This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Load Leveling Device Selection for Hybrid Electric Vehicles
Annotation ability available
Sector:
Language:
English
Abstract
An important component in many hybrid electric vehicle (HEV) concepts is the load leveling device (LLD). The best type of LLD for HEVs is under debate. This paper identifies the important concept selection criteria for the three leading types of LLDs being considered for use in HEVs. The performance of electrochemical batteries, ultracapacitors, and flywheels is compared using these criteria. The concept selection methodology indicates that at the present time flywheels show the most promise for development for use in a hybrid electric vehicle. The use of this type of selection methodology is a powerful tool in identifying concepts worthy of development as well as determining performance criteria in need of improvement within each concept.
Recommended Content
Technical Paper | Design of The Ohio State University Electric Race Car |
Journal Article | Energy, Economical and Environmental Analysis of Plug-In Hybrids Electric Vehicles Based on Common Driving Cycles |
Authors
Citation
Koeneman, P. and McAdams, D., "Load Leveling Device Selection for Hybrid Electric Vehicles," SAE Technical Paper 981130, 1998, https://doi.org/10.4271/981130.Also In
References
- Ashley, Steven “Flywheels Put a New Spin on Electric Vehicles,” Mechanical Engineering October 1993
- Ashley, Steven “Surging Ahead with Ultracapacitors,” Mechanical Engineering 117 2 76 79 1995
- Bates, Bradford “Getting a Ford HEV on the Road,” IEEE Spectrum 32 7 22 25 1995
- Braess, Hans-Hermann Regar, Karl-Nikolaus “Electrically Propelled Vehicles at BMW -- Experience to Date and Development Trends,” Electric Vehicle Design and Development SAE Special Publication SP-862 53 62 1991
- Burke, A.F. “Hybrid/Electric Vehicle Design Options and Evaluations,” Electric and Hybrid Vehicle Technology SAE Special Publication SP-915 53 77 1992
- Burke, A.F. “Cycle Life Considerations for Batteries in Electric and Hybrid Vehicles,” Electric and Hybrid Vehicles -- Implementation of Technology SAE Special Publication SP-1105 163 173 1995
- Burke, Andrew F. “Electric/Hybrid Super Car Designs using Ultracapacitors,” Proceedings of the Intersociety Energy Conversion Engineering Conference 2 89 95 1995
- Davis, Gregory W. “The Effect of a Regenerative Braking System in the Amphibian Hybrid Electric Vehicle,” Proceedings of the Intersociety Energy Conversion Engineering Conference 3 1430 1435 1994
- Dickinson, Blake E. Swan, David H. EV Battery Pack Life: Pack Degradation and Solutions,” Electric and Hybrid Vehicles -- Implementation of Technology SAE Special Publication SP-1105 145 154 1995
- Dowgiallo, Edward J. Hardin, Jasper E. “Perspective on Ultracapacitors for Electric Vehicles,” IEEE Aerospace and Electronic Systems Magazine 10 8 26 31 1995
- Heitner, Kenneth L. “Energy Storage Requirements and Optimization of Sustaining Power Source for Hybrid Vehicles,” Proceedings of the Intersociety Energy Conversion Engineering Conference 3 1387 1392 1994
- Hively, Will “Reinventing the Wheel,” Discover 17 8 58 68 1996
- Hoolboom, Gerard J. Szabados, Barna “Nonpolluting Automobiles Ó IEEE Transactions on Vehicular Technology 43 4 1136 1144 1994
- Hunt, Gary L. Sutula, Raymond A. Heitner, Kenneth L. “Energy Storage Requirements and Testing for Hybrid Electric Vehicles,” Proceedings of the Intersociety Energy Conversion Engineering Conference 2 97 102 1995
- Kalberlah, A. “Electric Hybrid Drive Systems for Passenger Cars and Taxis,” Electric Vehicle Design and Development SAE Special Publication SP-862 69 78 1991
- Merry, Glen W. “Zinc-air Batteries for Electric Vehicles,” Electric Vehicle R&D SAE Special Publications SP-880 11 16 1991
- Moore, Timothy C. Lovins, Amory B. “Vehicle Design Strategies to Meet and Exceed PNGV Goals,” Electric and Hybrid Vehicles -- Implementation of Technology SAE Special Publication SP-1105 79 121 1995
- Otto, K.N. Wood, K.L. “Estimating Errors in Concept Selection,” 1995 Design Engineering Technical Conferences 2 397 411 1995
- Pahl, G. Beitz, W. Engineering Design: A Systematic Approach Springer Verlag London 1984
- Post, Richard F. Bender, Donald A. Merritt, Bernard T. “Electromechanical Battery Program at the Lawerence Livermore National Laboratory,” Proceedings of the Inter-society Energy Conversion Engineering Conference 3 1367 1373 1994
- Schaible, Uwe Szabados, Barna “A Torque Controlled High Speed Flywheel Energy Storage System for Peak Power Transfer in Electric Vehicles,” Conference Record -- IAS Annual Meeting 1 435 442 1994
- Steeg, Helga Electric Vehicles: Technology, Performance, and Potential OECD/IEA 1993
- Trippe, Anthony P. Burke, Andrew F. Blank, Edward “Improved Electric Vehicle Performance with Pulsed Power Capacitors,” Electric and Hybrid Vehicle Advancements SAE Special Publications SP-969 89 94 1993
- Ulrich, Karl T. Eppinger, Steven D. Product Design and Development McGraw-Hill 1995
- Wells, Stephen P. Pang, Da-Chen Kirk, James A. “The Design, Manufacture, and Testing of a Composite Flywheel for Energy Storage,” Mechanics in Materials Processing and Manufacturing 194 397 404 1994