This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental Analysis of Gasoline Direct Injector Tip Wetting

Journal Article
03-13-01-0006
ISSN: 1946-3936, e-ISSN: 1946-3944
Published October 14, 2019 by SAE International in United States
Experimental Analysis of Gasoline Direct Injector Tip Wetting
Sector:
Citation: Backes, F., Blochum, S., Härtl, M., and Wachtmeister, G., "Experimental Analysis of Gasoline Direct Injector Tip Wetting," SAE Int. J. Engines 13(1):77-91, 2020, https://doi.org/10.4271/03-13-01-0006.
Language: English

References

  1. Pischinger , F. , Schulte , H. , and Jansen , J. Grundlagen und Entwicklungslinien der Dieselmotorischen Brennverfahren VDI-Bericht 714 61 93 1988
  2. Wiese , W. , Kufferath , A. , Storch , A. , and Rogler , P. Requirements for Multi-hole Injectors in GDI Engines to Meet Future Emission Legislation 2nd International Engine Congress Baden-Baden, Germany 2015
  3. Miklautschitsch , M. , Durst , B. , Gierl , R. , Rubbert , S. et al. Experimentelle Untersuchung der Partikelentstehung im BMW TwinPower Turbo Motor durch simultanen Einsatz von Hochgeschwindigkeits-Endoskopie und Lichtleiterzündkerze 12th International Symposium on Combustion Diagnostics Baden-Baden, Germany 2016
  4. Peterson , K. , Grover , R. , and Mitcham , C. Application of Optical Diagnostics and Simulation to Fuel Injector Tip Wetting and Soot Production 11th International Symposium on Combustion Diagnostics Baden-Baden, Germany 2014
  5. Berndorfer , A. , Breuer , S. , Piock , W. , and Von Bacho , P. Diffusion Combustion Phenomena in GDi Engines Caused by Injection Process SAE Technical Paper 2013-01-0261 2013 10.4271/2013-01-0261
  6. Dageförde , H. , Kiefer , A. , Samenfink , W. , Wiese , W. et al. Requirements for Spray and Tip Design of a Multi-hole Injector for DISI Engines ICLASS 2015, 13th Triennial International Conference on Liquid Atomization and Spray Systems Tainan, Taiwan Aug. 23-27 2015
  7. Zhang , H. , Achleitner , E. , Jovovic , D. , Kull , E. et al. Herausforderungen an die Benzindirekteinspritzsysteme zur Einhaltung der EU6c Abgasgrenzwerte 9. Tagung Diesel- und Benzindirekteinspritzung Berlin, Germany 2014
  8. Piock , W.F. , Befrui , B. , Berndorfer , A. , and Hoffmann , G. Fuel Pressure and Charge Motion Effects on GDi Engine Particulate Emissions SAE Int. J. Engines 8 2 464 473 2015 10.4271/2015-01-0746
  9. Oh , H. , Lee , J. , Han , S. , Park , C. et al. Effect of Injector Nozzle Hole Geometry on Particulate Emissions in a Downsized Direct Injection Gasoline Engine SAE Technical Paper 2017-24-0111 2017 10.4271/2017-24-0111
  10. Reitz , R.D. A Photographic Study of Flash-Boiling Atomization Aerosol Science and Technology 12 3 561 569 2007 10.1080/02786829008959370
  11. Sher , E. , Bar-Kohany , T. , and Rashkovan , A. Flash-Boiling Atomization Progress in Energy and Combustion Science 34 4 417 439 2008 10.1016/j.pecs.2007.05.001
  12. Kamoun , H. , Lamanna , G. , Weigand , B. , and Steelant , J. High-Speed Shadowgraphy Investigations of Superheated Liquid Jet Atomisation ILASS-Americas 22nd Annual Conference on Liquid Atomization and Spray Systems Cincinnati, OH 2010
  13. Oza , R.D. On the Mechanism of Flashing Injection of Initially Subcooled Fuels J. Fluids Eng. 106 1 105 1984 10.1115/1.3242383
  14. Bar-Kohany , T. and Levy , M. State of the Art Review of Flash-Boiling Atomization Atomization and Sprays 26 12 1259 1305 2016 10.1615/AtomizSpr.2016015626
  15. Günther , A. and Wirth , K.-E. Evaporation Phenomena in Superheated Atomization and Its Impact on the Generated Spray International Journal of Heat and Mass Transfer 64 952 965 2013 10.1016/j.ijheatmasstransfer.2013.05.034
  16. Mojtabi , M. , Wigley , G. , and Helie , J. The Effect of Flash Boiling on the Atomization Performance of Gasoline Direct Injection Multistream Injectors Atomization and Sprays 24 6 467 493 2014 10.1615/AtomizSpr.2014008296
  17. Aleiferis , P.G. , Serras-Pereira , J. , Augoye , A. , Davies , T.J. et al. Effect of Fuel Temperature on In-Nozzle Cavitation and Spray Formation of Liquid Hydrocarbons and Alcohols from a Real-Size Optical Injector for Direct-Injection Spark-Ignition Engines International Journal of Heat and Mass Transfer 53 21-22 4588 4606 2010 10.1016/j.ijheatmasstransfer.2010.06.033
  18. Weber , D. 2016
  19. Wu , S. , Xu , M. , Hung , D.L.S. , and Pan , H. In-Nozzle Flow Investigation of Flash Boiling Fuel Sprays Applied Thermal Engineering 117 644 651 2017 10.1016/j.applthermaleng.2016.12.105
  20. Dahlander , P. , Lindgren , R. , and Denbratt , I. High-Speed Photography and Phase Doppler Anemometry Measurements of Flash-Boiling Multi-Hole Injector Sprays for Spray-Guided Gasoline Direct Injection 10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006 Kyoto, Japan Aug. 27-Sept. 1 2006 2006
  21. Guo , H. , Ma , X. , Li , Y. , Liang , S. et al. Effect of Flash Boiling on Microscopic and Macroscopic Spray Characteristics in Optical GDI Engine Fuel 190 79 89 2017 10.1016/j.fuel.2016.11.043
  22. Aleiferis , P.G. and van Romunde , Z.R. An Analysis of Spray Development with Iso-Octane, n-Pentane, Gasoline, Ethanol and n-Butanol from a Multi-Hole Injector under Hot Fuel Conditions Fuel 105 143 168 2013 10.1016/j.fuel.2012.07.044
  23. Kawano , D. , Ishii , H. , Suzuki , H. , Goto , Y. et al. Numerical Study on Flash-Boiling Spray of Multicomponent Fuel Heat Transfer - Asian Research 35 5 369 385 2006 10.1002/htj.20117
  24. Shen , S. , Jia , M. , Wang , T. , Lü , Q. et al. Measurement of the Droplets Sizes of a Flash Boiling Spray Using an Improved Extended Glare Point Velocimetry and Sizing Experiments in Fluids 57 4 143 2016 10.1007/s00348-016-2147-3
  25. Zeng , W. , Xu , M. , Zhang , G. , Zhang , Y. et al. Atomization and Vaporization for Flash-Boiling Multi-Hole Sprays with Alcohol Fuels Fuel 95 287 297 2012 10.1016/j.fuel.2011.08.048
  26. Xu , M. , Zhang , Y. , Zeng , W. , Zhang , G. et al. Flash Boiling: Easy and Better Way to Generate Ideal Sprays than the High Injection Pressure SAE Int. J. Fuels Lubr. 6 1 137 148 2013 10.4271/2013-01-1614
  27. Serras-Pereira , J. , van Romunde , Z. , Aleiferis , P.G. , Richardson , D. et al. Cavitation, Primary Break-Up and Flash Boiling of Gasoline, Iso-Octane and n-Pentane with a Real-Size Optical Direct-Injection Nozzle Fuel 89 9 2592 2607 2010 10.1016/j.fuel.2010.03.030
  28. Matsumura , E. , Senda , J. , Imori , K. , and Sakai , Y. Experimental Investigation of Superheated Fuel Spray Characteristics for D.I.S.I Engines SAE Technical Paper 2017-01-0820 2017 10.4271/2017-01-0820
  29. Lamanna , G. , Kamoun , H. , Weigand , B. , and Steelant , J. Towards a Unified Treatment of Fully Flashing Sprays International Journal of Multiphase Flow 58 168 184 2014 10.1016/j.ijmultiphaseflow.2013.08.010
  30. Krämer , M. , Kull , E. , and Wensing , M. Flashboiling-Induced Targeting Changes in Gasoline Direct Injection Sprays International Journal of Engine Research 17 1 97 107 2016 10.1177/1468087415604763
  31. Li , Y. , Guo , H. , Ma , X. , Qi , Y. et al. Morphology Analysis on Multi-Jet Flash-Boiling Sprays under Wide Ambient Pressures Fuel 211 38 47 2018 10.1016/j.fuel.2017.08.082
  32. Parrish , S.E. , Zink , R.J. , Sivathanu , Y. , and Lim , J. Spray Patternation of a Multi-Hole Injector Utilizing Planar Line-of-Sight Extinction Tomography ILASS Americas, 22nd Annual Conference on Liquid Atomization and Spray Systems Cincinnati, Ohio May 16-19 2010
  33. Zhang , G. , Xu , M. , Zhang , Y. , Zhang , M. et al. Macroscopic Characterization of Flash-Boiling Multihole Sprays Using Planar Laser-Induced Exciplex Fluorescence. Part II: Cross-Sectional Spray Structure Atomization and Sprays 23 3 265 278 2013 10.1615/AtomizSpr.2013007450
  34. Wood , A. , Wigley , G. , and Helie , J. Flash Boiling Sprays Produced by a 6-Hole GDI Injector 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal July 7-10 2014
  35. Yang , S. , Song , Z. , Wang , T. , and Yao , Z. An Experiment Study on Phenomenon and Mechanism of Flash Boiling Spray from a Multi-Hole Gasoline Direct Injector Atomization and Sprays 23 5 379 399 2013 10.1615/AtomizSpr.2013007539
  36. Zigan , L. , Shi , J.-M. , Krotow , I. , Schmitz , I. et al. Fuel Property and Fuel Temperature Effects on Internal Nozzle Flow, Atomization and Cyclic Spray Fluctuations of a Direct Injection Spark Ignition-Injector International Journal of Engine Research 14 6 543 556 2013 10.1177/1468087413482320
  37. Chen , Y. and Zhang , Z. Mechanism of Flash Boiling and Spray Analysis with Gasoline, Iso-Octane, n-Pentane and Ethanol from a Novel Heated Tip GDI Injector Applied Thermal Engineering 115 1109 1117 2017 10.1016/j.applthermaleng.2016.12.101
  38. Araneo , L. and Donde’ , R. Flash Boiling in a Multihole G-DI Injector - Effects of the Fuel Distillation Curve Fuel 191 500 510 2017 10.1016/j.fuel.2016.11.104
  39. Aori , G. , Hung , D.L.S. , Zhang , M. , Zhang , G. et al. Effect of Nozzle Configuration on Macroscopic Spray Characteristics of Multi-Hole Fuel Injectors under Superheated Conditions Atomization and Sprays 26 5 439 462 2016 10.1615/AtomizSpr.2015011990
  40. Wetzel , J. Optical Analysis of the Influence of Injector Hole Geometry on Mixture Formation in Gasoline Direct Injection Engines Automotive and Engine Technology 1 1-4 57 67 2016 10.1007/s41104-016-0005-1
  41. Schauer , F.X. , Zimmer , T. , Bachhuber , M. , Scheller , M. et al. Development of a Model-Based HCCI Control Strategy for an Engine with a Fully Variable Valve Train SAE Technical Paper 2013-01-1667 2013 10.4271/2013-01-1667
  42. Peer , J. , Backes , F. , Sauerland , H. , Härtl , M. et al. Development of a High Turbulence, Low Particle Number, High Injection Pressure Gasoline Direct Injection Combustion System SAE Int. J. Engines 9 4 2301 2311 2016 10.4271/2016-01-9046
  43. Baldwin String Flash-Boiling in Flashing and Non-Flashing Gasoline Direct Injection Simulations with Transient Needle Motion ILASS Americas 28th Annual Conference on Liquid Atomization and Spray Systems Dearborn, MI 2016
  44. Frenzel , H. , Achleitner , E. , Krüger , G. , Rösel , G. et al. Direkteinspritzsysteme für Ottomotoren zur Erfüllung der Real Driving Emission 10. Tagung Diesel- und Benzindirekteinspritzung Berlin, Germany 2016 281 299

Cited By