Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effect of Laser Beam Machining Process on Stainless Steel Performance Characteristic

Journal Article
05-15-03-0014
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-15-03-0014
Published March 02, 2022 by SAE International in United States
Effect of Laser Beam Machining Process on Stainless Steel Performance Characteristic
Sector:
Citation: Rahman, A., Chatterjee, P., Mondal, R., and Husain, M., "Effect of Laser Beam Machining Process on Stainless Steel Performance Characteristic," SAE Int. J. Mater. Manf. 15(3):207-218, 2022, https://doi.org/10.4271/05-15-03-0014.
Language: English

References

  1. Abu Mohammed , S. 2 2017
  2. Ahmed , N. , Darwish , S. , Alahmari , A.M. , and Shar , M.A. Micro-Channels by Nd: YAG Laser Beam Machining: Fabrication, Microstructures, and Micro-Hardness Profiles The International Journal of Advanced Manufacturing Technology 85 9-12 2016 1955 1968
  3. Amalnik , M.S. An Intelligent Knowledge Based System for CO 2 Laser Beam Machining for Optimization of Design and Manufacturing International Journal of Advanced Design & Manufacturing Technology 9 4 2016 39 50
  4. Amalnik , M.S. Expert System Approach for Manufacturability Evaluation of Nd: YAG Laser Beam Machining Process International Journal of Advanced Design & Manufacturing Technology 10 2 2017 15 24
  5. Bayerlein , F. , Zeller , C. , Wunderer , M. , Weirather , J. et al. Validation of Modeling Assumptions for the Buildup Simulation of Laser Beam Melting Based on the Residual Stress Distribution Proceeding ECOMAS Congress Crete Island, Greece 2016
  6. Bayerlein , F. , Zeller , C. , Zaeh , M.F. , Weirather , J. et al. Improving Cost Effectiveness in Additive Manufacturing-Increasing Dimensional Accuracy in Laser Beam Melting by Means of a Simulation-Supported Process Chain CADFEM GmbH (HRSG): ANSYS Conference and 33, CADFEM Users’ Meeting 2015 Bremen, Germany 2015
  7. Chatterjee , P. , Mondal , S. , Boral , S. , Banerjee , A. et al. A Novel Hybrid Method for Non-Traditional Machining Process Selection Using Factor Relationship and Multi-Attributive Border Approximation Method Facta Universitatis, Series: Mechanical Engineering 15 3 2017 439 456
  8. Chatterjee , S. , Mahapatraa , S.S. , Sahu , A.K. , Bhardwaj , V.K. et al. 2017
  9. Chib , S.S. and Agrawal , V.P. 2015
  10. Deris , A.M. , Zain , A.M. , Sallehuddin , R. , and Sharif , S. Harmony Search Optimization in Dimensional Accuracy of Die Sinking EDM Process Using SS316L Stainless Steel Journal of Physics: Conference Series 892 1 2017 012003
  11. Dutta , V. , Sharma , S. , Chopra , K. , and Singh , B. Hybrid Electric Discharge Machining Processes for Hard Materials: A Review Materials Focus 5 3 2016 202 208
  12. Ebanesar , J.R. and Mani , A. Falling Film Evaporation on a Thermal Spray Metal Coated Vertical Corrugated Plate Conduits Science and Technology for the Built Environment 23 6 2017 875 883
  13. Iribarren , V.E. , Fernández , A.E. , and Garrigós , A.G. Energy Efficiency of Flooded Roofs 106 The University of Alicante Museum 2016 163 175
  14. Jones , D.R. , Allgood , D.C. , and Saunders , G.P. 2016
  15. Jones , G.S. , Milholen , W.E. , Chan , D.T. , and Goodliff , S.L. A Sweeping Jet Application on a High Reynolds Number Semi-Span Supercritical Wing Configuration 35th AIAA Applied Aerodynamics Conference Denver, Colorado 2017 3044
  16. Jones , G.S. , Milholen , W.E. , Fell , J.S. , Webb , S.R. et al. Using Computational Fluid Dynamics and Experiments to Design Sweeping Jets for High Reynolds Number Cruise Configurations 8th AIAA Flow Control Conference Washington, D.C. 2016 3311
  17. Singh , G. and Kumar , K. A Review Paper on Laser Machining Journal of Advanced Research in Production and Industrial Engineering 4 3&4 2017 19 24
  18. Hejjaji , A. , Singh , D. , Kubher , S. , Kalyanasundaram , D. et al. Machining Damage in FRPs: Laser versus Conventional Drilling Composites Part A: Applied Science and Manufacturing 82 2016 42 52
  19. Korat , M.M. and Acharya , G.D. A Review on Current Research and Development in Abrasive Waterjet Machining J Eng Res Appl 4 1 2016 423 432
  20. Cacace , S. , Demir , A.G. , and Semeraro , Q. Densification Mechanism for Different Types of Stainless Steel Powders in Selective Laser Melting Procedia Cirp 62 2017 475 480
  21. Lutter-Günther , M. , Horn , M. , Seidel , C. and Reinhart , G. Influence of Particle Size Distribution on Powder Flowability and Part Properties in Laser Beam Melting Kynast , M. , Eichmann , M. , and Witt , G. Proceedings of the 14th Rapid Technical Conference München Carl Hanser 2017 297 311
  22. Madhavi , J.B. and Hiremath , S.S. Investigation on Machining of Holes and Channels on Borosilicate and Sodalime Glass Using μ-ECDM Setup Procedia Technology 25 2016 1257 1264
  23. Madić , M. , Radovanović , M. , Nedić , B. , and Marušić , V. Multi-Objective Optimization of Cut Quality Characteristics in CO 2 Laser Cutting of Stainless Steel Tehnički vjesnik 22 4 2015 885 892
  24. Mani , M. , Feng , S. , Lane , B. , Donmez , A. et al. Measurement Science Needs for Real-Time Control of Additive Manufacturing Powder Bed Fusion Processes International Journal of Production Research 55 5 2015 1400 1418
  25. Mani , M. , Lane , B.M. , Donmez , M.A. , Feng , S.C. et al. A Review on Measurement Science Needs for Real-Time Control of Additive Manufacturing Metal Powder Bed Fusion Processes International Journal of Production Research 55 5 2017 1400 1418
  26. Mukhraiya , V. , Yadav , R.K. , and Singh , P. Optimization of Various Parameters Related to Glass Scratches Removing Chemical Composition Technology 8 6 2017 1 9
  27. Nanavare , V.R. and Gandhi , G.S. 2017
  28. Nandi , S. and Kuar , A.S. Parametric Optimisation of Nd: YAG Laser Micro-Drilling of Alumina Using NSGA II International Journal of Machining and Machinability of Materials 17 1 2015 1 21
  29. Schoinochoritis , B. , Chantzis , D. , and Salonitis , K. Simulation of Metallic Powder bed Additive Manufacturing Processes with the Finite Element Method: A Critical Review Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 1 2017 96 117
  30. Sharma , G. and Singla , V.K. 2015
  31. Shinde , M.A.D. and Kubade , P.R. Investigation of Effect of Laser Beam Machining (LBM) Process Parameters on Performance Characteristics of Stainless Steel (SS 304) International Conference on Emerging Trends in Engineering, Technology and Architecture (iCETETA) D Y Patil College of Engineering and Technology, India 11 2017
  32. Tucker , J.D. , Miller , M.K. , and Young , G.A. Assessment of Thermal Embrittlement in Duplex Stainless Steels 2003 and 2205 for Nuclear Power Applications Acta Materialia 87 2015 15 24
  33. Wu , C. , Chen , W. , Zhang , H. , Yu , H. et al. The Hydration Mechanism and Performance of Modified Magnesium Oxysulfate Cement by Tartaric Acid Construction and Building Materials 144 2017 516 524
  34. arxiv.org 2016 https://arxiv.org/ftp/arxiv/papers/1707/1707.05166.pdf
  35. Wood , S.N. Generalized Additive Models: An Introduction with R London Chapman and Hall/CRC Press 2017
  36. Davim , J.P. Sustainable Machining New York Springer 2017
  37. Dubey , A.K. and Yadava , V. Laser Beam Machining—A Review Int J Mach Tool Manufacture 48 2008 609 628
  38. Kumar , N. , Kumar , H. , and Khurmi , J.S. Experimental Investigation of Process Parameters for Rapid Prototyping Technique (Selective Laser Sintering) to Enhance the Part Quality of Prototype by Taguchi Method Procedia Technology 23 2016 352 360
  39. Yang , G. , Lin , Q. , Ding , Y. et al. Laser Induced Breakdown Spectroscopy Based on Single Beam Splitting and Geometric Configuration for Effective Signal Enhancement Sci Rep 5 2015 7625

Cited By