This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Novel Combustion Chamber to Physically Stratify the Charge in a Gasoline Direct Injection Engine

Journal Article
03-16-03-0016
ISSN: 1946-3936, e-ISSN: 1946-3944
Published May 17, 2022 by SAE International in United States
A Novel Combustion Chamber to Physically Stratify the Charge in a
                    Gasoline Direct Injection Engine
Sector:
Citation: Jose, J., Mittal, M., Ramesh, A., Gnanakotaiah, G. et al., "A Novel Combustion Chamber to Physically Stratify the Charge in a Gasoline Direct Injection Engine," SAE Int. J. Engines 16(3):267-289, 2023, https://doi.org/10.4271/03-16-03-0016.
Language: English

References

  1. Park , C. , Kim , S. , Kim , H. , and Moriyoshi , Y. Stratified Lean Combustion Characteristics of a Spray-Guided Combustion System in a Gasoline Direct Injection Engine Energy 41 1 2012 401 407 https://doi.org/10.1016/j.energy.2012.02.060
  2. Eichhorn , A. , Lejsek , D. , Hettinger , A. , and Kufferath , A. Challenge Determining a Combustion System Concept for Downsized SI-Engines - Comparison and Evaluation of Several Options for a Boosted 2-Cylinder SI-Engine SAE Technical Paper 2013-01-1730 2013 https://doi.org/10.4271/2013-01-1730
  3. Zhao , F. , Lai , M. , and Harrington , D.L. Automotive Spark-Ignited Direct-Injection Gasoline Engines Prog. Energy Combust. Sci. 25 1999 437 562
  4. Zhao , H. Advanced Direct Injection Combustion Engine Technologies and Development 1st Oxford Woodhead Publishing Limited 2010 https://doi.org/10.1533/9781845697327
  5. Kume , T. , Iwamoto , Y. , Iida , K. , Murakami , M. et al. Combustion Control Technologies for Direct Injection SI Engine SAE Technical Paper 960600 1996 https://doi.org/10.4271/960600
  6. Ratnak , S. , Kusaka , J. , Daisho , Y. , and Yoshimura , K. Experiments and Simulations of a Lean-Boost Spark Ignition Engine for Thermal Efficiency Improvement SAE Int. J. Engines 9 1 2016 379 396
  7. Su , Y.H. and Kuo , T.F. CFD-Assisted Analysis of the Characteristics of Stratified-Charge Combustion inside a Wall-Guided Gasoline Direct Injection Engine Energy 175 2019 151 164 https://doi.org/10.1016/j.energy.2019.03.031
  8. Fraidl , G.K. , Piock , W.F. , and Wirth , M. Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems SAE Technical Paper 960465 1996 https://doi.org/10.4271/960465
  9. Jackson , N.S. , Stokes , J. , Whitaker , P.A. , and Lake , T.H. Stratified and Homogeneous Charge Operation for the Direct Injection Gasoline Engine - High Power with Low Fuel Consumption and Emissions SAE Technical Paper 970543 1997 https://doi.org/10.4271/970543
  10. Jung , D. , Sasaki , K. , Sugata , K. , Matsuda , M. et al. Combined Effects of Spark Discharge Pattern and Tumble Level on Cycle-to-Cycle Variations of Combustion at Lean Limits of SI Engine Operation SAE Technical Paper 2017-01-0677 2017 https://doi.org/10.4271/2017-01-0677
  11. Küsell , M. , Moser , W. , and Philipp , M. Motronic MED7 for Gasoline Direct Injection Engines: Engine Management System and Calibration Procedures SAE Technical Paper 1999-01-1284 1999 https://doi.org/10.4271/1999-01-1284
  12. Banerjee , R. and Kumar , S. Numerical Investigation of Stratified Air/Fuel Preparation in a GDI Engine Appl. Therm. Eng. 104 2016 414 428 https://doi.org/10.1016/j.applthermaleng.2016.05.050
  13. Biemelt , A. , Eibl , R. , Karl , G. , Kraemer , S. et al. 2002
  14. Li , B.Z. , Liu , S.H. , Nong , J.J. , Gong , Y.F. et al. Development of a Direct-Injection Stratified-Charge Methanol Engine Proc. Inst. Mech. Eng. Part D: J. Automob. Eng. 222 11 2008 1937 1945 https://doi.org/10.1243/09544070JAUTO905
  15. Itoh , T. , Kakuho , A. , Hiraya , K. , Takahashi , E. et al. A Study of Mixture Formation Processes in Direct Injection Stratified Charge Gasoline Engines by Quantitative Laser-Induced Fluorescence Imaging and the Infrared Absorption Method Int. J. Engine Res. 7 5 2006 423 434 https://doi.org/10.1243/14680874JER04705
  16. Ogi , T. and Morikawa , K. 2005
  17. Saito , H. and Sakai , T. 2008
  18. Franco , R.L. , da Costa , R.B. , Gomes Júnior , C.A. , Rodrigues Filho , F.A. et al. Lean Burn Combustion Influence on Stratified Charge Ethanol Direct Injection Engine SAE Technical Paper 2016-36-0306 2016 https://doi.org/10.4271/2016-36-0306
  19. Biswas , S. and Ekoto , I. Spark Assisted Compression Ignition Engine with Stratified Charge Combustion and Ozone Addition SAE Int. J. Adv. & Curr. Prac. in Mobility 2 1 2019 385 400 https://doi.org/10.4271/2019-01-2253
  20. Yaoita , Y. 1998
  21. Kaminaga , T. , Yamaguchi , K. , Ratnak , S. , Kusaka , J. et al. A Study on Combustion Characteristics of a High Compression Ratio SI Engine with High Pressure Gasoline Injection SAE Technical Paper 2019-24-0106 2019 https://doi.org/10.4271/2019-24-0106
  22. Alperstein , M. , Schafer , G.H. , and Villforth , F.J. Texaco’s Stratified Charge Engine - Multifuel Efficient, Clean, and Practical SAE Technical Paper 740563 1974 https://doi.org/10.4271/740563
  23. Jones , C. A Progress Report on Curtiss-Wright’s Rotary Stratified Charge Engine Development SAE Technical Paper 741206 1974 https://doi.org/10.4271/741206
  24. Khader , A.A. and Peters , B.D. 1982
  25. Han , Z. , Iyer , C.O. , Pascua , R.H.M. , VanDerWege , B.A. et al. 2004
  26. Stan , C. , Guenther , S. , Martorano , L. , and Tarantino , C. Aspects of Mixture Formation and Combustion in GDI Engines SAE Technical Paper 2000-01-0648 2000 https://doi.org/10.4271/2000-01-0648
  27. Kakuho , A. , Yamaguchi , K. , Hashizume , Y. , Urushihara , T. et al. A Study of Air-Fuel Mixture Formation in Direct-Injection SI Engines SAE Technical Paper 2004-01-1946 2004 https://doi.org/10.4271/2004-01-1946
  28. Karaya , Y. and Mallikarjuna , J.M. Effect of Piston Profile on Performance and Emission Characteristics of a GDI Engine with Split Injection Strategy—A CFD Study IOP Conf. Series: Materials Science and Engineering 243 2017 012024 https://doi.org/10.1088/1757-899X/243/1/012024
  29. Ortmann , R. , Arndt , S. , Raimann , J. , Grzeszik , R. et al. Methods and Analysis of Fuel Injection, Mixture Preparation and Charge Stratification in Different Direct Injected SI Engines SAE Technical Paper 2001-01-0970 2001 https://doi.org/10.4271/2001-01-0970
  30. Song , J. and Park , S. Effect of Injection Strategy on the Spray Development Process in a Single-Cylinder Optical GDI Engine At. Sprays 25 9 2015 819 836 https://doi.org/10.1615/AtomizSpr.2015012018
  31. Zeng , W. , Sjöberg , M. , and Reuss , D. Using PIV Measurements to Determine the Role of the In-Cylinder Flow Field for Stratified DISI Engine Combustion SAE Int. J. Engines 7 2 2014 615 632 https://doi.org/10.4271/2014-01-1237
  32. Sjöberg , M. , Zeng , W. , and Reuss , D. Role of Engine Speed and In-Cylinder Flow Field for Stratified and Well-Mixed DISI Engine Combustion Using E70 SAE Int. J. Engines 7 2 2014 642 655 https://doi.org/10.4271/2014-01-1241
  33. Zeng , W. and Sjöberg , M. Utilizing Boost and Double Injections for Enhanced Stratified-Charge Direct-Injection Spark-Ignition Engine Operation with Gasoline and E30 Fuels Int. J. Engine Res. 18 (1-2) 2017 131 142 https://doi.org/10.1177/1468087416685512
  34. Ding , C. , Vuilleumier , D. , Kim , N. , Reuss , D.L. et al. Effect of Engine Conditions and Injection Timing on Piston-Top Fuel Films for Stratified Direct-Injection Spark-Ignition Operation Using E30 Int. J. Engine Res. 21 2 2020 302 318 https://doi.org/10.1177/1468087419869785
  35. Zeng , W. , Sjöberg , M. , Reuss , D.L. , and Hu , Z. The Role of Spray-Enhanced Swirl Flow for Combustion Stabilization in a Stratified-Charge DISI Engine Combust. Flame 168 x 2016 166 185 https://doi.org/10.1016/j.combustflame.2016.03.015
  36. Zeng , W. , Sjöberg , M. , Reuss , D.L. , and Hu , Z. High-Speed PIV, Spray, Combustion Luminosity, and Infrared Fuel-Vapor Imaging for Probing Tumble-Flow-Induced Asymmetry of Gasoline Distribution in a Spray-Guided Stratified-Charge DISI Engine Proc. Combust. Inst. 36 3 2017 3459 3466 https://doi.org/10.1016/j.proci.2016.08.047
  37. Schumann , F. , Sarikoc , F. , Buri , S. , Kubach , H. et al. Potential of Spray-Guided Gasoline Direct Injection for Reduction of Fuel Consumption and Simultaneous Compliance with Stricter Emissions Regulations Int. J. Engine Res. 14 1 2013 80 91 https://doi.org/10.1177/1468087412451695
  38. Babayev , R. , Nyrenstedt , G. , and Johansson , B. Computational Study of a Multiple Fuel Injector Concept under High-Load and High-EGR Conditions SAE Int. J. Adv. & Curr. Prac. in Mobility 3 1 2020 171 186 https://doi.org/10.4271/2020-01-2034
  39. Ávila Jiménez , C.D. , Nyrenstedt , G. , Goyal , H. , Andersson , A. et al. Effects of Multiple Injectors on Spray Characteristics and Efficiency in Internal Combustion Engines SAE Technical Paper 2021-01-0501 2021 https://doi.org/10.4271/2021-01-0501
  40. Han , Z. and Reitz , R.D. Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models Combust. Sci. Technol. 106 4-6 1995 267 295 https://doi.org/10.1080/00102209508907782
  41. Liu , Y.-D. , Jia , M. , Xie , M.-Z. , and Pang , B. Enhancement on a Skeletal Kinetic Model for Primary Reference Fuel Oxidation by Using a Semidecoupling Methodology Energy & Fuels 26 12 2012 7069 7083 https://doi.org/10.1021/ef301242b
  42. Beale , J.C. and Reitz , R.D. Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model At. Sprays 9 6 1999 623 650 https://doi.org/10.1615/atomizspr.v9.i6.40
  43. Amsden , A.A. , O’Rourke , P.J. , and Butler , T.D. 1989 https://doi.org/10.2172/6228444
  44. Liu , A.B. , Mather , D. , and Reitz , R.D. Modeling the Effects of Drop Drag and Breakup on Fuel Sprays SAE Technical Paper 930072 1993 https://doi.org/10.4271/930072
  45. O’Rourke , P.J. 1981
  46. O’Rourke , P.J. and Amsden , A.A. A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model SAE Technical Paper 2000-01-0271 2000 https://doi.org/10.4271/2000-01-0271
  47. Jose , J.V. , Thakur , H. , Mittal , M. , and Ramesh , A. A Computational Study on the Effect of Injector Location on the Performance of a Small Spark-Ignition Engine Modified to Operate under the Direct-Injection Mode SAE Technical Paper 2020-01-0286 2020 https://doi.org/10.4271/2020-01-0286

Cited By