Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Review of Additive Manufacturing for Internal Combustion Engine Components

Journal Article
03-13-05-0039
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/03-13-05-0039
Published September 09, 2020 by SAE International in United States
Review of Additive Manufacturing for Internal Combustion Engine Components
Sector:
Citation: Gray, J. and Depcik, C., "Review of Additive Manufacturing for Internal Combustion Engine Components," SAE Int. J. Engines 13(5):617-632, 2020, https://doi.org/10.4271/03-13-05-0039.
Language: English

References

  1. U.S. Energy Information Administration 2019 https://www.eia.gov/energyexplained/?page=us_energy_transportation
  2. Davis , S.C. , and Boundy , R.G. 2019
  3. Pagerit , S. , Sharer , P. , and Rousseau , A. Fuel Economy Sensitivity to Vehicle Mass for Advanced Vehicle Powertrains SAE Technical Paper 2006-01-0665 2006 https://doi.org/10.4271/2006-01-0665
  4. Anrico Casadei , R.B. , and Broda , R. 2008 https://www.h3xed.com/blogmedia/Ricardo_FE_MPG_Study.pdf
  5. National Research Council Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles Washington, DC The National Academies Press 2010 https://doi.org/10.17226/12845
  6. Goede , M. and Stehlin , M. Innovative Developments for Lightweight Vehicle Structures Conference Proceedings Wolfsburg, Germany Volkswagen AG 2009
  7. Beste , F. , Schöffmann , W. , and Marquard , R. Lightweight Design—A Challenge for Modern Passenger Car Engines SAE Technical Paper 2000-05-0051 2000
  8. Tharumarajah , A. , and Koltun , P. Is There an Environmental Advantage of Using Magnesium Components for Light-Weighting Cars? Journal of Cleaner Production 15 11 1007 1013 2017 https://doi.org/10.1016/j.jclepro.2006.05.022
  9. Luo , A.A. Magnesium: Current and Potential Automotive Applications JOM 54 2 42 48 2002 https://doi.org/10.1007/BF02701073
  10. SmarTech Publishing 2018 https://www.smartechanalysis.com/wp-content/uploads/2018/11/3dpbm-x-smartech-am-opportunities-in-automotive.pdf
  11. Gibson , I. , Rosen , D. , and Stucker , B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing Second New York Springer-Verlag New York 2015 https://doi.org/10.1007/978-1-4419-1120-9
  12. ASTM International 2015 https://doi.org/10.1520/ISOASTM52900-15
  13. Zhang , Y. , Wu , L. , Guo , X. , Kane , S. et al. Additive Manufacturing of Metallic Materials: A Review Journal of Materials Engineering and Performance 27 1 1 13 2018 https://doi.org/10.1007/s11665-017-2747-y
  14. Ngo , T.D. , Kashani , A. , Imbalzano , G. , Nguyen , K.T.Q. et al. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges Composites Part B: Engineering 143 172 196 2018 https://doi.org/10.1016/j.compositesb.2018.02.012
  15. Körner , C. Additive Manufacturing of Metallic Components by Selective Electron Beam Melting-A Review International Materials Reviews 61 5 361 377 2016 https://doi.org/10.1080/09506608.2016.1176289
  16. Moridi , A. , Hassani-Gangaraj , S.M. , Guagliano , M. , and Dao , M. Cold Spray Coating: Review of Material Systems and Future Perspectives Surface Engineering 30 6 369 395 2014 https://doi.org/10.1179/1743294414Y.0000000270
  17. Suzuki , K. , and Kikuchi , N. A Homogenization Method for Shape and Topology Optimization Computer Methods in Applied Mechanics and Engineering 93 3 291 318 1991 https://doi.org/10.1016/0045-7825(91)90245-2
  18. Marchesi , T.R. , Lahuerta , R.D. , Silva , E.C.N. , Tsuzuki , M.S.G. et al. Topologically Optimized Diesel Engine Support Manufactured with Additive Manufacturing IFAC-PapersOnLine 48 3 2333 2338 2015 https://doi.org/10.1016/j.ifacol.2015.06.436
  19. Thompson , M.K. , Moroni , G. , Vaneker , T. , Fadel , G. et al. Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints CIRP Annals 65 2 737 760 2016 https://doi.org/10.1016/j.cirp.2016.05.004
  20. Barbieri , S. , Giacopini , M. , Mangeruga , V. , and Mantovani , S. Design of an Additive Manufactured Steel Piston for a High Performance Engine: Developing of a Numerical Methodology Based on Topology Optimization Techniques SAE Int. J. Engines 11 6 1139 1150 2018 https://doi.org/10.4271/2018-01-1385
  21. Reyes Belmonte , M. , Copeland , C. , Hislop , D. , Hopkins , G. et al. Improving Heat Transfer and Reducing Mass in a Gasoline Piston Using Additive Manufacturing SAE Technical Paper 2015-01-0505 2015 https://doi.org/10.4271/2015-01-0505
  22. Hopf , A. , Bartsch , G. , Krämer , F. , and Weber , C. CFD Topology and Shape Optimization for Port Development of Integrated Exhaust Manifolds SAE Technical Paper 2017-01-1339 2017 https://doi.org/10.4271/2017-01-1339
  23. Orquéra , M. , Campocasso , S. , and Millet , D. Design for Additive Manufacturing Method for a Mechanical System Downsizing Procedia CIRP 60 223 228 2017 https://doi.org/10.1016/j.procir.2017.02.011
  24. Guo , N. , and Leu , M.C. Additive Manufacturing: Technology, Applications and Research Needs Frontiers of Mechanical Engineering 8 3 215 243 2013 https://doi.org/10.1007/s11465-013-0248-8
  25. Stratasys 2016 https://www.stratasys.com/-/media/files/case-studies/automotive/cs_fdm_au_ducati_en_0915.pdf
  26. Goldsberry , C. 2014 https://www.plasticstoday.com/content/ford-3d-printed-auto-parts-save-millions-boost-quality/97214356120060
  27. Haba , S.A. , and Oancea , G. Digital Manufacturing of Air-Cooled Single-Cylinder Engine Block The International Journal of Advanced Manufacturing Technology 80 5 747 759 2015 https://doi.org/10.1007/s00170-015-7038-x
  28. Guarato , A. , Ticona , E. , and Braga , S. Development of a Flex-Fuel Rotary Engine with Variable Compression Ratio SAE Technical Paper 2016-36-0218 2016 https://doi.org/10.4271/2016-36-0218
  29. Han , T. , Zhen , H. , and Mainelis , G. Evaluation of Electrostatic Screen Battery for Emissions Control (ESBEC) with Diesel Emissions SAE Int. J. Engines 9 4 2312 2319 2016 https://doi.org/10.4271/2016-01-9047
  30. Agarwal , A. , Lath , U. , Bhardwaj , S. , Gopal , K. et al. Design and Development of a Restricted Intake Manifold for a Naturally Aspirated Four Cylinder SI Engine SAE Technical Paper 2018-28-0056 2018 https://doi.org/10.4271/2018-28-0056
  31. Moura , T. , Cavaglieri , M. , and Santos , R. Pressure Drop on Rapid Prototyping and Final Product Intake Manifolds SAE Technical Paper 2009-36-0322 2009 https://doi.org/10.4271/2009-36-0322
  32. Dieter , G. , and Schmidt , L. Engineering Design Fifth New York McGraw-Hill 2013
  33. Weller , C. , Kleer , R. , and Piller , F.T. Economic Implications of 3D Printing: Market Structure Models in Light of Additive Manufacturing Revisited International Journal of Production Economics 164 43 56 2015 https://doi.org/10.1016/j.ijpe.2015.02.020
  34. Berglung , A. and Grimheden , M. The Importance of Prototyping for Education in Product Innovation Engineering ICORD 11: Proceedings of the 3rd International Conference on Research into Design Engineering Chakrabarti , A. Bangalore, India 2011
  35. Juvanovic , V.M. , Bilgen , O. , Arcaute , K. , Audette , M.A. , et al. Active Duty Training for Support of Navy’s Additive Manufacturing Strategy 2017 ASEE Annual Conference and Exposition Columbus, OH 2017
  36. Suzuki , M. , Ogawa , Y. , Kawano , A. , Hagiwara , A. et al. Rapid Prototyping of Temporal Bone for Surgical Training and Medical Education Acta Oto-Laryngologica 124 4 400 402 2004 https://doi.org/10.1080/00016480410016478
  37. Müller , B. , Hund , R. , Malek , R. , and Gerth , N. Laser Beam Melting for Tooling Applications-New Perspectives for Resource-Efficient Metal Forming and Die Casting Processes Kovács , G.L. and Kochan , D. Digital Product and Process Development Systems. NEW PROLAMAT 2013. IFIP Advances in Information and Communication Technology 411 Berlin, Heidelberg Springer 2013 https://doi.org/10.1007/978-3-642-41329-2_14
  38. Maki , C. , Byrd , K. , McKeough , B. , Rentschler , R. et al. MMLV: Aluminum Cylinder Block with Bulkhead Inserts and Aluminum Alloy Connecting Rod SAE Technical Paper 2015-01-1238 2015 https://doi.org/10.4271/2015-01-1238
  39. Rochussen , J. , Son , J. , Yeo , J. , Khosravi , M. et al. Development of a Research-Oriented Cylinder Head with Modular Injector Mounting and Access for Multiple In-Cylinder Diagnostics SAE Technical Paper 2017-24-0044 2017 https://doi.org/10.4271/2017-24-0044
  40. Conner , B.P. , Manogharan , G.P. , Martof , A.N. , Rodomsky , L.M. et al. Making Sense of 3-D Printing: Creating a Map of Additive Manufacturing Products and Services Additive Manufacturing 1-4 64 76 2014 https://doi.org/10.1016/j.addma.2014.08.005
  41. Agapovichev , A. , Balaykin , A. , and Smelov , V.G. Production Technology of the Internal Combustion Engine Crankcase Using Additive Technologies Modern Applied Science 9 4 335 343 2015 https://doi.org/10.5539/mas.v9n4p335
  42. Gebhardt , A. Understanding Additive Manufacturing: Rapid Prototyping - Rapid Tooling - Rapid Manufacturing Munich, Germany Carl Hanser Verlag 2012 https://doi.org/10.3139/9783446431621
  43. Rosochowski , A. , and Matuszak , A. Rapid Tooling: The State of the Art Journal of Materials Processing Technology 106 191 198 2000 https://doi.org/10.1016/S0924-0136(00)00613-0
  44. Bassoli , E. , Gatto , A. , Iuliano , L. , and Grazia Violante , M. 3D Printing Technique Applied to Rapid Casting Rapid Prototyping Journal 13 3 148 155 2007 https://doi.org/10.1108/13552540710750898
  45. Attaran , M. The Rise of 3-D Printing: The Advantages of Additive Manufacturing over Traditional Manufacturing Business Horizons 60 5 677 688 2017 https://doi.org/10.1016/j.bushor.2017.05.011
  46. Ilardo , R. , and Williams , C.B. Design and Manufacture of a Formula SAE Intake System Using Fused Deposition Modeling and Fiber-Reinforced Composite Materials Rapid Prototyping Journal 16 3 174 179 2010 https://doi.org/10.1108/13552541011034834
  47. Johnson , M. , and Scott Goldsborough , S. A Small-Scale Flow Rig for Swirl Studies of a Single-Valve, Reverse Uniflow 2S Engine SAE Technical Paper 2008-01-0609 2008 https://doi.org/10.4271/2008-01-0609
  48. Schlier , L. , Zhang , W. , Travitzky , N. , Greil , P. et al. Macro-Cellular Silicon Carbide Reactors for Nonstationary Combustion under Piston Engine-Like Conditions International Journal of Applied Ceramic Technology 8 5 1237 1245 2011 https://doi.org/10.1111/j.1744-7402.2010.02591.x
  49. Baudana , G. , Biaminoa , S. , Klöden , B. , Kirchner , A. et al. Electron Beam Melting of Ti-48Al-2Nb-0.7Cr-0.3Si: Feasibility Investigation Intermetallics 73 43 49 2016 https://doi.org/10.1016/j.intermet.2016.03.001.49
  50. Kass , M. , Noakes , M. , Kaul , B. , Edwards , D. et al. Experimental Evaluation of a 4-cc Glow-Ignition Single-Cylinder Two-Stroke Engine SAE Technical Paper 2014-01-1673 2014 https://doi.org/10.4271/2014-01-1673
  51. Cooper , D. , Thornby , J. , Blundell , N. , Henrys , R. et al. Design and Manufacture of High Performance Hollow Engine Valves by Additive Layer Manufacturing Materials & Design 69 44 55 2015 https://doi.org/10.1016/j.matdes.2014.11.017
  52. Renault Trucks Corporate 2017 https://corporate.renault-trucks.com/en/press-releases/metal-3d-printing-technology-of-the-future-for-lighter-and-more-compact-engines.html
  53. Metal AM 2016 http://www.metal-am.com/fully-functional-additively-manufactured-automotive-cylinder-block-produced-volkswagen/
  54. Metal AM 2018 http://www.metal-am.com/volkswagen-identifies-key-areas-metal-additive-manufacturing-automotive-applications/
  55. Fuges , C.M. 2018 https://www.additivemanufacturing.media/articles/roush-uses-engine-cylinder-head-to-prove-out-additive-manufacturing
  56. Koenigsegg Automotive AB 2019 https://www.koenigsegg.com/car/one1/
  57. Desktop Metal 2018 https://tech-labs.com/sites/default/files/DesktopMetal_Lumenium-Case-Study.pdf
  58. ConceptLaser 2017 https://www.objective3d.com.au/wp-content/uploads/2016/11/Application-Guide-Automotive.pdf
  59. Papyrin , A. , Kosarev , V. , Klinkov , S. , Alkhimov , A. et al. Cold Spray Technology Amsterdam Elsevier Science 2007 https://doi.org/10.1016/B978-0-08-045155-8.X5000-5
  60. Ford , S. , and Despeisse , M. Additive Manufacturing and Sustainability: An Exploratory Study of the Advantages and Challenges Journal of Cleaner Production 137 1573 1587 2016 https://doi.org/10.1016/j.jclepro.2016.04.150
  61. Wilson , J.M. , Piya , C. , Shin , Y.C. , Zhao , F. et al. Remanufacturing of Turbine Blades by Laser Direct Deposition with Its Energy and Environmental Impact Analysis Journal of Cleaner Production 80 170 178 2014 https://doi.org/10.1016/j.jclepro.2014.05.084
  62. Patki , A. Design for Remanufacturing: The Requirement for Today and Tomorrow SAE Technical Paper 2016-01-8137 2016 https://doi.org/10.4271/2016-01-8137
  63. Kumar , S. , and Yamaoka , T. System Dynamics Study of the Japanese Automotive Industry Closed Loop Supply Chain Journal of Manufacturing Technology Management 18 2 115 138 2007 https://doi.org/10.1108/17410380710722854
  64. Matsumoto , M. , Yang , S. , Martinsen , K. , and Kainuma , Y. Trends and Research Challenges in Remanufacturing International Journal of Precision Engineering and Manufacturing-Green Technology 3 1 129 142 2016 https://doi.org/10.1007/s40684-016-0016-4

Cited By