This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Advanced Technology of Sheet Metal Forming in Japan
Annotation ability available
Sector:
Language:
English
Abstract
In automobile companies new techniques of sheet metal forming have been developed and some of them are applied practically in order to solve the social demands to automobile. Sheet materials makers have also developed new materials with good formability in response to the requests of automobile companies. Current topics of sheet metal forming techniques in Japan are; (1) Stamping of high strength steel and aluminum alloy sheets for weight reduction of autobody, (2) Stamping of tailored blanks, (3) Application of new forming techniques such as hydro-mechanical forming and blank holding force control, and (4) Practical application of FEM simulation to die making and stamping processes for the reduction of preparation time and the optimization of forming processes.
Authors
Citation
Hayashi, H., "Advanced Technology of Sheet Metal Forming in Japan," SAE Technical Paper 970980, 1997, https://doi.org/10.4271/970980.Also In
References
- Hayashi, H. “Weight reduction of automobile and sheet metal forming” Press Working 32-9 1994 10 18
- Okubo N. Sugisawa M. “Vehicle weight reduction and automotive materials” J. Japan Society for Technology of Plasticity 21-229 1980 92 98
- Hayashi, H. “Sheet metal forming in automobile industry” Text of 61st JSTP lecture on sheet metal forming Tokyo 1995 84 98
- Hayashi, H. “Recent trends in sheet metals and their formability in manufacturing automotive panels” J. Materials Processing Technology 46-3-4 1994 455 487
- Hayashi, H. “Development of new types of high strength steel sheets and their application trials to autobodies in Japan” IDDRG WG93 Paper Linz, Austria 1993
- Ujihara, S. “The state of art on the application of high strength steel sheets for autobody” IDDRG WG94 Paper Lisbon, Portugal 1994
- JSFRG(JDDRG) Hayashi, Y. Hayashi, H. “Cooperative research on evaluation of flaking and powdering of coated steel sheets” IDDRG WG85 Paper Amsterdam, The Netherlands 1985
- JDDRG Ike. H. et al. “Simulation tests of the sliding characteristics of coated steel sheets in autobody-panel forming” IDDRG WG91 Paper Pisa, Italy 1991
- JDDRG Shimada, Y. et al. “Formability of coated steel sheets evaluated by actual stamping test and laboratory simulation tests” Proc. 17th IDDRG Congress Shenyang, China 1992 16 23
- Hayashi, H. “The control of shape fixation and springback of aluminum alloy sheet in model forming” SAE Paper , No. 960819 1996
- “Hot rolled steel sheets and strip for automobile use” 1996
- “Cold rolled steel sheets and strip for automobile use” 1996
- “Hot-dip galvannealed steel sheets and strip for automobile use” 1996
- “Electrolytic zinc coated steel sheets and strip for automobile use” 1996
- “Electrolytic zinc-iron alloy coated steel sheets and strip for automobile use” 1996
- “Electrolytic zinc-nickel alloy coated steel sheets and strip for automobile use” 1996
- “Electrolytic zinc-nickel alloy and organic composite coated steel sheets and strip for automobile use” 1996
- “Method of hole expanding test” 1996
- “Method of determining the plastic strain ratio for steel sheets and strip” 1996
- Azuma, K. Ikemoto, K. Sugiura, H. Arima, K. Takasago, T. “Press formability of laser welded blanks” Proc. 16th IDDRG Congress Borlänge, Sweden 1990 305 311
- Sudo, C. Hirose, Y. Hayashi, Y. “Super formative steel sheet with excellent stretchability and low effective yield strength” Proc. 16th IDDRG Congress Borlänge, Sweden 1990 397 403
- Ikemoto, K. “Hydraulic counter pressure forming for automobile panel” J. Japan Society for Technology of Plasticity 33-375 1992 379 384
- Wang, Y.-W. Majlessi, A. “The design of an optimum binder force system for improving sheet metal formability” Proc. 18th IDDRG Congress Lisbon, Portugal 1994 491 502
- Kirii, K. Shinabe, M. Hirabayashi, Y. Akiyama, M. “Binding force control of uni-pressure cushion in automobile panel stamping” SAE Paper , No. 950916 1995
- Watanabe, Y. “Warm forming of stainless steel” J. Japan Soc. Technology of Plasticity 33-375 1992 396 403
- Kawka, M. Makinouchi, A. Wang, S.-P. Nakamachi, E. “Advances and trends in sheet metal forming simulation in Japanese automotive industry” SAE Paper 1997