The SAE MOBILUS platform will continue to be accessible and populated with high quality technical content during the coronavirus (COVID-19) pandemic. x
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effect of Shot Peening Conditions on the Fatigue Life of Additively Manufactured A357.0 Parts

  • Journal Article
  • 05-13-02-0009
  • ISSN: 1946-3979, e-ISSN: 1946-3987
Published January 9, 2020 by SAE International in United States
Effect of Shot Peening Conditions on the Fatigue Life of Additively Manufactured A357.0 Parts
Citation: Gatto, A., Sola, A., and Tognoli, E., "Effect of Shot Peening Conditions on the Fatigue Life of Additively Manufactured A357.0 Parts," SAE Int. J. Mater. Manf. 13(2):2020.
Language: English


  1. Oerlikon , “Additive Manufacturing. The Next Industrial Revolution,” Factsheet II, 12, 2017,
  2. Sanz, C. and García Navas, V. , “Structural Integrity of Direct Metal Laser Sintered Parts Subjected to Thermal and Finishing Treatments,” Journal of Materials Processing Technology 213:2126-2136, 2013.
  3. Brandl, E., Heckenberger, U., Holzinger, V., and Buchbinder, D. , “Additive Manufactured AlSi10Mg Samples Using Selective Laser Melting (SLM): Microstructure, High Cycle Fatigue, and Fracture Behavior,” Materials & Design 34:159-169, 2012,
  4. Aboulkhair, N.T., Maskery, I., Tuck, C., Ashcroft, I. et al. , “Improving the Fatigue Behaviour of a Selectively Laser Melted Aluminium Alloy: Influence of Heat Treatment and Surface Quality,” Materials & Design 104:174-182, 2016.
  5. Uzan, N.E., Shneck, R., Yeheskel, O., and Frage, N. , “Fatigue of AlSi10Mg Specimens Fabricated by Additive Manufacturing Selective Laser Melting (AM-SLM),” Materials Science and Engineering A 704:229-237, 2017.
  6. Uzan, N.E., Ramati, S., Shneck, R., Frage, N. et al. , “On the Effect of Shot-Peening on Fatigue Resistance of AlSi10Mg Specimens Fabricated by Additive Manufacturing Using Selective Laser Melting (AM-SLM),” Additive Manufacturing 21:458-464, 2018.
  7. Bassoli, E., Denti, L., Comin, A., Sola, A. et al. , “Fatigue Behavior of As-Built L-PBF A357.0 Parts,” Metals 8(8):634, 2018,
  8. Gatto, A., Bassoli, E., Denti, L., Sola, A. et al. , “Effect of Three Different Finishing Processes on the Surface Morphology and Fatigue Life of A357.0 Parts Produced by Laser-Based Powder Bed Fusion,” Advanced Engineering Materials 21:11, 2019.
  9. Xiong, W., Hao, L., Li, Y., Tang, D. et al. , “Effect of Selective Laser Melting Parameters on Morphology, Microstructure, Densification and Mechanical Properties of Supersaturated Silver Alloy,” Materials and Design 170:107697, 2019,
  10. Fousova, M., Dvorsky, D., Vronka, M., Vojtech, D. et al. , “The Use of Selective Laser Melting to Increase the Performance of AlSi9Cu3Fe Alloy,” Materials 11:1918, 2018,
  11. Aversa, A., Marchese, G., Saboori, A., Bassini, E. et al. , “New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review,” Materials 12(7):1007, 2019,
  12. Kempen, K., Yasa, E., Thijs, L., Kruth, J.-P. et al. , “Microstructure and Mechanical Properties of Selective Laser Melted 18Ni-300 Steel,” Physics Procedia 12:255-263, 2011.
  13. Mengucci, P., Barucca, G., Gatto, A., Bassoli, E. et al. , “Effects of Thermal Treatments on Microstructure and Mechanical Properties of a Co-Cr-Mo-W Biomedical Alloy Produced by Laser Sintering,” Journal of the Mechanical Behavior of Biomedical Materials 60:106-117, 2016.
  14. Herzog, D., Seyda, V., Wycisk, E., and Emmelmann, C. , “Additive Manufacturing of Metals,” Acta Materialia 117:371-392, 2016.
  15. Bassoli, E., Sola, A., Celesti, M., Calcagnile, S. et al. , “Development of Laser-Based Powder Bed Fusion Process Parameters and Scanning Strategy for New Metal Alloy Grades: A Holistic Method Formulation,” Materials 11:2356, 2018,
  16. Sercombe, T.B. and Li, X. , “Selective Laser Melting of Aluminium and Aluminium Metal Matrix Composites: Review,” Materials Technology 31:77-85, 2016.
  17. Rosenthal, I., Stern, A., and Frage, N. , “Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) Technology,” Metallography, Microstructure, and Analysis 3:448-453, 2014.
  18. Ding, Y., Muñiz-Lerma, J.A., Trask, M., Chou, S. et al. , “Microstructure and Mechanical Property Considerations in Additive Manufacturing of Aluminum Alloys,” MRS Bulletin 41:745-751, 2016.
  19. AlMangour, B. and Yang, J.-M. , “Improving the Surface Quality and Mechanical Properties by Shot-Peening of 17-4 Stainless Steel Fabricated by Additive Manufacturing,” Materials & Design 110:914-924, 2016,
  20. Jain, A. , “A Database for Shot Peening Parameters and Desired Residual Stress Distribution,” in: International Conference on Shot Peening and Blast Cleaning, Bhopal, India, 2001.
  21. Denti, L. , “Additive Manufactured A357.0 Samples Using the Laser Powder Bed Fusion Technique: Shear and Tensile,” Metals 8:670, 2018,
  22. Kaufman, J.G. , “Understanding Wrought and Cast Aluminum Alloy Designations,” in: Introduction to Aluminum Alloys and Tempers (Materials Park, OH: ASM International, 2000), Chapter 3, 23-37.
  23. Kaufman, J.G. and Rooy, E.L. , Aluminum Alloy Castings: Properties, Processes, and Applications (Materials Park, OH: ASM International, 2004).
  24. Dawes, J., Bowerman, R., and Trepleton, R. , “Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain,” Johnson Matthey Technology Review 59:243-256, 2015.
  25. Pyttel, B., Schwerdt, D., and Berger, C. , “Very High Cycle Fatigue - Is There a Fatigue Limit?” International Journal of Fatigue 33:49-58, 2011.
  26. Sakai, T. , “Review and Prospects for Current Studies on Very High Cycle Fatigue of Metallic Materials for Machine Structural Use,” Journal of Solid Mechanics and Materials Engineering 3:425-439, 2009.
  27. European Committee for Standardization , “Aerospace Series-Test Methods for Metallic Materials-Constant Amplitude Force-Controlled High Cycle Fatigue Testing,” UNI EN 3987 (Brussels, Belgium: European Committee for Standardization, 2010).
  28. Mower, T.M. and Long, M.J. , “Mechanical Behavior of Additive Manufactured, Powder-Bed Laser-Fused Materials,” Materials Science and Engineering A 651:198-213, 2016,
  29. Intensity Review,” The Shot Peener 23(Spring):4, 2009.
  30. Bagherifard, S., Ghelichi, R., and Guagliano, M. , “On the Shot Peening Surface Coverage and Its Assessment by Means of Finite Element Simulation: A Critical Review and Some Original Developments,” Applied Surface Science 259:186-194, 2012.
  31. Champaign, J. , “Shot Peening Intensity Measurement,” The Shot Peener 6(Winter):1-6, 1992/93.
  32. Zirshot® Ceramic Beads, Saint-Gobain, Data Sheet.
  33. Guagliano, M. , “Relating Almen Intensity to Residual Stresses Induced by Shot Peening: A Numerical Approach,” Journal of Materials Processing Technology 110:277-286, 2001.
  34. Luong, H. and Hill, M.R. , “The Effects of Laser Peening and Shot Peening on High Cycle Fatigue in 7050-T7451 Aluminum Alloy,” Materials Science and Engineering A 527:699-707, 2010.
  35. ISO 4287:1997 , “Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Terms, Definitions and Surface Texture Parameters,” International Organization for Standardization, Geneva, Switzerland, 1997.
  36. ISO 4288:1996 , “Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Rules and Procedures for the Assessment of Surface Texture,” International Organization for Standardization, Geneva, Switzerland, 1996.
  37. ISO 25178-603:2013 , “Geometrical Product Specifications (GPS) - Surface Texture: Areal - Part 603: Nominal Characteristics of Non-contact (Phase-Shifting Interferometric Microscopy) Instruments,” International Organization for Standardization, Geneva, Switzerland, 2013.
  38. ISO 16610-21:2011 , “Geometrical Product Specifications (GPS) - Filtration - Part 21: Linear Profile Filters: Gaussian Filters,” International Organization for Standardization, Geneva, Switzerland, 2011.
  39. Townsend, A., Senin, N., Blunt, L., Leach, R.K. et al. , “Surface Texture Metrology for Metal Additive Manufacturing: A Review,” Precision Engineering 46:34-47, 2016.
  40. Lou, S., Jiang, X., Sun, W., Zeng, W. et al. , “Characterisation Methods for Powder Bed Fusion Processed Surface Topography,” Precision Engineering 57:1-15, 2019,
  41. Fox, J.C., Moylan, S.P., Lane, B.M., Whitenton, B.M. et al. , “Preliminary Study toward Surface Texture as a Process Signature in Laser Powder Bed Fusion Additive Manufacturing,” in: 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, Rayleigh, NC, 2016.
  42. Zygo , “MxTM Surface Texture Parameters,” OMP-0608A, Jan. 2017.
  43. Downey, T.J.G., Martin, P., Sedlaček, M., and Beaulieu, L.Y. , “A Computational Analysis of the Application of Skewness and Kurtosis to Corrugated and Abraded Surfaces,” Quarterly Physics Review 3, 2017.
  44. Aversa, A., Lorusso, M., Trevisan, F., Ambrosio, E.P. et al. , “Effect of Process and Post-process Conditions on the Mechanical Properties of an A357 Alloy Produced via Laser Powder Bed Fusion,” Metals 8:68, 2017,
  45. Mehmood, A. and Hammouda, M.M.I. , “Effect of Shot Peening on the Fatigue Life of 2024 Aluminum Alloy,” in: Failure of Engineering Materials & Structures, FEMS, 2007, Code 02,
  46. Warmuzek, M. , Aluminum-Silicon Casting Alloys: Atlas of Microfractographs (Materials Park, OH: ASM International, 2004).
  47. Aboulkhair, N.T., Simonelli, M., Parry, L., Ashcroft, I. et al. , “3D Printing of Aluminium Alloys: Additive Manufacturing of Aluminium Alloys Using Selective Laser Melting,” Progress in Materials Science 106:100578, 2019,
  48. Yan, C., Hao, L., Hussein, A., Young, P. et al. , “Microstructure and Mechanical Properties of Aluminium Alloy Cellular Lattice Structures Manufactured by Direct Metal Laser Sintering,” Materials Science and Engineering A 628:238-246, 2015,
  49. Takata, N., Kodaira, H., Sekizawa, K., Suzuki, A. et al. , “Change in Microstructure of Selectively Laser Melted AlSi10Mg Alloy with Heat Treatments,” Materials Science & Engineering A 704:218-228, 2017,
  50. Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J. et al. , “On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties,” Materials 10:76, 2017,

Cited By