AS3089 STUD - STRAIGHT, KEY LOCKED, STEEL .375-24 UNJF X .375-24 UNJF
Reaffirmed
07/27/2006
- Features
- Issuing Committee
- Content
- No Scope available
- Content
- THIS DOCUMENT HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE 5-YEAR REVIEW POLICY.
-
1
MATERIAL: STUD - STEEL, AMS 6322 KEY - CRES, AMS 5688 -
2
HARDNESS: STUD - ROCKWELL C26-32 KEY - AS RECEIVED -
3
FINISH: STUD - CADMIUM PLATE AMS 2400. DIMENSIONS ARE AFTER PLATING. KEY - NONE. -
4
MANUFACTURING SPECIFICATION: AMS 7452. REQUIREMENTS RELATED TO BOLT HEADS NOT APPLICABLE.
-
5
MAGNETIC PARTICLE INSPECTION PER AMS 2640 AFTER PLATING.
-
6
SURFACE TEXTURE: ANSI B46.1-1962. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES (3.2 MICROMETRES).
-
7
DIMENSIONING AND TOLERANCING: ANSI Y14.5-1973. Ø = DIAMETER. FORM TOLERANCES AND RELATED DATUMS ARE RFS.
-
8
BREAK SHARP EDGES .003-.015 (0.08-0.38) UNLESS OTHERWISE SPECIFIED.
-
9
DIMENSIONS IN INCHES, (MILLIMETRES), METRIC CONVERSIONS IN PARENTHESIS ARE IN INTERNATIONAL SYSTEMS UNITS (SI).
-
10
MARK AEROSPACE STANDARD IDENTIFICATION NUMBER AND MANUFACTURERS IDENTIFICATION ON CONTAINER.
-
11
DO NOT USE UNASSIGNED AEROSPACE STANDARD IDENTIFICATION NUMBERS.
-
12
THE INSTALLED STUD SHALL HAVE A MINIMUM RESISTANCE TO TORQUE OUT OF 240 LBF-IN (27.12 N.m).
-
SOURCE OF SUPPLY
-
TRIDAIR INDUSTRIES
-
FASTENER DIVISION
-
TORRANCE, CALIFORNIA 90505
-
MANUFACTURER'S CODE IDENT NO. 29372
-
DRAWING NO. TR15106
-
-
ONLY THE ITEM DESCRIBED ON THIS DRAWING WHEN PROCURED FROM THE VENDOR LISTED HEREON IS APPROVED FOR USE IN THE APPLICATIONS SPECIFYING THIS AEROSPACE STANDARD IDENTIFICATION NUMBER. A SUBSTITUTE ITEM SHALL NOT BE USED WITHOUT PRIOR TESTING AND APPROVAL BY THE DESIGN ACTIVITY RESPONSIBLE FOR THE APPLICATION.
-
1
- Pages
- 2
- Citation
- SAE International Technical Standard, STUD - STRAIGHT, KEY LOCKED, STEEL .375-24 UNJF X .375-24 UNJF, SAE Standard AS3089, Reaffirmed July 2006, Issued May 1975, https://doi.org/10.4271/AS3089.