This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Simulation Analysis of the Effect of Governor Technical Characteristics and Type on the Transient Performance of a Naturally Aspirated IDI Diesel Engine
Annotation ability available
Sector:
Language:
English
Abstract
A transient analysis simulation program is developed for studying the response of an indirect injection, naturally aspirated, diesel engine after a rapid increase in load when this is equipped with various types of indirect acting governors. Analytical expressions are presented for the better simulation of engine mechanical friction, inertia moments and heat loss to the walls under transient conditions, governor dynamics for both the sensing element and the servopiston, soot emissions and the fuel pump operation. Various types of governor sensing elements (i.e. mechanical, electrical, two-pulse) and feedbacks (i.e. unity and vanishing) for the servomechanism are studied. Explicit diagrams are given to show how each combination of governor type and technical parameters (i.e. mass and number of flyweights, geometrical dimensions, amplification factors) affects the speed response as well as the speed droop and the recovery period of the particular engine.
Recommended Content
Technical Paper | On Combustion Noise and Working Stability of 6130Q Diesel Engine |
Technical Paper | Diesel Engine Cold Starting: White Smoke |
Technical Paper | Contribution of Fuel Flow Improvement in Nozzle to Spray Formation |
Authors
Topic
Citation
Rakopoulos, C., Giakoumis, E., and Hountalas, D., "A Simulation Analysis of the Effect of Governor Technical Characteristics and Type on the Transient Performance of a Naturally Aspirated IDI Diesel Engine," SAE Technical Paper 970633, 1997, https://doi.org/10.4271/970633.Also In
References
- Blair, J.R ‘Governing: An Examination of a Torque Feedforward Loop’ Proc. Inst. Meck. Engrs 186 603 611 1972
- Krutov, V.I. Automatic Control of Internal Combustion Engines MIR Publishers Moscow 1987
- Oldenburger, R. ‘Hydraulic Speed Governor with Major Governor Problems Solved’ Trans ASME, J. of Basic Engg 1 16 1965
- Webb, C.R. Janota, M.S. ‘Governors with Load Sensing’ Proc. Inst. Mech. Engrs 184 161 179 1969
- Welbourne. D.B. Roberts, D.K. Fuller, R.A. ‘Governing of Compression Ignition Oil Engines’ Proc. Inst. Meck. Engrs 173 575 591 1959
- Ledger, J.D. Walmsley, S. ‘Computer Simulation of a Turbocharged Diesel Engine Operating under Transient Load Conditions’ SAE paper No 710177 1971
- Watson, N. Marzouk, M. ‘A Non-Linear Digital Simulation of Turbocharged Diesel Engines under Transient Conditions’ SAE paper No 770123 1977
- Marzouk, M. Watson, N. ‘Load Acceptance of Turbocharged Diesel Engines’ Proc. Inst. Mech. Engrs Conference on Turbocharging and Turbochargers 45 57 1978
- Watson, N. ‘Transient Performance Simulation and Analysis of Turbocharged Diesel Engines’ SAE paper No 810338 1981
- Watson, N. Janota, M.S. Turbocharging the Internal Combustion Engine Macmillan, London 1982
- Winterbone, D. E. Benson, R. S. Mortimer, A.G. Kenyon, P. Stotter, A. ‘Transient Response of Turbocharged Diesel Engines: Pt. 1 - A Comparison of Two methods of Improving Response, Pt. 2 - Application to a Heavy Duty Truck: A Study of the Dynamic Performance of the Engine’ SAE paper No 770122 1977
- Winterbone, D.E. Loo, W.Y. ‘A Dynamic Simulation of a Two-Stroke Turbocharged Diesel Engine’ SAE paper No 810337 1981
- Winterbone, D. E. Tennant D. W. H. ‘The Variation of Friction and Combustion Rates during Diesel Engine Transients’ SAE paper No 810339 1981
- Horlock, J. H. Winterbone, D. E. Thermodynamics and Gas Dynamics of Internal Combustion Engines Vol. II Clarendon Press Oxford 1986
- Rakopoulos, C.D. Giakoumis, E.G. ‘Simulation and Analysis of a Naturally Aspirated, Indirect Injection Diesel Engine under Transient Conditions Comprising the Effect of Various Dynamic and Thermodynamic Parameters’ Energy Convers. Mgmt
- Baruah, P.C. ‘A Simulation Model for Transient Operation of Spark Ignition Engines’ SAE paper No 900682 1990
- Gardner, T.P. Henein, N.A. ‘Diesel starting: A Mathematical Model’ SAE paper No 880426 1988
- Keribar, R. Morel, T. ‘Thermal Shock Calculations in I.C. Engines’ SAE paper No 870162 1987
- Rakopoulos, C.D. Mavropoulos, G.C. ‘Study of the Steady and Transient Temperature Field and Heat Flow in the Combustion Chamber Components of a Medium Speed Diesel Engine Using Finite Element Analyses’ Energy Res . 20 437 464 1996
- Rakopoulos, C.D. Hountalas, D.T. Mavropoulos, G.C. Giakoumis, E.G. ‘An Integrated Transient Analysis Simulation Model Applied in Thermal Loading Calculations of an Air-Cooled Diesel Engine under Variable Speed and Load Conditions’ 1997 SAE International Congress and Exposition Detroit, MI Feb. 24-27 1997
- Bazari, Z. ‘Diesel Exhaust Emissions Prediction under Transient Operating Conditions’ SAE paper No 940666 1994
- McClure, B.T. ‘Characterization of the Transient Response of a Diesel Exhaust Gas Measurement System’ SAE paper No 881320 1988
- Jiang, Q. Van Gerpen, J.H. ‘Prediction of Diesel Engine Particulate Emission during Transient Cycles’ SAE paper No 920466 1992
- Murayama, T. Miyamoto, N. Tsuda, T. Suzuki, M. Hasegawa, S. ‘Combustion Behaviors under Accelerating Operation of an IDI Diesel Engine’ SAE paper No 800966 1980
- Krieger, R.B. Borman, G.L. ‘The Computation of Apparent Heat Release for Internal Combustion Engines’ ASME paper 66 WA/DGP-4 1966
- Ferguson, C.R. Internal Combustion Engines John Wiley and Sons New York 1986
- Heywood, J.B. Internal Combustion Engine Fundamentals McGraw-Hill New York 1988
- Benson, R.S. Whitehouse, N.D. Internal Combustion Engines Pergamon, Oxford 1979
- Kouremenos, D. A. Rakopoulos, C. D. Hountalas, D. T. ‘Thermodynamic Analysis of Indirect Injection Diesel Engines by Two-Zone Modelling of Combustion’ Trans. ASME, J Engng for Gas Turbines and Power 112 138 149 1990
- Rakopoulos, C. D. Giakoumis, E. G. Development of Cumulative and Availability Rate Balances in a Multi-Cylinder Turbocharged IDI Diesel Engine’ Energy Convers. Mgmt 1996
- Kouremenos, D.A Rakopoulos, C.D. Hountalas, D.T Kotsiopoulos, P.N. ‘A Simulation Technique for the Fuel Injection System of Diesel Engines’ ASME-WA meeting Atlanta GA Proc. AES 24 91 102 1991
- Whitehouse, N.D. Way, R.G.B. ‘Rate of Heat Release in Diesel Engines and its Correlation with Fuel Injection Data’ Proc. Inst. Mech. Engrs 184 17 27 1969-70
- Hiroyasu, H. Kadota, T. Arai, M. ‘Development and Use of a Spray Combustion Modelling to Predict Diesel Engine Efficiency and Pollutant Emissions’ Bulletin JSME 26 569 576 1983
- Shipinski, J Myers, P.S. Uyehara, O.A. ‘A Spray Droplet Model for Diesel Combustion’ Proc. Inst. Meck. Engrs 184 1969
- Annand, W.J.D. ‘Heat Transfer in the Cylinders of Reciprocating Internal Combustion Engines’ Proc. Inst. Mech Engrs 177 973 990 1963
- Rakopoulos, C.D. Hountalas, D.T. ‘Net and Gross Heat Release Rate Calculations in a DI Diesel Engine Using Various Heat Transfer Models’ ASME-WA meeting Chicago IL Proc. AES 33 251 262 1994
- Kouremenos, D.A Rakopoulos, C.D. Hountalas, D.T. Prechamber and Main Chamber Insulation Effects on the Performance of an IDI Diesel Engine Coupled to a Power Turbine’ Heat Recovery Systems and CHP 12 247 256 1992
- Millington, B.W Hartles, E.R. ‘Frictional Losses in Diesel Engines’ SAE paper No 680590 1968
- Taylor, C.F. The Internal Combustion Engine in Theory and Practice Vol. 2 MIT Press 1985
- Kouremenos, D. A. Rakopoulos, C.D. Kotsos, K.G. ‘Phasing Cylinder Pressure to Crank Angle in a Direct Injection Diesel Engine by Simulation of Compression Curve and Elaboration of Measured Pressure Data VDI Forschung Ing. - Wesens 57 87 95 1990
- Patterson, D. ‘Engine Torque and Balance Characteristics’ SAE paper No 821575 1982