This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Comparison of V10 and V12 F1 Engines
Annotation ability available
Sector:
Language:
English
Abstract
The paper compares 3.0 liter F1 engines having different architectures and developed in compliance with the 1998 FIA Technical Regulations. Similarity rules and non dimensional parameters from previous projects define key geometric and operating parameters for V10 and V12 engines having equal degree of sophistication. The paper presents computed classical engine outputs versus engine speed, including brake, indicated and friction values. The V12 solution shows clear advantages in terms of pure engine performances.
Recommended Content
Technical Paper | Parametric Design of FIA F1 Engines |
Technical Paper | Piston and Piston Ring Design and Development for the Formula 1 Engine |
Technical Paper | Similarity Rules and Parametric Design of Race Engines |
Authors
Topic
Citation
Boretti, A. and Cantore, G., "Comparison of V10 and V12 F1 Engines," SAE Technical Paper 983035, 1998, https://doi.org/10.4271/983035.Also In
References
- Federation Internationale de L'Automobile “Technical Regulations for Formula One Cars.” January 1 1997 December 31 1997 www.fia.com
- Boretti, A.A. et al. “Advanced Tools for Intake and Exhaust Port Design in Four Valve Spark Ignition Engines” “ATA Seminar High Performances Spark Ignition Engines for Passenger Cars” Milan, Italy November 1992
- Boretti, A.A. Cantore, G. Mattarelli, E. “Numerical Correlation of Combustion Evolution and Port and Combustion Chamber Shape in a High Speed, Four Valve Spark Ignition Engine,” “SAE Motor Sport Engineering Conference and Exposition” Dearborne, Michigan December 1994 SAE P. 942534
- Boretti, A.A. Borghi, M. Cantore, G. “Numerical Study of Volumetric Efficiencies in a High Speed, Four Valve, Four Cylinder Spark Ignition Engine,” “SAE Motor Sport Engineering Conference and Exposition” Dearborne, Michigan December 1994 SAE P. 942533
- Boretti, A.A. Borghi, M. Marmorini, L. Mattarelli, E. “Experimental and Computational Methods for Port Design in High Performance Four Valve Spark Ignition Engines,” “Convegno Modena Motori - Automobili e motori high-tech” Modena, Italy May 1995
- Boretti, A.A. Borghi, M. Dominici, A. Guerrini, G. Mattarelli, E. “Influence of Intake Port Design on Permeability and Rate of Combustion in a Four Valve High Performance Engine” “ATA 2 nd International Seminar High Performances Spark Ignition Engines for Passenger Cars” Milan, Italy November 1995
- Boretti, A.A. Borghi, M. Cantore, G. Mattarelli, E. “Computational methods for the Fluid Dynamic Optimization of High Performance Engines” “2° Convegno Automobili e motori high-tech” Modena, Italy May 1996
- Boretti, A.A. Borghi, M. Cantore, G. Mattarelli, E. “Numerical Optimization of a F1 Engine with variable Intake and Exhaust Geometry and Valve Events” “2 nd SAE Motor Sport Engineering Conference and Exposition” Dearborne, Michigan December 1996
- Boretti, A.A. Cantore, G. Mattarelli, E. Preziosi, M. “Experimental and Computational Analysis of a High Performance Motorcycle Engine” “2 nd SAE Motor Sport Engineering Conference and Exposition” Dearborne, Michigan December 1996
- Boretti, A.A. Villa, F. “Design of the Fiat Auto Corse ITC 96 racing engine. Part I: valve lift profiles and timings” 1997 SAE International Congress and Exposition Detroit, Michigan February 1997
- Boretti, A.A. Secchi, D. “Design of the Fiat Auto Corse ITC 96 racing engine. Part II: pipe lengths and diameters” 1997 SAE International Congress and Exposition Detroit, Michigan February 1997
- Pignone, G.A. Vercelli, U.R. Motori ad alta potenza specifica Nada Giorgio Milan, Italy 1995
- Rothbart, H.A. Cams, Design, Dynamic and Accuracy John Wiley & Sons, Inc. New York 1956
- Bocchi, G. Motori a quattro tempi Milan, Italy 1987
- Stone, R. Introduction to Internal Combustion Engines SAE Warrendale, PA 1995
- Heywood, J.B. Nitschke, R.G. Patton, K.J. “Development and Evaluation of a Friction Model for Spark-Ignition Engines” SAE P. 890836
- Yagi, S. et al. “Total Engine Friction in Four Stroke S.I. Motorcycle Engine” SAE P. 880268
- Yagi, S. et al. “Estimate of Total Engine Loss and Engine Output in Four Stroke S.I. Engines” SAE P. 910347
- “Engine Tech” Race Tech, Racing Technique & Race Car Technology 3 1 1997
- Henein, N.A. et al. “A New Approach to Determine Lubrication Regimes of Piston-Ring Assembles” Journal of Tribology 119 October 1997 808 3 816
- Ricardo North America Inc. “WAVE User's Manual” Burr Ridge IL, USA 1997
- Morel, T. La Pointe, L.A. “Concurrent Simulation and Testing Concept in Engine Development” SAE P. 940207
- Morel, T. Silvestri, J.J. Costello, M. “Study of Intake System Wave Dynamics and Acoustics by Simulation and Experiments” SAE P. 940206
- Morel, T. Keribar, R. Blumberg, P.N. A New Approach to Integrating Engine Performance and Component Design Analysis Through Simulation” SAE P. 880131
- Morel, T. Lowe, A.S.H. “A New Generation of Tools for Accurate Thermo-Mechanical Finite Element Analyses of Engine Components” SAE P. 920681
- Jackson, N.S. Pilley, A.D. Owen, N.J. “Instantaneous Heat Transfer in a Highly Rated DI Truck Engine,” SAE P. 900692