This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN
- Aerospace Standard
- AS3611B
- Revised
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
DELETE RADIUS AT TRANSITION FROM WRENCH PADS TO BASE FLANGE, REVISE DEPICTION OF BOTTOM OF LIGHTENING HOLE, UPDATE REFERENCES, CORRECT TYPO IN APPROX MASS FOR AS3611-6-60. CORRECT ERRORS IN APPROXIMATE MASS FOR AS3611-12-20 THROUGH AS3611-12-96, ADD NEW NOTE FOR EXISTING INVENTORY DISPOSITION, UPDATE FPI REFERENCE, FIGURE 1 RE-DRAWN, GENERAL EDITORIAL UPDATE.
Recommended Content
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1A | DASH NUMBERS, THREAD D, AS870 DASH NO., AND DIMENSIONS B, ∅C, ∅E, ∅F, ∅G, AND H | |
TABLE 1B | DASH NUMBERS AND DIMENSIONS K, R, T, U, ∅V, ∅AB, AC, AND AD | |
TABLE 2 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .1900 NOMINAL DIAMETER BOLTS | |
TABLE 3 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .2500 NOMINAL DIAMETER BOLTS | |
TABLE 4 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .3125 NOMINAL DIAMETER BOLTS | |
TABLE 5 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .3750 NOMINAL DIAMETER BOLTS | |
TABLE 6 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .4375 NOMINAL DIAMETER BOLTS | |
TABLE 7 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .5000 NOMINAL DIAMETER BOLTS | |
TABLE 8 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .5625 NOMINAL DIAMETER BOLTS | |
TABLE 9 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .6250 NOMINAL DIAMETER BOLTS | |
TABLE 10 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .7500 NOMINAL DIAMETER BOLTS | |
TABLE 11 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR .8750 NOMINAL DIAMETER BOLTS | |
TABLE 12 | PART NUMBERS AND DIMENSIONS L, M, N, AND APPROXIMATE MASS FOR 1.0000 NOMINAL DIAMETER BOLTS |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.