Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Improvement in DCT Shaft Lubrication through CFD Method

Journal Article
04-11-03-0011
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/04-11-03-0011
Published October 25, 2018 by SAE International in United States
Improvement in DCT Shaft Lubrication through CFD Method
Sector:
Citation: Cao, Z., Chen, Y., Su, T., Liu, H. et al., "Improvement in DCT Shaft Lubrication through CFD Method," SAE Int. J. Fuels Lubr. 11(3):219-228, 2018, https://doi.org/10.4271/04-11-03-0011.
Language: English

References

  1. Fietkau , P. and Bertsche , B. Influence of Tribological and Geometrical Parameters on Lubrication Conditions and Noise of Gear Transmissions Mechanism and Machine Theory 69 303 320 2013 10.1016/j.mechmachtheory.2013.06.007
  2. Wang , Y. , Song , G. , Niu , W. , and Chen , Y. Influence of Oil Injection Methods on the Lubrication Process of High Speed Spur Gears Tribology International 121 180 189 2018 10.1016/j.triboint.2018.01.062
  3. Marques , P. , Fernandes , C. , Martins , R. , and Seabra , J. Power Loss at Low Speed in a Gearbox Lubricated with Wind Turbine Gear Oils with Special Focus on Churning Losses Tribology International 62 186 197 2013 10.1016/j.triboint.2013.02.026
  4. Liu , H. , Jurkschat , T. , Lohner , T. , and Stahl , K. Determination of Oil Distribution and Churning Power Loss of Gearboxes by Finite Volume CFD Method Tribology International 109 346 354 2017 10.1016/j.triboint.2016.12.042
  5. Höhn , B. , Michaelis , K. , and Otto , H. Influence of Immersion Depth of Dip Lubricated Gears on Power Loss, Bulk Temperature and Scuffing Load Carrying Capacity International Journal of Mechanics and Materials in Design 4 2 145 156 2008 10.1007/s10999-007-9045-z
  6. Luke , P. and Olver , A. A Study of Churning Losses in Dip-Lubricated Spur Gears Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 213 5 337 346 1999 10.1243/0954410991533061
  7. Liu , Y. , Dong , P. , Liu , Y. , and Xu , X. Design and Application of Electric Oil Pump in Automatic Transmission for Efficiency Improvement and Start-Stop Function Journal of Central South University 23 3 570 580 2016 10.1007/s11771-016-3104-2
  8. Saegusa , D. and Kawai , S. CFD Analysis of Lubricant Fluid Flow in Automotive Transmission SAE Technical Paper 2014-01-1772 2014 10.4271/2014-01-1772
  9. Lin , Y. , Zang , M. , Hu , Z. , and Chen , Y. Flow Field Simulation and Lubrication Effect Evaluation of an Oil Orbit of Dual Clutch Automatic Transmission China Mechanical Engineering 24 22 3052 3056 2013 10.3969/j.issn.1004-132X.2013.22.014
  10. Chen , Y. , Luo , D. , Fu , J. , Chen , H. et al. The Development Practices of Mass Produced Dual Clutch Automatic Transmission Based on CAE Simulation Automotive Engineering 35 11 1015 1022 2013 10.19562/j.chinasae.qcgc.2013.11.013
  11. Srinivasan , V. , Salazar , A. , and Saito , K. Modeling the Disintegration of Modulated Liquid Jets Using Volume-of-Fluid (VOF) Methodology Applied Mathematical Modelling 35 8 3710 3730 2011 10.1016/j.apm.2011.01.040
  12. Li , L. , Versteeg , H. , Hargrave , G. , Potter , T. et al. Numerical Investigation on Fluid Flow of Gear Lubrication SAE Technical Paper 2008-01-1650 2008 10.4271/2008-01-1650
  13. Peng , Q. , Gui , L. , and Fan , Z. Numerical Simulation of Splash Lubrication in Vehicle Drive Axle Automotive Engineering 38 12 1500 1507 2016 10.19562/j.chinasae.qcgc.2016.12.016
  14. Wang , J. , Gong , B. , Liu , J. , An , Q. et al. Behavior of Oil-Air Lubrication Using in Roller Bearings System Journal of East China University of Science and Technology 33 3 436 440 2007 10.14135/j.cnki.1006-3080.2007.03.030
  15. Zhou , Z. Effect of Lubrication Oil and Cooling on Transmission Efficiency and Service Life of Gears Journal of China Coal Society 34 1 116 120 2009 10.13225/j.cnki.jccs.2009.01.024
  16. Jiang , S. and Mao , H. Investigation of the High Speed Rolling Bearing Temperature Rise with Oil-Air Lubrication Journal of Tribology 133 2 2011 10.1115/1.4003501

Cited By