Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Complete Engine Thermal Model, a Comprehensive Approach

Journal Article
03-11-02-0009
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/03-11-02-0009
Published April 18, 2018 by SAE International in United States
Complete Engine Thermal Model, a Comprehensive Approach
Sector:
Citation: Bovo, M., "Complete Engine Thermal Model, a Comprehensive Approach," SAE Int. J. Engines 11(2):127-146, 2018, https://doi.org/10.4271/03-11-02-0009.
Language: English

References

  1. Payri , F. , Olmeda , P. , Martin , J. , and Carreño , R. A New Tool to Perform Global Energy Balances in DI Diesel Engines SAE Int. J. Engines 7 1 43 59 2014 10.4271/2014-01-0665
  2. Smith , L. , Preston , W. , Dowd , G. , Taylor , O. et al. Application of a First Law Heat Balance Method to a Turbocharged Automotive Diesel Engine SAE Technical Paper 2009-01-2744 2009 10.4271/2009-01-2744
  3. Donn , C. , Zulehner , W. , Ghebru , D. , Spicher , U. et al. Experimental Heat Flux Analysis of an Automotive Diesel Engine in Steady-State Operation and During Warm-Up SAE Technical Paper 2011-24-0067 2011 10.4271/2011-24-0067
  4. Bovo , M. and Somhorst , J. A High Resolution 3D Complete Engine Heat Balance Model SAE Technical Paper 2015-24-2533 2015 10.4271/2015-24-2533
  5. Romero , C. , Torregrosa , A. , Olmeda , P. , and Martin , J. Energy Balance During the Warm-Up of a Diesel Engine SAE Technical Paper 2014-01-0676 2014 10.4271/2014-01-0676
  6. Rabeau , F. and Magand , S. Modeling of a Thermal Management Platform of an Automotive D.I Diesel Engine to Predict the Impact of Downsizing and Hybridization during a Cold Start SAE Technical Paper 2014-01-0657 2014 10.4271/2014-01-0657
  7. Cicalese , G. , Berni , F. , and Fontanesi , S. Integrated In-Cylinder/CHT Methodology for the Simulation of the Engine Thermal Field: An Application to High Performance Turbocharged DISI Engines SAE Int. J. Engines 9 1 601 617 2016 10.4271/2016-01-0578
  8. Nagar , P. and Miers , S. Friction between Piston and Cylinder of an IC Engine: A Review SAE Technical Paper 2011-01-1405 2011 10.4271/2011-01-1405
  9. CD-Adapco 2015
  10. Gamma Technologies, LLC GT-SUITE: User Manual Version Westmont, IL 2016
  11. Bovo , M. and Davidson , L. Direct Comparison of Les and Experiment of a Single-Pulse Impinging Jet International Journal of Heat and Mass Transfer 88 102 2015 10.1016/j.ijheatmasstransfer.2015.04.025
  12. Sandoval , D. and Heywood , J. An Improved Friction Model for Spark-Ignition Engines SAE Technical Paper 2003-01-0725 2003 10.4271/2003-01-0725
  13. Bovo , M. and Davidson , L. On the Numerical Modeling of Impinging Jets Heat-Transfer - A Practical Approach Numerical Heat Transfer, Part A: Applications 64 4 290 316 2013 10.1080/10407782.2013.784113
  14. Bo , T. CFD Homogeneous Mixing Flow Modelling to Simulate Subcooled Nucleate Boiling Flow SAE Technical Paper 2004-01-1512 2004 10.4271/2004-01-1512
  15. Hartland , J. , Robertson , A. , and Clarke , T. The Control of Boiling in Automotive Cooling Applications SAE Technical Paper 2004-08-0175 2004
  16. Punekar , H. and Das , S. Numerical Simulation of Subcooled Nucleate Boiling in Cooling Jacket of IC Engine SAE Technical Paper 2013-01-1651 2013 10.4271/2013-01-1651
  17. Yi , Y. , Reddy , M. , Jarrett , M. , Shyu , P. et al. CFD Modeling of the Multiphase Flow and Heat Transfer for Piston Gallery Cooling System SAE Technical Paper 2007-01-4128 2007 10.4271/2007-01-4128
  18. Noda , Y. , Mamiya , N. , Sometani , S. , Hosoya , M. et al. Development of an Engine Oil Temperature Prediction Method Using 3D Model Simulation SAE Technical Paper 2005-01-1881 2005 10.4271/2005-01-1881
  19. Xiaoming , Y. , Guohua , C. , Yankun , J. , and Yunchuan , Z. Numerical Investigation of the EHL Performance and Friction Heat Transfer in Piston and Cylinder Liner System SAE Technical Paper 2004-01-0778 2004 10.4271/2004-01-0778
  20. Eldin , H.S.

Cited By