This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Design and Analysis of a Formula SAE Vehicle Chain Sprocket under Static and Fatigue Loading Conditions
- Piyush Arora - Vellore Institute of Technology (VIT), India ,
- Mihir Rajesh Agrawal - Vellore Institute of Technology (VIT), India ,
- Punish Pal Singh - Vellore Institute of Technology (VIT), India ,
- N Gobinath - Vellore Institute of Technology (VIT), India ,
- M Feroskhan - Vellore Institute of Technology (VIT), India
Journal Article
05-14-03-0018
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Topic:
Citation:
Arora, P., Agrawal, M., Singh, P., Gobinath, N. et al., "Design and Analysis of a Formula SAE Vehicle Chain Sprocket under Static and Fatigue Loading Conditions," SAE Int. J. Mater. Manf. 14(3):275-282, 2021, https://doi.org/10.4271/05-14-03-0018.
Language:
English
References
- Rai , R. , Anand , S. , Choudhary , S. , Sashank , G. et al. Designing and Validation of a Sprocket Wheel for a Formula Student Vehicle International Journal of Engineering Research & Technology (IJERT) 9 5 1300 1304 2020 https://doi.org/10.17577/IJERTV9IS050911
- Shinde , P. , and Gaikwad , H. Optimum Sprocket Ratio for Vehicle Based on Modelling and Simulation IAETSD Journal for Advanced Research in Applied Sciences VI IV 7 12 2019
- Ping , C.H. Shift-Time Limited Acceleration: Final Drive Ratios in Formula SAE SAE Technical Paper 2004-01-3554 2004 https://doi.org/10.4271/2004-01-3554
- Ramesh , K.M. , Naik , V.M. , and Sathyanarayana , M.L. Design of Efficient Powertrain System for a Motorsports Race Car Using a Bike Engine IOP Conf. Ser.: Mater. Sci. Eng. 376 012102 2018 https://doi.org/10.1088/1757-899X/376/1/012102
- Pawar , S. , Potdar , S. , Bhor , O. , and Gunjal , A. Design of Efficient and Optimised Drivetrain Assembly International Research Journal of Engineering and Technology (IRJET) 07 05 1 10 2020
- Vasoya , S.N. , Koradiya , P.L. , and Patel , B.J. Development of Sprocket to Improvement the Torque for Off Road Bike 3rd International Conference on Multidisciplinary Research & Practice International Journal of Engineering Science & Technology 4 1 68 73 2016
- Newman , K. , and Dekraker , P. Modeling the Effects of Transmission Gear Count, Ratio Progression, and Final Drive Ratio on Fuel Economy and Performance Using ALPHA SAE Technical Paper 2016-01-1143 2016 https://doi.org/10.4271/2016-01-1143
- Suthar , R. Analysis of Sprocket Strength Finite Element Analysis Method International Journal of Advanced in Management, Technology and Engineering Sciences 7 12 109 119 2017
- Chinna Maddaiah , K. and Diwakar Reddy , Y. Design and Analysis of Chain Sprocket Using Reverse Engineering IOP Conf. Ser.: Mater. Sci. Eng. 455 012123 2018 https://doi.org/10.1088/1757-899X/455/1/012123
- Nikam , P. and Tanpure , R. Design Optimization of Chain Sprocket Using Finite Element Analysis International Journal of Engineering Research and Application 6 9 (Part-5) 66 69 2016
- Ross , J. and Meyer , J. Simulating the Dynamic Behaviour of Chain Drive Systems by Advanced CAE Programs SAE Technical Paper 960298 1996 https://doi.org/10.4271/960298
- Burgess , S. and Lodge , C. Optimisation of the Chain Drive System on Sports Motorcycles Sports Eng 7 65 73 2004 https://doi.org/10.1007/BF02915918
- Badawane , P. , Bandre , R. , and Kharche , L. Analysis and Design of Sprocket Driven Transmission System International Journal of Science and Research (IJSR) 8 2 1375 1378 2019 https://doi.org/10.21275/ART20195435
- Madhu Maheswara Reddy , Y. and Ravi Chande , P. Fatigue Analysis of Chain Sprocket Using Finite Element Analysis International Journal of Advance Engineering and Research Development (IJAERD) 5 04 917 922 2018
- Mathew , A. , Santhosh , A. , Vinodh , S. , and Ramesh , P. Sustainable Design of Sprocket through CAD and CAE: A Case Study Deepak , B. , Parhi , D. , and Jena , P. Innovative Product Design and Intelligent Manufacturing Systems Lecture Notes in Mechanical Engineering Singapore Springer 2020 https://doi.org/10.1007/978-981-15-2696-1_2
- Singh , J. , Tyagi , M.R. , Singh , G. , and Sharma , R.D. Design, Analysis and Manufacturing of Front Sprocket of a Bicycle using Carbon Fiber Reinforced Plastics Journal of Physics 2019 https://doi.org/10.1088/1742-6596/1240/1/012071
- Afzal , Y. , Jha , V. , and Mohapatra , A. A Comparative Study Based on ANSYS Analysis of Existing Sprocket’s Material with High Performance Engineering Plastic Materials International Research Journal of Engineering & Applied Sciences 2 3 01 07 2014
- Bhandari , V.B. Design of Machine Element Third New York McGraw Hill 2010 0-07-061141-6
- Sudagar , J. , Venkateswarlu , K. , and Lian , J. Dry Sliding Wear Properties of a 7075-T6 Aluminum Alloy Coated with Ni-P (h) in Different Pretreatment Conditions J Mater Eng Perform 19 810 818 2010 https://doi.org/10.1007/s11665-009-9545-0