Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Residual Stresses and Plastic Deformation in Self-Pierce Riveting of Dissimilar Aluminum-to-Magnesium Alloys

Journal Article
05-11-02-0015
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-11-02-0015
Published May 08, 2018 by SAE International in United States
Residual Stresses and Plastic Deformation in Self-Pierce Riveting of Dissimilar Aluminum-to-Magnesium Alloys
Sector:
Citation: Moraes, J., Jordon, J., Su, X., Brewer, L. et al., "Residual Stresses and Plastic Deformation in Self-Pierce Riveting of Dissimilar Aluminum-to-Magnesium Alloys," SAE Int. J. Mater. Manf. 11(2):139-150, 2018, https://doi.org/10.4271/05-11-02-0015.
Language: English

References

  1. Barnes , T.A. and Pashby , I.R. Joining Techniques for Aluminum Spaceframes Used in Automobiles. Part II - Adhesive Bonding and Mechanical Fasteners J. Mater. Process. Technol. 99 72 79 2000 10.1016/S0924-0136(99)00361-1
  2. Yan , J. , Xu , Z. , Li , Z. , Li , L. et al. Microstructure Characteristics and Performance of Dissimilar Welds between Magnesium Alloy and Aluminum Formed by Friction Stirring Scr. Mater. 53 585 589 2005 10.1016/j.scriptamat.2005.04.022
  3. Czerwinski , F. Welding and Joining of Magnesium Alloys Magnesium Alloys - Design Processing and Properties Croatia InTech 2008 469 490 10.5772/13947
  4. Florea , R.S. , Solanki , K.N. , Bammann , D.J. , Baird , J.C. et al. Resistance Spot Welding of 6061-T6 Aluminum: Failure Loads and Deformation Mater. Des. 34 624 630 2012 10.1016/j.matdes.2011.05.017
  5. He , X. , Pearson , I. , and Young , K. Self-Pierce Riveting for Sheet Materials: State of the Art J. Mater. Process. Technol. 199 27 36 2008 10.1016/j.jmatprotec.2007.10.071
  6. Mortimer , J. Jaguar Uses X350 Car to Pioneer Use of Self-Piercing Rivets Ind. Robot 28 192 198 2001 10.1108/01439910110389344
  7. Huang , L. , Lasecki , J. , Guo , H. , and Su , X. Fatigue and Fretting of Mixed Metal Self-Piercing Riveted Joints ASME 2014 International Mechanical Engineering Congress and Explosition Montreal, Canada 2014 1 6
  8. Barnes , T.A. and Pashby , I.R. Joining Techniques for Aluminium Spaceframes Used in Automobiles Part I - Solid and Liquid Phase Welding J. Mater. Process. Technol. 99 62 71 2000 10.1016/S0924-0136(99)00367-2
  9. Cai , W. , Wang , P.C. , and Yang , W. Assembly Dimensional Prediction for Self-Piercing Riveted Aluminum Panels Int. J. Mach. Tools Manuf. 45 695 704 2005 10.1016/j.ijmachtools.2004.09.023
  10. Moraes , J.F.C. , Jordon , J.B. , and Bammann , D.J. Finite Element Analysis of Self-Pierce Riveting in Magnesium Alloys Sheets J. Eng. Mater. Technol. 137 2 2015 10.1115/1.4029032
  11. Porcaro , R. , Hanssen , A.G. , Langseth , M. , and Aalberg , A. Self-Piercing Riveting Process: An Experimental and Numerical Investigation J. Mater. Process. Technol. 171 10 20 2006 10.1016/j.jmatprotec.2005.05.048
  12. Casalino , G. , Rotondo , A. , and Ludovico , A. On the Numerical Modelling of the Multiphysics Self Piercing Riveting Process Based on the Finite Element Technique Adv. Eng. Softw. 39 787 795 2008 10.1016/j.advengsoft.2007.12.002
  13. Huang , L. , Moraes , J.F.C. , Sediako , D.G. , Jordon , J.B. et al. Finite-Element and Residual Stress Analysis of Self-Pierce Riveting in Dissimilar Metal J. Manuf. Sci. Eng. 139 1 11 2017 10.1115/1.4034437
  14. Atzeni , E. , Ippolito , R. , and Settineri , L. Experimental and Numerical Appraisal of Self-Piercing Riveting CIRP Ann. - Manuf. Technol. 58 17 20 2009 10.1016/j.cirp.2009.03.081
  15. Hoang , N.H. , Porcaro , R. , Langseth , M. , and Hanssen , A.G. Self-Piercing Riveting Connections Using Aluminium Rivets Int. J. Solids Struct. 47 427 439 2010 10.1016/j.ijsolstr.2009.10.009
  16. Huang , L. , Lasecki , J. , Guo , H. , and Su , X. Finite Element Modeling of Dissimilar Metal Self-piercing Riveting Process SAE Int. J. Mater. Manf. 7 3 698 705 2014 10.4271/2014-01-1982
  17. Su , Z.M. , Lin , P.C. , Lai , W.J. , and Pan , J. Fatigue Analyses of Self-Piercing Rivets and Clinch Joints in Lap-Shear Specimens of Aluminum Sheets Int. J. Fatigue 72 53 65 2015 10.1016/j.ijfatigue.2014.09.022
  18. Skorupa , A. , Skorupa , M. , Machniewicz , T. , and Korbel , A. Fatigue Crack Location and Fatigue Life for Riveted Lap Joints in Aircraft Fuselage Int. J. Fatigue 58 209 217 2014 10.1016/j.ijfatigue.2013.01.014
  19. Webster , G.A. and Ezeilo , A.N. Residual Stress Distributions and Their Influence on Fatigue Lifetimes Int. J. Fatigue 23 375 383 2001 10.1016/S0142-1123(01)00133-5
  20. Torres , M.A. and Voorwald , H.J. An Evaluation of Shot Peening, Residual Stress and Stress Relaxation on the Fatigue Life of AISI 4340 Steel Int. J. Fatigue 24 877 886 2002 10.1016/S0142-1123(01)00205-5
  21. Zhuang , W.Z. and Halford , G.R. Investigation of Residual Stress Relaxation under Cyclic Load Int. J. Fatigue 23 Supple 31 37 2001 10.1016/S0142-1123(01)00132-3
  22. Haque , R. , Beynon , J.H. , Durandet , Y. , Kirstein , O. et al. Feasibility of Measuring Residual Stress Profile in Different Self-Pierce Riveted Joints Sci. Technol. Weld. Join. 17 60 68 2012 10.1179/1362171811Y.0000000076
  23. Haque , R. , Beynon , J.H. , Kirstein , O. , Wong , Y.C. et al. Evaluation of Residual Stress in SPR Joint by Neutron Diffraction Adv. Mater. Res. 409 575 580 2012
  24. Haque , R. , Wong , Y.C. , Paradowska , A. , and Durandet , Y. Residual Stress Profiles in Riveted Joints of Steel Sheets Sci. Technol. Weld. Join. 20 199 208 2015 10.1179/1362171814Y.0000000272
  25. Murray , C.E. and Cevdet Noyan , I. Applied and Residual Stress Determination Using X-Ray Diffraction Schajer G.S. Practical Residual Stress Measurement Methods Chichester John Wiley & Sons, Ltd 2013 139 161 10.1002/9781118402832.ch6
  26. Zhu , F. , Chou , C.C. , Yang , K.H. , Chen , X. et al. Calibrating Material Parameters to Model the Thin-Walled Components Made of Die Cast AM60B Magnesium Alloy Int. J. Crashworthiness 17 540 552 2012 10.1080/13588265.2012.698577
  27. Winzer , R. and Glinicka , A. The Static and Dynamic Compressive Behaviour of Selected Aluminium Alloys Eng. Trans. 59 85 100 2011
  28. Mocko , W. , Rodrıguez-Martınez , J.A. , Kowalewski , Z.L. , and Rusinek , A. Compressive Viscoplastic Response of 6082-T6 and 7075-T6 Aluminium Alloys under Wide Range of Strain Rate at Room Temperature: Experiments and Modelling Strain 48 498 509 2012 10.1111/j.1475-1305.2012.00847.x
  29. Van Hall , S.N. , Findley , K.O. , and Campbell , A.M. Evaluating the Performance of Current Self-Pierce Rivet Technology for the Joining of High Strength Steel and Aluminum Alloys ASME 2014 International Manufacturing Science and Engineering Conference Detroit, MI 2014 1 5
  30. Abaqus Analysis User’s Manual (V. 6.14) 2014
  31. Cahoon , J.R. , Broughton , W.H. , and Kutzak , A.R. The Determination of Yield Strength from Hardness Measurements Metall. Trans. 2 1979 1983 1971 10.1007/BF02913433
  32. Liu , Z.X. , Liu , A.L. , Wang , M.X. , Sun , R.N. et al. Self-Piercing Riveting of Wrought Magnesium AZ31 J. Manuf. Sci. Eng. 133 1 9 2011 10.1115/1.4004138
  33. Haque , R. , Durandet , Y. , Wong , Y.C. , Paradowska , A. et al. Optimising Parameters for Meaningful Measurement of Residual Strain by Neutron Diffraction in Self-Pierce Riveted Joints Sci. Technol. Weld. Join. 18 492 499 2013 10.1179/1362171813Y.0000000126

Cited By