moulding: Taguchi Optimization Ultrason Sonochem 44 2018 350 358
  3. Li , S. , Fan , X.Y. , Huang , H.Y. et al. Multi-objective Optimization of Injection Molding Parameters, Based on the Gkriging-NSGA-Vague Method J Appl Polym Sci 137 2019 48659
  4. Sreedharan , J. and Jeevanantham , A.K. Optimization of Injection Molding Process to Minimize Weld-Line and Sink-Mark Defects Using Taguchi Based Grey Relational Analysis Mater Today: Proceedings 5 2018 12615 12622
  5. Kumar , B.P. , Venkataramaiah , P. , and Ganesh , J.S. Optimization of Process Parameters in Injection Moulding of a Polymer Composite Product by Using Gra Mater Today: Proceedings 18 7 2019 4637 4647
  6. Moayyedian , M. , Abhary , K. , and Marian , R. Optimization of Injection Molding Process Based on Fuzzy Quality Evaluation and Taguchi Experimental Design CIRP J Manuf Sci Technol 21 2018 150 160
  7. Cao , Y.L. , Fan , X.Y. , Guo , Y.H. et al. Multi-objective Optimization of Injection-Molded Plastic Parts Using Entropy Weight, Random Forest, and Genetic Algorithm Methods J Polym Eng 40 2020 360 371
  8. Sudsawat , S. and Sriseubsai , W. Warpage Reduction through Optimized Process Parameters and Annealed Process of Injection-Molded Plastic Parts J Mech Sci Technol 32 10 2018 4787 4799
  9. Heidari , B.S. , Davachi , S.M. , Moghaddam , A.H. et al. Optimization Simulated Injection Molding Process for Ultrahigh Molecular Weight Polyethylene Nanocomposite Hip Liner Using Response Surface Methodology and Simulation of Mechanical Behavior J Mech Behav Biomed Mater 81 2018 95 105
  10. Rizvi , S.J.A. , Singh , A.K. , and Bhadu , G.R. Optimization of Tensile Properties of Injection Molded α-Nucleated Polypropylene Using Response Surface Methodology Polym Test 60 2017 198 210
  11. Heidari , B.S. , Oliaei , E. , Shayesteh , H. et al. Simulation of Mechanical Behavior and Optimization of Simulated Injection Molding Process for PLA Based Antibacterial Composite and Nanocomposite Bone Screws Using Central Composite Design J Mech Behav Biomed Mater 65 2017 160 176
  12. Li , S. , Fan , X.Y. , Guo , Y.H. et al. Optimization of Injection Molding Process of Transparent Complex Multi-Cavity Parts Based on Kriging Model and Various Optimization Techniques Arab J Sci Eng 46 2021 11835 11845
  13. Song , Z.Y. , Liu , S.M. , Wang , X.X. et al. Optimization and Prediction of Volume Shrinkage and Warpage of Injection-Molded Thin-Walled Parts Based on Neural Network Int J Adv Manuf Technol 109 2020 755 769
  14. Tsai , K.M. and Luo , H.J. An Inverse Model for Injection Molding of Optical Lens Using Artificial Neural Network Coupled with Genetic Algorithm J Intell Manuf 28 2017 1 15
  15. Oliaei , E. , Heidari , B.S. , Davachi , S.M. et al. Warpage and Shrinkage Optimization of Injection-Molded Plastic Spoon Parts for Biodegradable Polymers Using Taguchi, ANOVA and Artificial Neural Network Methods J Mater Sci Technol 32 8 2016 710 720
  16. Guo , W. , Deng , F. , Meng , Z.H. et al. A Hybrid Back-Propagation Neural Network and Intelligent Algorithm Combined Algorithm for Optimizing Microcellular Foaming Injection Molding Process Parameters J Manuf Processes 50 2020 528 538
  17. Wang , H.S. , Wang , Y.N. , and Wang , Y.C. Cost Estimation of Plastic Injection Molding Parts through Integration of PSO and BP Neural Network Expert Syst Appl 40 2013 418 428
  18. Li , K. , Yan , S.L. , Pan , W.F. et al. Warpage Optimization of Fiber-Reinforced Composite Injection Molding by Combining Back Propagation Neural Network and Genetic Algorithm Int J Adv Manuf Technol 90 2017 963 970
  19. Bensingh , R.J. , Machavaram , R. , Boopathy , S.R. et al. Injection Molding Process Optimization of a Bi-Aspheric Lens Using Hybrid Artificial Neural Networks (ANNs) and Particle Swarm Optimization (PSO) Measurement 134 2019 359 374
  20. Chen , W. , Zhou , X.H. , Wang , H.F. et al. Multi-objective Optimal Approach for Injection Molding Based on Surrogate Model and Particle Swarm Optimization Algorithm J Shanghai Jiaotong Univ Sci 15 1 2010 88 93
  21. Kitayama , S. , Tamada , K. , Takano , M. et al. Numerical Optimization of Process Parameters in Plastic Injection Molding for Minimizing Weldlines and Clamping Force Using Conformal Cooling Channel J Manuf Processes 32 2018 782 790
  22. Liu , X. , Fan , X.Y. , Guo , Y.H. et al. Multi-objective Optimization of the GFRP Injection Molding Process Parameters by Using GA-ELM, MOFA and GRA-TOPSIS Trans Can Soc Mech Eng 46 1 2022 37 49
  23. Liu , D. , Qi , X.C. , Fu , Q. et al. A Resilience Evaluation Method for a Combined Regional Agricultural Water and Soil Resource System Based on Weighted Mahalanobis Distance and a Gray-TOPSIS Model J Clean Prod 229 2019 667 679
  24. He , C.M. , Kang , H.Y. , Yao , T. et al. An Effective Classifier Based on Convolutional Neural Network and Regularized Extreme Learning Machine Math Biosci Eng 16 6 2019 8309 8321
  25. Liu , X. , Fan , X.Y. , Guo , Y.H. et al. Warpage Optimization of the GFRP Injection Molding Process Parameters Microsyst Technol 27 12 2021 4337 4346
  26. Tatiana , V.S. Particle Swarm Optimisation in Designing Parameters of Manufacturing Processes: A Review (2008-2018) Appl Soft Comput J 84 2019 105743
  27. Feng , Q.Q. and Zhou , X.H. Automated and Robust Multi-Objective Optimal Design of Thin-Walled Product Injection Process Based on Hybrid RBF-MOGA Int J Adv Manuf Technol 101 2019 2217 2231
  28. Chang , C.C. and Lin , C.J. LIBSVM: A Library for Support Vector Machines ACM Trans Intell Syst Technol 2 3 2011 27
  29. Yang , X.S. Multi Objective Firefly Algorithm for Continuous Optimization Eng Comput 29 2013 175 184

Cited By