This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
SAE Instrumented Arm User’s Manual
- Ground Vehicle Standard
- J2855_201710
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This user’s manual covers the instrumented arm for the Hybrid III 5th Percentile Small Female dummy as well as the SID –IIs dummy. It is intended for technicians and engineers who have an interest in assessing arm injury from the use of frontal and side impact airbags. It covers the construction, disassembly and reassembly, available instrumentation, and segment masses.
Rationale
Document is being updated from Engineering Aid 36 to a “J” document.
Added Scope – “This user’s manual covers the instrumented arm for the Hybrid III 5th Percentile Small Female dummy as well as the SID –IIs dummy. It is intended for technicians and engineers who have an interest in assessing arm injury from the use of frontal and side impact airbags. It covers the construction, disassembly and reassembly, available instrumentation, and segment masses.”
In introduction – “According to S.M. Kuppa, et al, in his 1997 research paper” was changed to “According to S.M. Kuppa, et al, in their 1997 research paper”.
Section 2 REFERENCES - added “SAE J211-1 – Instrumentation for Impact Test – Part 1 – Electronic Instrumentation”.
Section 2 REFERENCES – added “SAE J2878 – Low Speed Thorax Impact Test Procedure for the HIII 5th Dummy”.
Section 2 REFERENCES – added Kuppa, S., Olson, M., Yeiser, C., Taylor, L. et al., "RAID - An Investigative Tool to Study Air Bag/Upper Extremity Interactions," SAE Technical Paper 970399, 1997, https://doi.org/10.4271/970399.
Section 2 REFERENCES – added “Section 2.1.2 ISO Publications”.
Section 2.1.2 – added “ISO Technical Report (TR) number 15827, Road vehicles — Test procedures — Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags”.
Table 1 Title – added “ARM MASSES”.
Table 2 Title – added “RANGE OF MOTION LIMITS”.
Table A1 Title – added “FASTENERS”.
Updated “Prepared By” to include “OF THE SAE HUMAN BIOMECHANICS AND SIMULATIONS STANDARDS STEERING COMMITTEE”.
APPENDIX E Title – Added “DRAWINGS”.
APPENDIX F – Deleted.
Recommended Content
Technical Paper | Front Impact Pulse Severity Assessment Methodology |
Technical Paper | Digital and Analog Filters for Processing Impact Test Data |
Ground Vehicle Standard | Low Speed Thorax Impact Test Procedure for the HIII 50th Male Dummy |
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Table 1 | Arm masses | |
Table 2 | Range of motion limits | |
Table A1 | Fasteners | |
Table B1 | Arm load cell (Model 3780) | |
Table B2 | Elbow load cell (Model 3781) | |
Table B3 | Potentiometer (Midori America Corp.) |
Issuing Committee
Dummy Testing and Equipment Committee
The Dummy Testing Equipment Committee (DTEC) is a group of experts with experience in the area of certification and handling of Anthropomorphic Test Devices (ATD), more commonly known as crash test dummies, and equipment related to ATD. The DTEC seeks to standardize the use and certification of ATD so that test data are both repeatable and reproducible.
Reference
Number | Title |
---|
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.