This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Improving Hole Expansion Ratio by Parameter Adjustment in Abrasive Water Jet Operations for DP800
Journal Article
05-11-03-0023
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Topic:
Citation:
Behrens, B., Diaz-Infante, D., Altan, T., Yilkiran, D. et al., "Improving Hole Expansion Ratio by Parameter Adjustment in Abrasive Water Jet Operations for DP800," SAE Int. J. Mater. Manf. 11(3):241-252, 2018, https://doi.org/10.4271/05-11-03-0023.
Language:
English
References
- Hall , J.N. , Coryell , J. , Wendt , B. , and Adamski , D. Case Studies of Edge Fracture of Dual Phase Steel Stampings SAE Int. J. Mater. Manuf. 8 3 783 788 2015 10.4271/2015-01-0529
- Karelova , A. , Krempaszky , C. , Werner , E. , Tsipouridis , P. et al. Hole Expansion of Dual-Phase and Complex-Phase AHS Steels-Effect of Edge Conditions Steel Research International 80 1 71 77 2009
- Shih , H.C. , Hsiung , C.K. , and Wendt , B. Optimal Production Trimming Process for AHSS Sheared Edge Stretchability Improvement SAE Technical Paper 2014-01-0994 2014 10.4271/2014-01-0994
- Konieczny , A. and Henderson , T. On Formability Limitations in Stamping Involving Sheared Edge Stretching SAE Technical Paper 2007-01-0340 2007 10.4271/2007-01-0340
- Gläsner , T. , Sunderkötter , C. , Plath , A. , Volk , W. et al. Methods to Decrease Cut Edge Sensitivity of High Strength Steels Key Engineering Materials 611 1294 1307 2014
- Wang , K. , Luo , M. , and Wierzbicki , T. Experiments and Modeling of Edge Fracture for an AHSS Sheet International Journal of Fracture 187 2 245 268 2014
- Pathak , N. , Butcher , C. , and Worswick , M. Influence of the Sheared Edge Condition on the Hole Expansion of Dual Phase Steel Proc. IDDRG2013 (Zürich) 2013 213 218
- Zhou , D. , Du , C. , Siekirk , J. , McGuire , J. et al. A practical Failure Limit for Sheared Edge Stretching of Automotive Body Panels SAE Technical Paper 2010-01-0986 2010
- Behrens , B.A. , Hübner , S. , Bouguecha , A. , Knigge , J. et al. Local Strain Hardening of Metal Components by Means of Martensite Generation Advanced Materials Research 137 1 33 2010
- Schneider , M. , Geffert , A. , Peshekhodov , I. , Bouguecha , A. et al. Overview and Comparison of Various Test Methods to Determine Formability of a Sheet Metal Cut-Edge and Approaches to the Test Results Application in Forming Analysis Materialwissenschaft und Werkstofftechnik 46 12 1196 1217 2015
- Krajcarz , D. Comparison Metal Water Jet Cutting with Laser and Plasma Cutting Procedia Engineering 69 838 843 2014
- Sartkulvanich , P. , Kroenauer , B. , Golle , R. , Konieczny , A. et al. Finite Element Analysis of the Effect of Blanked Edge Quality Upon Stretch Flanging of AHSS CIRP Annals 59 1 279 282 2010
- Shih , H.C. , Chiriac , C. , and Shi , M.F. The Effects of AHSS Shear Edge Conditions on Edge Fracture ASME 2010 International Manufacturing Science and Engineering Conference 2010 599 608
- Wu , X. , Bahmanpour , H. , and Schmid , K. Characterization of Mechanically Sheared Edges of Dual Phase Steels Journal of Materials Processing Technology 212 6 1209 1224 2012
- Ragu , K. Experimental Analysis of Die Clearance Distribution in a Press Tool Assembly Transactions of FAMENA 38 4 55 64 2015
- Soares , J.A. , Gipiela , M.L. , Lajarin , S.F. , and Marcondes , P.V.P. Study of the Punch-Die Clearance Influence on the Sheared Edge Quality of Thick Sheets The International Journal of Advanced Manufacturing Technology 65 1-4 451 457 2013
- Mori , K. , Abe , Y. , and Suzui , Y. Improvement of Stretch Flangeability of Ultra-High Strength Steel Sheet by Smoothing of Sheared Edge Journal of Materials Processing Technology 210 4 653 659 2010
- Dubey , A.K. and Yadava , V. Multi-Objective Optimisation of Laser Beam Cutting Process Optics & Laser Technology 40 3 562 570 2008
- Lamikiz , A. , López de Lacalle , L.N. , Sanchez , J.A. , Del Pozo , D. et al. CO2 Laser Cutting of Advanced High Strength Steels (AHSS) Applied Surface Science 242 3-4 362 368 2005
- Thomas , D.J. Understanding the Effects of Mechanical and Laser Cut-Edges to Prevent Formability Ruptures during Automotive Manufacturing Journal of Failure Analysis and Prevention 13 4 451 462 2013
- Wang , J. and Wong , W.C.K. A Study of Abrasive Waterjet Cutting of Metallic Coated Sheet Steels International Journal of Machine Tools and Manufacture 39 6 855 870 1999
- Hashish , M. A Modeling Study of Metal Cutting with Abrasive Waterjets Journal of Engineering Materials and Technology 106 1 88 100 1984
- Kechagias , J. , Petropoulos , G. , and Vaxevanidis , N. Application of Taguchi Design for Quality Characterization of Abrasive Water Jet Machining of TRIP Sheet Steels The International Journal of Advanced Manufacturing Technology 62 5-8 635 643 2012
- Vaxevanidis , N.M. , Markopoulos , A. , and Petropoulos , G. Artificial Intelligence in Manufacturing Research 79 99 2010
- Hascalik , A. , Çaydaş , U. , and Gürün , H. Effect of Traverse Speed on Abrasive Waterjet Machining of Ti-6Al-4V Alloy Materials & Design 28 6 1953 1957 2007
- Mori , K. , Abe , Y. , Kidoma , Y. , and Kadarno , P. Slight Clearance Punching of Ultra-High Strength Steel Sheets Using Punch Having Small Round Edge International Journal of Machine Tools and Manufacture 65 41 46 2013
- Barile , C. , Casavola , C. , Pappalettera , G. , and Pappalettere , C. Analysis of Crack Propagation in Stainless Steel by Comparing Acoustic Emissions and Infrared Thermography Data Engineering Failure Analysis 69 35 42 2016
- Behrens , B.-A. , Bouguecha , A. , Buse , C. , Wölki , K. et al. Potentials of in Situ Monitoring of Aluminum Alloy Forging by Acoustic Emission Archives of Civil and Mechanical Engineering 16 4 724 733 2016
- Behrens , B.-A. , Hübner , S. , and Wölki , K. Acoustic Emission-A Promising and Challenging Technique for Process Monitoring in Sheet Metal Forming Journal of Manufacturing Processes 29 281 288 2017
- Neslušan , M. , Mičieta , B. , Mičietová , A. , Čilliková , M. et al. Detection of Tool Breakage During Hard Turning through Acoustic Emission at Low Removal Rates Measurement 70 1 13 2015
- Matthias , S. , Loderer , A. , Koch , S. , Gröne , M. et al. Metrological Solutions for an Adapted Inspection of Parts and Tools of a Sheet-Bulk Metal Forming Process Production Engineering 10 1 51 61 2016
- DIN 10130 2007
- TATA STEEL 2017
- Kim , H. , Shang , J. , Dykeman , J. , Samant , A. et al. Practical Evaluation and Prediction of Edge Cracking in Forming Advanced High Strength Steels (AHSS) SAE Technical Paper 2017-01-0308 2017 10.4271/2017-01-0308
- Huang , Y.M. and Chien , K.H. The Formability Limitation of the Hole-Flanging Process Journal of Materials Processing Technology 117 1-2 43 51 2001
- Atzema , E. , Borsutzki , M. , Braun , M. , Brockmann , S. A European Round Robin Test for the Hole Expansion Test According to ISO 16630 New Developments in Sheet Metal Forming Stuttgart 2012