This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
State-of-the-Art of Mathematical Modeling of Sheet Metal Forming of Automotive Body Panels
Annotation ability available
Sector:
Language:
English
Abstract
The last few years have seen an enormous increase in the research, development and, especially, in the application of computer modeling of sheet metal forming operations. This increased industrial use is due to many factors, including: enhanced accuracy and robustness of forming codes, a growing sophistication in their use by engineers, common availability of CAD data for panels, and advances in hardware capability. This paper attempts to describe the current state-of-the art. We begin by offering a brief history of mathematical modeling of sheet forming, and then discuss some of the current formulations of finite element methods. We also speculate on some possible future accomplishments.
Recommended Content
Ground Vehicle Standard | VHDL-AMS Statistical Analysis Packages |
Technical Paper | Shortcuts in Cumulative Damage Analysis |
Authors
Topic
Citation
Wenner, M., "State-of-the-Art of Mathematical Modeling of Sheet Metal Forming of Automotive Body Panels," SAE Technical Paper 970431, 1997, https://doi.org/10.4271/970431.Also In
References
- Hecker S. S. Ghosh A. K. “The Forming of Sheet Metal,” Scientific American 235 100 108 1976
- Swift H. W. “Plastic Bending Under Tension,” Engineering 166 333 357 357 359 1948
- Hill R. “A Theory of the Plastic Bulging of a Metal Diaphragm by Lateral Pressure,” Philosophical Magazine 41 1133 1142 1950
- Wang N. M. Wenner M. L. “An Analytical and Experimental Study of Stretch Flanging,” Int. J. Mech. Sci. 16 135 143 1974
- Duncan J. L. Bird J. E. “Approximate Calculations for Draw Die Forming and Their Application to Aluminum Alloy Sheet,” Proc. 10th Biennial Congress of the IDDRG Warwick, England 45 52 1978
- Stoughton T. S. “Model of Drawbead Forces in Sheet Metal Forming,” Proc. 15th Biennial Congress of the IDDRG Dearborn, Michigan 205 215 1988
- Woo D. M. “Analysis of the Cup Drawing Process,” J. of Mech. Eng. Sci. 6 116 131 1964
- Yang D. Y. Lee H. S. “Analysis of Three-Dimensional Deep Drawing by the Energy Method,” Int. J. Mech. Sci. 35 491 516 1993
- Prasad C. A. V. Chaturvedi R. C. “Deep Drawing of Cylindrical Cups - An Improved Software for Industrial Use,” Proc. NUMISHEET '96 94 101 1996
- Kuwabara T. Takahashi S. Akiyama K. Miyashita Y. “2-D Springback Analysis for Stretch-Bending Processes Based on Total Strain Theory,” SAE Paper No. 950691 , SAE International Congress and Exposition Detroit, Michigan 1995
- Marciniak Z. Duncan J. L. The Mechanics of Sheet Metal Forming Edward Arnold London 1992
- Hibbitt H. D. Marcal P. V. Rice J. R. “A Finite Element Formulation for Problems of Large Strain and Large Displacement,” Int. J. Solids and Struc. 6 1069 1086 1970
- Wang N. M. Budiansky B. “Analysis of Sheet Metal Stamping by a Finite-Element Method,” J. Appl. Mech. 100 73 82 1978
- Kawka M. Makinouchi A. “Some Advances in FEM Simulation of Sheet Metal Forming Processes Using Shell Elements,” in NUMIFORM '95 A. A. Balkema Rotterdam 735 740 1995
- Tang S. C. Hu Y. “Quasi-static Analysis of Sheet Metal Forming Processes on a Parallel Computer,” in NUMIFORM '95 A. A. Balkema Rotterdam 495 500 1995
- Owen D. R. J. Feng Y. T. Peric̀ D. “Iterative Methods on Parallel Computers for FE Simulation of 3-D Forming Operations,” Proc. NUMISHEET '96 1 8 1996
- Chung K. Richmond O. “Ideal Forming -I. Homogeneous Deformation with Minimum Plastic Work,”and “Ideal Forming -II. Sheet Forming with Optimum Deformation,” Int. J. Mech. Sci. 34 575 591 617 633 1992
- Batoz J. L. Guo Y. Q. Mercier F. “The Inverse Approach Including Bending Effects for the Analysis and Design of Sheet Metal Forming Parts,” in NUMIFORM '95 A. A. Balkema Rotterdam 661 667 1995
- Honecker A. Mattiasson K. “Finite Element Procedures for 3D Sheet Forming Simulation,” in NUMIFORM '89 A. A. Balkema Rotterdam 457 463 1989
- Ni C. M. “Stamping and Hydroforming Process Simulations with a 3D Finite Element Code,” SAE Paper No. 940753 , SAE International Congress and Exposition Detroit, Michigan 1994
- Chung W. J. Cho J. W. Belytschko T. “A Study on Dynamic Effects of Dynamic Explicit FEM in Sheet Metal Forming Analysis,” in Proc. NUMISHEET '96 414 420 1996
- Lee J. K. Wagoner R. H. Nakamachi E. “A Benchmark Test for Sheet Forming Analysis,” Engineering Research Center, Ohio State University 1990
- FE-Simulation of 3-D Sheet Metal Forming Processes in Automotive Industry VDI Verlag Dusseldorf 1991
- NUMISHEET '93 Isehara, Japan 1993
- NUMISHEET '96 Dearborn, Michigan 1996
- Stevenson R. “Beyond Simulation,” in Proc. Automotive Body Design and Engineering IBEC '93 Detroit, Michigan 1993
- Bischof C. Carle A. Corliss G. Griewank A. Hovland P. “ADIFOR: Generating Derivative Codes from Fortran Programs,” Scientific Programming 34 1 29 1992
- Badrinarayanan S. Zabaras N. “A Sensitivity Analysis for the Optimal Design of Metal- Forming Processes,” Comp. Meth. App. Mech. Eng. 129 319 348 1996