This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
HVOF Cermet Coatings for High Horse Power Diesel Engines
Annotation ability available
Sector:
Language:
English
Abstract
High Velocity Oxygen Fuel sprayed face coatings have shown great promise for piston rings used for High Power Density Diesel Engines. Various coatings have been tested on both wear test rigs and in engines. A highly dense HVOF cermet coating was developed with reasonable crack resistance during service. The HVOF coated piston rings wore three to six times lower than chrome plating. Cylinder liner (counter face) wear was found to be one to three times higher than chrome. However, engine oil consumption and blow by were within normal values.
The HVOF coating is considered to be an excellent replacement for chrome plating. The coating process is more environmentally friendly than the chrome plating process. Also, the coating has potentially lower or equivalent production cost when compared to chrome.
Recommended Content
Authors
Topic
Citation
Rastegar, F., "HVOF Cermet Coatings for High Horse Power Diesel Engines," SAE Technical Paper 970817, 1997, https://doi.org/10.4271/970817.Also In
References
- Rastegar F. Graham M.E. Legg K.O. Rudnik P.J. Chang T.P. Schell J.T. Gonzales A. Sartwell B. Clean Alternatives to Electrolytic Chrome (Invited paper) Srivatsa A.R. Clayton C.R. Hiroven J.K TMS 1995
- Rastegar F. Craft A.E. “Piston Rings for High Horse Power Diesel Engines” McGuire G.E. Matthews A. Jehn H.A. Metallurgical Coatings and Thin Films 1 Elsevier New York 1993 36 42
- Young W.B. McComb J.A. “New Piston Ring Face Coatings Using Design of Experiments” SOCIETY OF AUTOMOTIVE ENGINEERS Warrendale, PA Paper No. 900588 March 1990
- Beyer H. Buran U. “New Plasma Coatings for Long Life Piston Rings” Goetze AG Publications Goetze Symposium 1991
- Rastegar F. “Piston Ring Development for Low Heat Rejection Diesel Engine” Proceedings of the Advance Heat Engines Work Shop Dept. of Energy Washington D.C. 8 1992 III-93 III-104
- Yoshida H. Kusama K. Sagawa J. “Effects of Surface Treatments on Piston Ring Friction Force and Wear” SOCIETY OF AUTOMOTIVE ENGINEERS Warrendale, PA Paper No. 900589 February 1990
- Fukutome H Shimizu H. Yamashita N. Shimizu Y. “The Application of Cermet Coating on Piston Ring by HVOF” 14th Int. Thermal Spray Conf. Kobe, Japan 1995 21 26
- Rastegar F. “Ring Coatings for a Low Heat Rejection Engine” Berndt C.C. Proceedings of International Thermal Spray Conference American Society of Metals Materials Park, Ohio 1992 743 748
- Naylor M.G. “Development of Wear -Resistance Ceramic Coatings for Diesel Engine Components’ Final Report to Martin Marietta 1992
- Lee D. “Development of a Thick Wear - Resistant Jet Kote Coating Produced at High Deposition Rate: A Technical Note” Journal of Thermal spray Technology 4 3 1995 229 234