Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Crashworthiness Performance of Multi-Cornered Structures under Quasi-Static Compression and Dynamic Axial Loading Conditions

Journal Article
05-14-02-0012
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-14-02-0012
Published August 11, 2020 by SAE International in United States
Crashworthiness Performance of Multi-Cornered Structures under Quasi-Static Compression and Dynamic Axial Loading Conditions
Sector:
Citation: Tyan, T., Aekbote, K., Chen, G., and Link, T., "Crashworthiness Performance of Multi-Cornered Structures under Quasi-Static Compression and Dynamic Axial Loading Conditions," SAE Int. J. Mater. Manf. 14(2):153-193, 2021, https://doi.org/10.4271/05-14-02-0012.
Language: English

References

  1. Pugsley , A. and Macaulay , M. The Large-Scale Crumpling of Thin Cylindrical Shells Under Axial Loading Quart. J. Mech. Appl. Math. 13 1 9 1960
  2. Alexander , J. An Approximate Analysis of the Collapse of Thin Cylindrical Shells under Axial Loading Quart. J. Mech. Appl. Math. 13 1 10 15 1960
  3. Magee , C.L. and Thornton , P.H. Design Considerations in Energy Absorption by Structural Collapse SAE Technical Paper 780434 1978 https://doi.org/10.4271/780434
  4. Andrews , K.R.F. , England , G.L. , and Ghani , E. Classification of the Axial Collapse of Cylindrical Tubes under Quasi-Static Loading Int J Mech Sci 25 9-10 687 696 1983
  5. Wierzbicki , T. and Abramowicz , W. On the Crushing Mechanics of Thin-Walled Structures J Appl Mech 50 4A 727 734 1983
  6. Abramowicz , W. and Jones , N. Dynamic Axial Crushing of Square Tubes Int J Impact Eng 2 2 179 208 1984
  7. Abramowicz , W. and Jones , N. Dynamic Progressive Buckling of Circular and Square Tubes Int J Impact Eng 4 4 243 270 1986
  8. Langseth , M. and Hopperstad , O.S. Static and Dynamic Axial Crushing of Square Thin-Walled Aluminium Extrusions Int J Impact Eng 18 949 968 1996
  9. Abramowicz , W. and Wierzbicki , T. Axial Crushing of Multi-Corner Sheet Metal Columns Appl. Mech. - Trans ASME 56 1 113 120 1989
  10. Mamalis , A.G. , Manolakos , D.E. , Baldoukas , A. , and Viegelahn , G. Energy Dissipation and Associated Failure Modes When Axially Loading Polygon Thin-Walled Cylinders Thin Wall Struct. 12 1 17 34 1991
  11. Mamalis , A.G. , Manolakos , D.E. , Ioannidis , M.B. , Kostazos , P.K. et al. Finite Element Simulation of the Axial Collapse of Metallic Thin-Wall Tubes with Octagonal Cross-Section Thin Wall Struct. 41 891 900 2003
  12. Yamashita , M. , Gotoh , M. , and Sawairi , Y. Axial Crush of Hollow Cylindrical Structures with Various Polygonal Cross-Sections Numerical Simulation and Experiment Journal of Materials Processing Technology 140 59 64 2003
  13. Gonzales , M. , Chitoor , K. , Kim , H. , Tyan , T. et al. Testing and Modeling of Metallic Multicorner Columns in Axial Crush SAE Technical Paper 2005-01-0353 2005 https://doi.org/10.4271/2005-01-0353
  14. Gonzales , M. , Chitoor , K. , Kim , H. , Tyan , T. et al. Modeling Energy Absorption and Deformation of Multi-Corner Columns in Lateral Bending SAE Technical Paper 2006-01-0123 2006 https://doi.org/10.4271/2006-01-0123
  15. Kim , H. and Tyan , T. 2003
  16. Tyan , T. et al. 2006
  17. Chen , G. , Shi , M.F. , and Tyan , T. Mass Efficient Cross-Sections Using Dual Phase Steels for Axial and Bending Crushes SAE Technical Paper 2007-01-0978 2007 https://doi.org/10.4271/2007-01-0978
  18. Chen , G. , Shi , M. , and Tyan , T. Cross-Section Optimization for Axial and Bending Crushes Using Dual Phase Steels SAE Technical Paper 2008-01-1125 2008 https://doi.org/10.4271/2008-01-1125 SAE International Journal of Materials and Manufacturing
  19. Chen , G. , Link , T. M. , Shi , M. , Tyan , T. et al. Axial Crash Testing and Finite Element Modeling of A 12-Sided Steel Component SAE Technical Paper 2010-01-0379 2010 https://doi.org/10.4271/2010-01-0379 SAE International Journal of Materials and Manufacturing,
  20. Chen , G. , Shi , M.F. , and Tyan , T. Fracture Modeling of AHSS in Component Crush Tests SAE Technical Paper 2011-01-0001 2011 https://doi.org/10.4271/2011-01-0001 SAE International Journal of Materials and Manufacturing,
  21. Tyan , T. , Hu , Y.K. , Sun , D. , Shaner , L. et al. Simulation and Optimization of an Aluminum-Intensive Body-on-Frame Vehicle for Improved Fuel Economy and Enhanced Crashworthiness - Front Impacts SAE Technical Paper 2015-01-0573 2015 https://doi.org/10.4271/2015-01-0573 SAE Int. J. Mater. Manf. 8 3 823 852
  22. Abbasi , M. , Reddy , S. , Ghafari-Nazari , A. , and Fard , M. Multiobjective Crashworthiness Optimization of Multi-Cornered Thin-Walled Sheet Metal Members Thin Wall Struct. 89 31 34 2015
  23. Reddy , S. , Abbasi , M. , and Fard , M. Multi-Cornered Thin-Walled Sheet Metal Members for Enhanced Crashworthiness and Occupant Protection Thin Wall Struct. 94 56 66 2015
  24. Alavi , N.A. and Hamedani , J.H. Comparative Analysis of Energy Absorption and Deformations of Thin Walled Tubes with Various Section Geometries Extrusions Thin-Walled Struct 48 946 954 2010
  25. Tang , Z. , Liu , S. , and Zhang , Z. Energy Absorption Properties of Non-Convex Multi-Corner Thin-Walled Columns Thin-Walled Struct 51 51 112 120 2012
  26. Zhang , X. and Zhang , H. Experimental and Numerical Investigation on Crush Resistance of Polygonal Columns and Angle Elements Thin-Walled Struct 57 25 36 2012
  27. Lee , S. , Hahn , C. , Rhee , M. , and Oh , J. Effect of Triggering on the Energy Absorption Capacity of Axially Compressed Aluminum Tubes Materials and Design 20 3 40 1999
  28. Hosseinipour , S.J. and Daneshi , G.H. Energy Absorbtion and Mean Crushing Load of Thin-Walled Grooved Tubes under Axial Compression Thin-Walled Struct 41 1 31 46 2003
  29. Zhang , X.W. , Tian , Q.D. , and Yu , T.X. Axial Crushing of Circular Tubes with Buckling Initiators Thin-Walled Struct 47 6-7 788 797 2009
  30. Zhang , X.W. , Su , H. , and Yu , T.X. Energy Absorption of An Axially Crushed Square Tube with a Buckling Initiator Internal Journal of Impact Engineering 367 3 402 417 2009
  31. Jiang , W. and Yang , J.L. Energy-Absorption Behavior of a Metallic Double-Since-Wave Beam under Axial Crushing Thin-Walled Struct 47 11 1168 1176 2009
  32. Qureshi , O.M. and Bertocchi , E. Crash Performance of Notch Triggers and Variable Frequency Progressive-Triggers on Patterned Box Beams during Axial Impact Thin Wall Structure 53 98 105 2013
  33. Qureshi , O.M. and Bertocchi , E. Crash Behavior of Thin-Walled Box Beams with Complex Sinusoidal Relief Patterns Thin Wall Struct 53 217 223 2013
  34. Liu , S. , Tong , Z. , Tang , Z. , Liu , Y. et al. Bionic Design Modification of Non-convex Multi-corner Thin-Walled Columns for Improving Energy Absorption through Adding Bulkheads Thin Wall Struct 88) 71 81 2015
  35. Zhang , X. , Zhang , H. , and Wen , Z. Axial Crushing of Tapered Circular Tubes with Graded Thickness Internal Journal of Mechanical Sciences 92) 12 23 2015
  36. Zhang , H. and Zhang , X. Crashworthiness Performance of Conical Tubes with Nonlinear Thickness Distribution Thin Wall Struct 99) 35 44 2016
  37. Mahdi , E. , Hamouda , A.M.S. , Sahari , B.S. , and Khalid , Y.A. Experimental Quasi-Static Axial Crushing of Cone-Tube-Cone Composite System Composite: Part B 34 285 302 2003
  38. Elgalai , A.M. , Hahdi , E. , Hamouda , A.M.S. , Sahari , B.S. et al. Crushing Response of Composite Corrugated Tubes to Quasi-Static Axial Loading Composite Structure 66 665 671 2004
  39. Abdewi , E.F. , Sulaiman , S. , Hamouda , A.M.S. , and Mahdi , E. Effect of Geometry on the Crushing Behavior of Laminated Corrugated Composite Tubes Journal of Materials Processing Technology 172 394 399 2006
  40. Abdewi , E.F. , Sulaiman , S. , Van Hamouda , D. , and Mahdi , E. Quasi-Static Axial and Lateral Crushing of Radial Corrugated Composite Tubes Thin-Walled Struct 51 320 332 2008
  41. Palanivelu , S. , Paepegem , W. , Degrieck , J. , Kaogiannis , D. et al. Comparative Study of the Quasi-Static Energy Absorption of Small-scale Composite Tubes with Different Geometrical Shapes for Use in Sacrificial Cladding Structures Polymer Testing 29 381 396 2010
  42. Chen , G. , Huang , L. , Link , T.M. , Tyan , T. , and Aekbote , K. Calibration and Validation of GISSMO Damage Model for A 780-MPa Third Generation Advanced High Strength Steel SAE Technical Paper 2020-01-0198 2020 https://doi.org/10.4271/2020-01-0198

Cited By

Recommended Content

Technical Paper Development of Advanced Dimensional Control Method for Design for Six Sigma (DFSS)
Technical Paper Spot-weld Layout Optimization for Body Stiffness by Topology Optimization
Technical Paper Full Vehicle Tailored Parts Optimization - Light Weighting