This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Optimization of WEDM Cutting Parameters on Surface Roughness of 2379 Steel Using Taguchi Method

Journal Article
05-11-02-0010
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 07, 2018 by SAE International in United States
Optimization of WEDM Cutting Parameters on Surface Roughness of 2379 Steel Using Taguchi Method
Sector:
Citation: Jaafar, N., Abdullah, A., and Samad, Z., "Optimization of WEDM Cutting Parameters on Surface Roughness of 2379 Steel Using Taguchi Method," SAE Int. J. Mater. Manf. 11(2):97-104, 2018, https://doi.org/10.4271/05-11-02-0010.
Language: English

References

  1. Singh , V. and Pradhan , S. Optimization of WEDM Parameters Using Taguchi Technique and Response Surface Methodology in Machining of AISI D2 Steel Procedia Engineering 97 1597 1608 2014 10.1016/j.proeng.2014.12.310
  2. Klink , A. , Guo , Y. , and Klocke , F. Surface Integrity Evolution of Powder Metallurgical Tool Steel by Main Cut and Finishing Trim Cuts in Wire-EDM Procedia Engineering 19 178 183 2011 10.1016/j.proeng.2011.11.098
  3. Li , L. , Guo , Y. , Wei , X. , and Li , W. Surface Integrity Characteristics in Wire-EDM of Inconel 718 at Different Discharge Energy Procedia CirP 6 220 225 2013 10.1016/j.procir.2013.03.046
  4. Dhobe , M. , Chopde , I. , and Gogte , C. Investigations on Surface Characteristics of Heat Treated Tool Steel after Wire Electro-Discharge Machining Materials and Manufacturing Processes 28 1143 1146 2013 10.1080/10426914.2013.822976
  5. Al-Khazraji , A. , Amin , S.A. , and Ali , S.M. The Effect of SiC Powder Mixing Electrical Discharge Machining on White Layer Thickness, Heat Flux and Fatigue Life of AISI D2 Die Steel Engineering Science and Technology: An International Journal 19 1400 1415 2016 10.1016/j.jestch.2016.01.014
  6. Antar , M. , Soo , S. , Aspinwall , D. , Jones , D. et al. Productivity and Workpiece Surface Integrity When WEDM Aerospace Alloys Using Coated Wires Procedia Engineering 19 3 8 2011 10.1016/j.proeng.2011.11.071
  7. Basil Kuriachen , J.P. and Mathew , J. Modeling of Wire Electrical Discharge Machining of Alloy Steel (Ti-6Al-4V) International Journal of Emerging Technology and Advanced Engineering 13 1989 1995 2012 10.1007/s12541-012-0262-5
  8. Ram Prasad , A.V.S. , Kiran Kumar , B. , and Sridhar , V. Parametric Optimization for MRR and Surface Roughness in Wire EDM of D2 Steel Using Taguchi Method Journal of Engineering and Technology Research 2 6 43 52 2013
  9. Manjaiah , M. , Laubscher , R.F. , Kumar , A. , and Basavarajappa , S. Parametric Optimization of MRR and Surface Roughness in Wire Electro Discharge Machining (WEDM) of D2 Steel Using Taguchi-Based Utility Approach International Journal of Mechanical and Materials Engineering 11 7 2016 10.1186/s40712-016-0060-4
  10. Patel , B. and Rathod , K. Multi-Parameter Analysis and Modeling of Surface Roughness in Electro Discharge Machining of AISI D2 Steel International Journal of Scientific & Engineering Research 3 1 6 2012
  11. Ikram , A. , Mufti , N.A. , Saleem , M.Q. , and Khan , A.R. Parametric Optimization for Surface Roughness, Kerf and MRR in Wire Electrical Discharge Machining (WEDM) Using Taguchi Design of Experiment Journal of Mechanical Science and Technology 27 2133 2141 2013 10.1007/s12206-013-0526-8
  12. Lodhi , B.K. and Agarwal , S. Optimization of Machining Parameters in WEDM of AISI D3 Steel Using Taguchi Technique Procedia CIRP 14 194 199 2014 10.1016/j.procir.2014.03.080
  13. Liu , J. , Li , L. , and Guo , Y. Surface Integrity Evolution from Main Cut to Finish Trim Cut in W-EDM of Shape Memory Alloy Procedia CIRP 13 137 142 2014 10.1016/j.procir.2014.04.024
  14. Li , L. , Wei , X. , and Li , Z. Surface Integrity Evolution and Machining Efficiency Analysis of W-EDM of Nickel-Based Alloy Applied Surface Science 313 138 143 2014 10.1016/j.apsusc.2014.05.165
  15. Jangra , K.K. , Kumar , V. , and Kumar , V. An Experimental and Comparative Study on Rough and Trim Cutting Operation in WEDM of Hard to Machine Materials Procedia Materials Science 5 1603 1612 2014 10.1016/j.mspro.2014.07.348
  16. Jangra , K. Study of Unmachined Area in Intricate Machining after Rough Cut in WEDM International Journal of Industrial Engineering Computations 3 887 892 2012 10.5267/j.ijiec.2012.05.003
  17. Selvakumar , G. , Jiju , K.B. , Sarkar , S. , and Mitra , S. Enhancing Die Corner Accuracy through Trim Cut in WEDM The International Journal of Advanced Manufacturing Technology 83 791 803 2016 10.1007/s00170-015-7606-0
  18. Cao , C. , Zhang , X. , Zha , X. , and Dong , C. Surface Integrity of Tool Steels Multi-cut by Wire Electrical Discharge Machining Procedia Engineering 81 1945 1951 2014 10.1016/j.proeng.2014.10.262
  19. Ali , M.A.M. , Jaafar , N.A. , Abullah , R.I.R. , Hussein , N.I.S. et al. Performance of Wire-EDM Parameters on Machining Characteristics of Titanium Alloy (Ti6Al4V) Using Taguchi Method Malaysia University Conference Engineering Technology Melaka, Malaysia 2014
  20. Dong , S. and Dapino , M.J. Wear Reduction through Piezoelectrically-Assisted Ultrasonic Lubrication Smart Materials and Structures 23 104005 2014 10.1088/0964-1726/23/10/104005
  21. Dong , S. and Dapino , M. Experiments on Ultrasonic Lubrication Using a Piezoelectrically-Assisted Tribometer and Optical Profilometer JoVE (Journal of Visualized Experiments) 103 e52931 e52931 2015 10.3791/52931
  22. Mishra , S.K. , Singh , S. , Singh , S. , Singh , S. et al. Optimization of Process Parameters in WEDM Process International Journal of Advanced Research and Innovation 4 69 73 2016
  23. Kumar , V. , Jangra , K. , and Kumar , V. Effect of WEDM Parameters on Machinability of Nimonic-90 Proceedings of the National Conference on Trends and Advances in Mechanical Engineering (TAME) Faridabad 2012 511 516
  24. Jangra , K.K. An Experimental Study for Multi-Pass Cutting Operation in Wire Electrical Discharge Machining of WC-5.3% Co Composite The International Journal of Advanced Manufacturing Technology 76 971 982 2015 10.1007/s00170-014-6218-4

Cited By