This content is not included in your SAE MOBILUS subscription, or you are not logged in.

An Investigation on Drilling of Epoxy Composites by Taguchi Method

Journal Article
05-14-03-0020
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 21, 2021 by SAE International in United States
An Investigation on Drilling of Epoxy Composites by Taguchi Method
Sector:
Citation: Sahin, Y. and Şahin, H., "An Investigation on Drilling of Epoxy Composites by Taguchi Method," SAE Int. J. Mater. Manf. 14(3):293-302, 2021, https://doi.org/10.4271/05-14-03-0020.
Language: English

References

  1. Cauchan , S.R. , Kumar , A. , and Singh , I. Study on Friction Wear Behavior of Woven Glass Fiber Reinforced Vinylester Composites Manufactured with Different Comonomers J. Mater. Sci. 44 6338 6347 2009
  2. Ramulu , M. , Rao , P.N. , and Kao , H. Drilling of (Al 2 O 3 )p/6061 Metal Matrix Composites J. Mater. Process. Technol. 124 244 254 2002
  3. Khashaba , U.A. , EI-Sobaty , I.A. , Selmy , A.I. , and Megahed , A.A. Machinability Analysis in Drilling Woven GFR/Epoxy Composites: Part I-Effect of Machining Parameters Compos Part A 41 391 400 2010
  4. Davim , J.P. , Reis , P. , and Antonio , C.C. Experimental Study of Drilling Glass Fiber Reinforced Plastics (GFRP) Manufactured by Hand Lay-Up Compos. Sci. Technol. 64 289 297 2004
  5. Kilickap , E. Optimization of Cutting Parameters on Delamination Based on Taguchi Method during Drilling of GFRP Composite Expert. Syst. Appl. 37 6116 6122 2010
  6. Nanubala , N. , Yadav , M.J. , Danduk , C. , and Subbu , S.K. Optimization of Drilling Parameters of Fabricated GFRP Composite Using Taguchi Method 2016 International Conference on Energy Efficient Technologies for Sustainability (ICEETS) Nagercoil, India 2016 881 885
  7. Palanikumar , K. , Srinivasan , T. , Rajagopal , K. , and Latha , B. Thrust Force Analysis in Drilling Glass Fiber Reinforced/Polypropylene (GFR/PP) Composites Mater Manuf. Process. 31 581 586 2016
  8. Phadnis , V.A. , Makhdum , F. , Roy , A. , and Silberschmidt , V.V. Drilling in Carbon/Epoxy Composites: Experimental Investigations and Finite Element Implementation Compos. Part A 47 41 51 2013
  9. Guo , D.M. , Wen , Q. , Gao , H. , and Bao , Y. Prediction of the Cutting Forces Generated in the Drilling of Carbon-Fiber Reinforced Plastic Composites Using a Twist Drill Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 226 1 28 2011
  10. Rajamurugan , T.V. , Shanmugam , K. , and Palanikumar , K. Analysis of Delamination in Drilling Glass Fiber Reinforced Polyester Composites Mater. Des. 45 80 87 2013
  11. Tan , C.L. , Azmi , A.I. , and Muhammad , N. Delamination and Surface Roughness Analyses in Drilling Hybrid Carbon/Glass Composite J. Mater. Manuf. Process. 31 10 1366 1376 2015
  12. Velayudham , A. , Krishnamurth , R. , and Soundarapandiyan , T. Evaluation of Drilling Characteristics of High-Volume Fraction Fiber Glass Reinforced Polymeric Composite Int. J. Mach. Tools Manuf. 45 399 406 2013
  13. Sunnya , T. , Babua , J. , and Philip , J. Experimental Studies on Effect of Process Parameters on Delamination in Drilling GFRP Composites Using Taguchi Method Procedia Maters. Sci. 6 1131 1142 2014
  14. Tsao , C.C. and Hocheng , H. Taguchi Analysis of Delamination Associated with Various Drill Bits in Drilling of Composite Material Int. J. Mach. Tools Manuf. 44 1085 1090 2004
  15. Hochenga , H. and Tsao , C.C. Effects of Special Drill Bits on Drilling-Induced Delamination of Composite Materials Int. J. Mach. Manuf. 46 1408 1416 2006
  16. Rubio , J.C. , Abrao , A.M. , Faria , P.E. , Correia , A.E. et al. Effects of High Speed in the Drilling of Glass Fiber Reinforced Plastic: Evaluation of the Delamination Factor Int. J. Mach. Tools Manuf. 48 715 720 2008
  17. Pandian , A. , Variavan , M. , and Uthayakumar , M. Analysis of Delamination in Drilling of Basalt Fiber Reinforced Polymer Composites Mater. Phys. Mech. 24 1 8 2015
  18. Bonnet , C. , Poulachon , G. , Rech , J. , Girard , Y. et al. CFRP Drilling: Fundamental Study of Local Feed Force and Consequences on Hole Exit Damage Int. J. Mach. Tools Manuf. 94 57 64 2015
  19. Ma , F.J. , Zhu , X.L. , Kang , R.K. , Dong , Z.G. et al. Study on the Subsurface Damages of Glass Fiber Reinforced Composites Adv. Mater. Res. 797 691 695 2013
  20. Srinivasan , T. , Palanikumar , K. , Rajagopal , K. , and Latha , B. Optimization of Delamination Factor in Drilling GFR-Polypropylene Composites J. Mater. Manuf. Process. 32 226 233 2016
  21. Palanikumar , K. Experimental Investigation and Optimization in Drilling of GFRP Composites Measurement 44 2138 2148 2011
  22. Murthy , B.R.N. , Raj Rodrigues , L.L. , and Sharma , N.Y. Influence of Process Parameters on the Quality of Hole in Drilling of GFRP Composites—An Experimental Investigation Using DOE 2nd International Conference on Mechanical & Electrical Technology Singapore 2010 87 90
  23. Durão , L.M.P. , Gonçalves , D.J.S. , Tavares , J.M. , Albuquerque , V.H. et al. Drilling Tool Geometry Evaluation for Reinforced Composite Laminates Compos. Struct. 92 1545 1550 2010
  24. Ramirez , C. , Poulachon , G. , Rossi , F. , and M’Saoubi , R. Tool Wear Monitoring and Hole Surface Quality during CFRP Drilling Proc. CIRP 13 163 168 2014
  25. Panchagnula , K.K. , and Palaniyandi , K. Drilling on Fiber Reinforced Polymer/Nanopolymer Composite Laminates: A Review Mater. Res. Technol. 7 180 189 2018
  26. Abrao , A.M. , Faria , P.E. , Rubio , C.J.C. , Reis , P. et al. Drilling of Fiber Reinforced Plastics: A Review J. Mater. Process. Technol. 186 1 7 2007
  27. Liu , D.F. , Tang , Y.J. , and Cong , W.L. A Review of Mechanical Drilling for Composite Laminates Compos. Struct. 94 1265 1279 2012
  28. Brinksmeier , E. , Fangmann , S. , and Rentsch , R. Drilling of Carbon Filled Composites and Resulting Surface Integrity Manuf. Technol. 60 57 60 2011
  29. Roy , R.K. A Primer on the Taguchi Method Dearborn, MI Society of Manufacturing Engineers 1990
  30. Şahin , Y. and Şahin , F. Dry Wear Behavior of Basalt/Carbon Fabric-Reinforced Epoxy Composite by Taguchi Method Lecture Notes in Mechanical Engineering: Proceedings of the 7th International Conference on Fracture Fatigue and Wear Ghent, Belgium 2018 581 590
  31. Halim , A. , Huda , N.F. , and Aminanda , Y. Experimental Study of Cutting Parameter for Drilling on Fabric Carbon/Epoxy Laminates Int. J. Mach. Tools Manuf. 92 18 22 2013
  32. Rajmohan , T. Experimental Investigation and Optimization of Machining Parameters in Drilling of Fly Ash-Filled Carbon Fiber Reinforced Composites Particulate Science and Technology 37 21 30 2016 https://doi.org/10.1080/02726351.2016.1205686
  33. Burak Kayba , H. , Unuvar , A. , Kaynak , Y. , and Avci , A. Evaluation of Boron Nitride Nanoparticles on Delamination in Drilling Carbon Fiber Epoxy Nanocomposite Materials Journal of Composite Materials 54 215 227 2020
  34. Kaybal , H.B. , Ünüvar , A. , Koyunbakan , M. , and Avcı , A. A Novelty Optimization Approach for Drilling of CFRP Nanocomposite Laminates The International Journal of Advanced Manufacturing Technology 100 9-12 2995 3001 2019
  35. Kumar , D. , and Singh , K.K. Investigation of Delamination and Surface Quality of Machined Holes in Drilling of Multiwalled Carbon Nanotube Doped Epoxy/Carbon Fiber Reinforced Polymer Nanocomposite Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications 233 647 663 2017 10.1177/1464420717692369
  36. Sakthivel , M. Drilling Analysis on Basalt/Sisal Reinforced Polymer Composites Using ANOVA and Regression Model Applied Mathematical Sciences 9 3285 3290 2015 http://dx. doi.org/10.12988/ams.2015.54315
  37. Çelik , Y.H. , Kilickap , E. , and Koçyiğit , N. Evaluation of Drilling Performances of Nanocomposites Reinforced with Graphene and Graphene Oxide The International Journal of Advanced Manufacturing Technology 100 2371 2385 2019
  38. Shahrajabian , H. , Farahnakian , M. , and Moghri , M. Machining Operation Parameters in Drilling Process; Variation of Thrust Forces in Epoxy/TiO 2 Based Nanocomposites Journal of Modern Process in Manufacturing and Production 5 5 10 2016
  39. Soleymani Yazdi , M.R. , Razfar , M.R. , and Asadnia , M. Modelling of the Thrust Force of the Drilling Operation on PA6-Nanoclay Nanocomposites Using Particle Swarm Optimization Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225 1757 1176 2011
  40. Ragunath , S. , Velmurugan , C. , and Kannan , T. Optimization of Drilling Delamination Behavior of GFRP/Clay Nano-Composites Using RSM and GRA Methods Fibers and Polymers 18 2400 2409 2017
  41. Belhocine , A. FE Prediction of Thermal Performance and Stresses in an Automotive Disc Brake System Int. J. Adv. Manuf. Technol. 89 3563 3578 2017 10.1007/s00170-016-9357-y
  42. Bahçe , E. , Kılıçkap , E. , and Özel , C. Al-5005’in delinmesinde delme parametrelerinin çapak oluşumuna etkisinin araştırılması 2. Ulusal Tasarım İmalat ve Analiz Kongresi Balıkesir, Sayfa 2010 242 250
  43. Belhocine , A. A Thermomechanical Model for the Analysis of Disc Brake Using the Finite Element Method in Frictional Contact Journal of Thermal Stresses 43 3 305 320 2020

Cited By