This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Parameter Measurement and Development of a NADSdyna Validation Data Set for a 1994 Ford Taurus
Annotation ability available
Sector:
Language:
English
Abstract
This paper discusses the development of a 1994 Ford Taurus vehicle model for the National Advanced Driving Simulator's planned vehicle dynamics simulation, NADSdyna. The front and rear suspensions of the Taurus are modeled using recursive rigid body dynamics formulations. To complement vehicle dynamics, subsystems models that include steering, braking, and tire forces are included. These models provide state-of-the-art high fidelity vehicle handling dynamics for real-time simulation. The realism of a particular formulation depend heavily on how the parameters are obtained from the physical system. Therefore, the development of a data set for a particular model is as important as the model itself. The methodology for generating the Taurus data set is presented. The power train model is not yet included, so the simulation is run with the vehicle either at constant speed or decelerating.
Recommended Content
Topic
Citation
Salaani, M., Chrstos, J., and Guenther, D., "Parameter Measurement and Development of a NADSdyna Validation Data Set for a 1994 Ford Taurus," SAE Technical Paper 970564, 1997, https://doi.org/10.4271/970564.Also In
References
- Bae, D.S. Haug, E. J. “A Recursive Formulation for Constrained Mechanical Systems, Part I Open Loop,” Mechanics of Structures and Machines 15 3 359 382 1987
- Bae, D.S. Haug, E. J. “A Recursive Formulation for Constrained Mechanical Systems, Part II Closed Loop,” Mechanics of Structures and Machines 15 4 1987
- Tsai, F.F. Haug, E. J. “Automated Methods for High Speed Simulation for Multi-body Dynamic Systems,” Technical Report R047, Center for Computer Aided Design The University Of Iowa 1989
- Lee, S. W. “Development of New Dynamic Tire Model For Improved Vehicle Dynamics Simulation.” The Ohio State University Columbus, Ohio 1994
- Allen, R. W. Rosenthal, T.J. Szostak, H.T. “Analytical Modeling of Driver Response in Crash Avoidance Maneuvering,” DOT-HS-807-270 Systems Technology, Inc. April 1988
- Allen, R. W. “Vehicle Dynamic Stability and Rollover,” NHTSA DTNH 22-88-C-07384 Systems Technology, Inc. January 1991
- Haug, E. J. et al. “Feasibility Study and Conceptual Design of a National Advanced Driving Simulator,” Report No. DOT-HS-807-597 March 1990
- Pacejka, H. B. Bakker, E. Nyborg, L. “Tyre Modeling for Use In Vehicle Dynamics Studies,” SAE Paper 870421 February 1987
- Pacejka, H. B. Bakker, E. Lidner, L. “A New Tire Model with an Application in Vehicle Dynamics,” SAE Paper 890087 February 1989
- Jim Bernard Chris Clover “Tire Modeling for Low-Speed and High-Speed Calculations,” SAE Paper 950311 February 1995
- Bergman, W. “Effects of Compliances on Vehicle Handling Properties,” SAE paper 700369
- Cronin, D. L. “MacPherson Strut Kinematics,” Mechanism and Machine Theory 16 6 631 644 1981
- Kortum, W. Schiehlen, W. “General Purpose Vehicle System Dynamics Software Based on Multi-body Formalisms,” Vehicle System Dynamics 14 229 263 1985
- Ahmed, S. R. Gawthorpe, R. G. Mackrodt, P. A. “Aerodynamics of Road and Rail Vehicles,” Vehicle System Dynamics 14 319 392 1985
- Allen, R. W. Rosenthal, T. J. “Requirements for Vehicle dynamics Simulation Models,” SAE paper 940175 February 1994
- Freeman, J. S. et al. “The Iowa Driving Simulator: An Implementation and Application Overview,” SAE paper 950174 February 1995
- “Vehicle Aerodynamics Terminology,” SAE Recommended Practice, SAE J1594 JUN87, SAE Handbook 1991 4
- NADS Vehicle Dynamics Simulation. Release 4.0 Center for Computer-Aided Design, National Advanced Driving Simulator The University of Iowa Iowa City, IA. August 1995
- DADS Revision 7.5 Reference Manual 1 CADSI, Computer Aided Design Software, Inc.
- DADS Revision 7.5 Reference Manual 2 CADSI, Computer Aided Design Software, Inc.
- Polston, R. K. “The Influence of Vehicle Suspension Modeling on Virtual Prototyping,” The University Of Iowa Iowa City, IA 1994
- Chrstos, J. P. “Parameter Measurement and Computation for 1994 Ford Taurus GL,” DOT-NHTSA Report in Progress
- Chrstos, J. P. Grygier, P.A. “Instrumentation and Field Testing of 1994 Ford Taurus GL for NADSdyna Evaluation,” DOT-NHTSA Report in Progress
- Chrstos, J. P. “Simulation Evaluation of VDANL and VDM RoAD,” DOT-NHTSA Report in Progress
- Salaani, M. K. “Vehicle Dynamics Modeling for the National Advanced Driving Simulator of a 1994 Ford Taurus GL,” DOT-NHTSA Report in Progress
- Salaani, M. K Heydinger, G. J. “Vehicle Dynamics Evaluation for the National Advanced Driving Simulator of a 1994 Ford Taurus GL,” DOT-NHTSA Report in Progress
- Salaani, M. K “Development and Validation of a Vehicle Model for the National Advanced Driving Simulator,” The Ohio State University Columbus, Ohio 1996
- Salaani, M. K. Heydinger, G. J. Guenther, D. A. “Validation Results from Using NADSdyna Vehicle Dynamics Simulations,” SAE 970565 February 1997
- Chrstos, J. P. “A Simplified Method for the Measurement of Composite Suspension Parameters,” SAE 910232 February 1991
- Users Manual -Low Speed Wind Tunnel Lockheed Aeronautical Systems Company January 1989
- Pottinger, M. G. “Flat-Track II Machine helps in Tire Force Moment Measuring,” Rubber and Plastic News March 19 1990
- Garrott, W. R. Monk, M. W. Chrstos, J. P. “Vertical Inertial parameters- Measured Values and Approximations,” SAE 881767 February 1988
- Heitzman, E. “Topsy-A Modular Chassis Parameter Measurement System,” SAE Paper 971056