Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

An Improved Physics-Based Combustion Modeling Approach for Control of Direct Injection Diesel Engines

Journal Article
03-13-04-0030
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/03-13-04-0030
Published July 01, 2020 by SAE International in United States
An Improved Physics-Based Combustion Modeling Approach for Control of Direct Injection Diesel Engines
Sector:
Citation: Samuel, J. and Ramesh, A., "An Improved Physics-Based Combustion Modeling Approach for Control of Direct Injection Diesel Engines," SAE Int. J. Engines 13(4):457-472, 2020, https://doi.org/10.4271/03-13-04-0030.
Language: English

References

  1. Makowicki , T. , Bitzer , M.G.S. , and Graichen , K. Cycle-by-Cycle Optimization of the Combustion during Transient Engine Operation IFAC-PapersOnLine 50 1 11046 11051 2017
  2. Takahashi , M. , Yamasaki , Y. , Kaneko , S. , Fujii , S. et al. Model-Based Control System for Advanced Diesel Combustion IFAC-PapersOnLine 52 5 171 177 2019
  3. Moreno Carlos , J. , Ola , S. , and Per , T. In-Cycle Closed-Loop Combustion Control with Pilot-Main Injections for Maximum Indicated Efficiency IFAC-PapersOnLine 51 31 92 98 2018
  4. Song , Z. , Zhang , X. , Zhang , J. , and Cao , J. Predicting the Heat Release Rate of Ion Current Combustion Process Fuelled with Hydrogen/Carbon Dioxide and Natural Gas Journal of Energy Engineering 145 1 04018068 2019
  5. Liu , Y. , Deng , J. , Hu , Z. , and Li , L. In-Cycle Combustion Feedback Control for Abnormal Combustion Based on Digital Ion Current Signal International Journal for Engine Research 19 2 241 249 2017
  6. Wick , M. , Lehrheuer , B. , Albin , T. , Andert , J. , and Pischinger , S. Decoupling of Consecutive Gasoline Controlled Auto-Ignition Combustion Cycles by Field Programmable Gate Array Based Real-Time Cylinder Pressure Analysis International Journal of Engine Research 19 2 153 167 2017
  7. Samuel , J. , Mithun , S. , Panda , K. , Ramesh , A. et al. Experimental Investigations on the Influence of Valve Timing and Multi-Pulse Injection on GCAI Combustion SAE Technical Paper 2019-01-0967 2019 https://doi.org/10.4271/2019-01-0967
  8. Lahti , J. L. and Moskwa , J. J. Engine Control Using Estimated Parameters From a Real Time Model of an Engine With Variable Valve Actuation ASME 2005 International Mechanical Engineering Congress and Exposition Florida 2005
  9. Men , Y. and Zhu , G. G. A Multi-Zone Reaction-Based Diesel Combustion Model for Model-Based Control ASME 2017 Dynamic Systems and Control Conference Virginia 2017
  10. Ritter , D. , Andert , J. , Abel , D. , and Albin , T. Model-Based Control of Gasoline-Controlled Auto-Ignition International Journal of Engine Research 19 2 189 201 2017
  11. Yamasaki , Y. , Ikemura , R. , and Kaneko , S. Model-Based Control of Diesel Engines with Multiple Fuel Injections International Journal of Engine Research 19 2 257 265 2018
  12. Jensen Samuel , J. , Paul Pramod , M. , Anand , M. T. , and Ramesh , A. On the Suitability of Existing Models for Predicting Ignition Delay in Direct Injection Diesel Engines That Use Multiple Injections 25th National Conference on Internal Combustion Engines and Combustion (NCICEC) Surathkal, India
  13. Jensen Samuel , J. and Ramesh , A. A Physics-Based Model for Real-Time Prediction of Ignition Delays of Multi-Pulse Fuel Injections in Direct-Injection Diesel Engines International Journal of Engine Research 21 3 540 558 2018
  14. Watson , N. , Pilley , A.D. , and Marzouk , M. A Combustion Correlation for Diesel Engine Simulation SAE Technical Paper 800029 1980 https://doi.org/10.4271/800029
  15. Lakshminarayanan , P.A. , Aghav , Y.V. , Dani , A.D. , and Mehta , P.S. Accurate Prediction of the Rate of Heat Release in a Modern Direct Injection Diesel Engine Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 216 8 663 675 2002
  16. Vibe , I. Semi-Empirical Expression for Combustion Rate in Engines Procedings of the Conference on Piston Engines Moscow 1956
  17. Ponti , F. , Serra , G. and Siviero , C. A Phenomenological Combustion Model for Common Rail Multi-Jet Diesel Engine ASME 2004 Internal Combustion Engine Division Fall Technical Conference California 2004
  18. Whitehouse , N.D. , Clough , E. , and Way , J.B. The Effect of Changes in Design and Operating Conditions on Heat Release in Direct-Injection Diesel Engines SAE Technical Paper 740085 1974 https://doi.org/10.4271/740085
  19. Dent , J. C. and Mehta , P. S. Phenomenological Combustion Model for a Quiescent Chamber Diesel Engine Fuels & Lubricants Meeting Tulsa, Oklahoma 1981
  20. Hiroyasu , H. , Kadota , T. , and Arai , M. Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions (Part 1: Combustion Modelling) Bulletein of the JSME 26 214 569 575 1983
  21. Ledger , J.D. and Walmsley , S. Computer Simulation of a Turbocharged Diesel Engine Operating Under Transient Load Conditions SAE Technical Paper 710177 1971 https://doi.org/10.4271/710177
  22. Ledger , J.D. , Benson , R.S. , and Whitehouse , N.D. Dynamic Modeling of a Turbocharged Diesel Engine Engine Performance Modeling London Institution of Mechanical Engineers 1972
  23. Benson , R.S. , Ledger , J.D. , Whitehouse , N.D. , and Walmsley , S. Comparison of Experimental and Simulated Transient Responses of a Turbocharged Diesel Engine SAE Technical Paper 730666 1973 https://doi.org/10.4271/730666
  24. Jensen , J.P. , Kristensen , A.F. , Sorensen , S.C. , Houbak , N. , and Hendricks , E. Mean Value Modeling of a Small Turbocharged Diesel Engine SAE Technical Paper 910070 1991 https://doi.org/10.4271/910070
  25. Horlock , J.H. and Winterbone , D.E. The Thermodynamics and Gas Dynamics of Internal Combustion Engines II Oxford Clarendon Press 1986
  26. Catania , A.E. , Finesso , R. , and Spessa , E. Predictive Zero-Dimensional Combustion Model for DI Diesel Engine Feed-Forward Control Energy Conversion and Management 52 10 3159 3175 2011
  27. Finesso , R. , Spessa , E. , and Yang , Y. Development and Validation of a Real-Time Model for the Simulation of the Heat Release Rate, In-Cylinder Pressure and Pollutant Emissions in Diesel Engines SAE Int. J. Engines 9 1 322 341 2016 https://doi.org/10.4271/2015-01-9044
  28. Spessa , E. , D'Ambrosio , S. , Iemmolo , D. , Mancarella , A. et al. Steady-State and Transient Operations of a Euro VI 3.0L HD Diesel Engine with Innovative Model-Based and Pressure-Based Combustion Control Techniques SAE Int. J. Engines 10 3 1080 1092 2017 https://doi.org/10.4271/2017-01-0695
  29. Finesso , R. , Marello , O. , Misul , D. , Spessa , E. et al. Development and Assessment of Pressure-Based and Model-Based Techniques for the MFB50 Control of a Euro VI 3.0L Diesel Engine SAE Int. J. Engines 10 4 1538 1555 2017 https://doi.org/10.4271/2017-01-0794
  30. Yasuda , K. , Yamasaki , Y. , Kaneko , S. , Nakamura , Y. et al. Diesel Combustion Model for on-Board Application International Journal of engine research 17 7 748 765 2016
  31. Chmela , F.G. and Orthaber , G.C. Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion International Congress & Exposition , Michigan 108 152 160 1999
  32. Jaipuria , A. and Lakshminarayanan , P.A. Prediction of the Rate of Heat Release of Mixing-Controlled Combustion in a Common-Rail Engine with Pilot and Post Injections Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 225 2 246 259 2011
  33. Siebers , D.L. Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization Journal of Engines 108 3 703 728 1999
  34. Godsave , G.A.E. Studies of the Combustion of Drops in a Fuel Spray - The Burning of Single Drops of Fuel Symposium (International) on Combustion 4 1 818 830 1953
  35. Spalding , D.B. The Combustion of Liquid Fuels Symposium (International) on Combustion 4 1 847 864 1953
  36. Siebers , D.L. Liquid-Phase Fuel Penetration in Diesel Sprays SAE Technical Paper 980809 1998 https://doi.org/10.4271/980809
  37. Sauter , J. Die Grössenbestimmung der in Gemischnebeln von Verbrennungskraftmaschinen vorhandenen Brennstoffteilchen VDI-Forschungsheft 279 312 1928
  38. Jensen Samuel , J. , Paul Pramod , M. , Ramesh , A. , Anand , M.T. et al. Development and Demonstration of Control Strategies for a Common Rail Direct Defence Science Journal 67 4 382 389 2017
  39. Jensen Samuel , J. , Paul Pramod , M. , Ramesh , A. , Anand , M.T. et al. Development of a Fuel Quantity-based Engine Control Unit Software Architecture Defence Science Journal 69 3 203 207 2019
  40. Fattah , I.M.R. , Yip , H.L. , Jiang , Z. , Yuen , A.C.Y. et al. Effects of Flame-Plane Wall Impingement on Diesel Combustion and Soot Processes Fuel 255 115726 2019
  41. Du , W. , Zhang , Q. , Bao , W. , and Lou , J. Effects of Injection Pressure on Spray Structure after Wall Impingement Applied Thermal Engineering 129 1212 1218 2018
  42. Naber , J.D. and Reitz , R.D. Modeling Engine Spray/Wall Impingement SAE Technical Paper 880107 1988 https://doi.org/10.4271/880107
  43. Ma , T. , Feng , L. , Wang , H. , Liu , H. , and Yao , M. A Numerical Study of Spray/Wall Impingement Based on Droplet Impact Phenomenon International Journal of Heat and Mass Transfer 112 401 412 2017
  44. Samuel , J.J. and Ramesh , A. Transient Prediction Capabilities of a Novel Physics-Based Ignition Delay Model in Multi-Pulsed Direct Injection Diesel Engines International Journal of Engine Research 2019 https://doi.org/10.1177/1468087419866590

Cited By