Open Access

Synergetic Application of Zero-, One-, and Three-Dimensional Computational Fluid Dynamics Approaches for Hydrogen-Fuelled Spark Ignition Engine Simulation

Journal Article
03-15-04-0030
ISSN: 1946-3936, e-ISSN: 1946-3944
Published December 02, 2021 by SAE International in United States
Synergetic Application of Zero-, One-, and Three-Dimensional
                    Computational Fluid Dynamics Approaches for Hydrogen-Fuelled Spark Ignition
                    Engine Simulation
Sector:
Citation: Millo, F., Piano, A., Rolando, L., Accurso, F. et al., "Synergetic Application of Zero-, One-, and Three-Dimensional Computational Fluid Dynamics Approaches for Hydrogen-Fuelled Spark Ignition Engine Simulation," SAE Int. J. Engines 15(4):561-580, 2022, https://doi.org/10.4271/03-15-04-0030.
Language: English

Abstract:

Nowadays hydrogen, especially if derived from biomass or produced by renewable power, is rising as a key energy solution to shift the mobility of the future toward a low-emission scenario. It is well known that hydrogen can be used with both internal combustion engines (ICEs) and fuel cells (FCs); however, hydrogen-fuelled ICE represents a robust and cost-efficient option to be quickly implemented under the current production infrastructure. In this framework, this article focuses on the conversion of a state-of-the-art 3.0L diesel engine in a hydrogen-fuelled Spark Ignition (SI) one. To preliminarily evaluate the potential of the converted ICE, a proper simulation methodology was defined combining zero-, one-, and three-dimensional (0D/1D/3D) Computational Fluid Dynamics (CFD) approaches. First of all, a detailed kinetic scheme was selected for both hydrogen combustion and Nitrogen Oxides (NOx) emission predictions in a 3D-CFD environment. Afterward, to bring the analysis to a system-level approach, a 1D-CFD predictive combustion model was firstly optimized by implementing a specific laminar flame speed correlation and, secondly, calibrated against the 3D-CFD combustion results. The combustion model was then integrated into a complete engine model to assess the potential benefit derived from the wide range of flammability and the high flame speed of hydrogen on a complete engine map, considering NOx formation and knock avoidance as priority parameters to control. Without a specific modification of turbocharger and combustion systems, a power density of 34 kW/L and a maximum brake thermal efficiency (BTE) of about 42% were achieved, thus paving the way for further hardware optimization (e.g., compression ratio reduction, turbocharger optimization, direct injection [DI]) to fully exploit the advantages enabled by hydrogen combustion.