This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Injector Targeting - Its Impact on Fuel Evaporation and Intake Valve Deposits
Annotation ability available
Sector:
Language:
English
Abstract
The life of liquid droplets on a hot surface is not a linear function of the surface temperature. Contrary to common belief, targeting the injectors at the intake valves does not always result in the best evaporation of liquid fuel. Timing and targeting of the injectors has to be a function of intake valve surface temperature and opening.
This paper will present some guidelines for design of cylinder heads, intake manifolds and injector targeting. Theoretical explanation of the fuel droplet life on the hot surface and its correlation to intake valve deposits and evaporation are discussed. The data presented will support the theoretical guidelines.
Recommended Content
Authors
Topic
Citation
Daneshgari, P., "Injector Targeting - Its Impact on Fuel Evaporation and Intake Valve Deposits," SAE Technical Paper 970041, 1997, https://doi.org/10.4271/970041.Also In
References
- Baumeister, K. J. Hamil, T. D. Schoessow, G. J. A general correlation of vaporization times of drops in film boiling on a flat plate Proceedings of the third international Heat Transfer Conference 4 66 73 Aug. 1966
- Mizomoto, M. Ikai, S. Evaporation and Ignition of a Fuel Droplet on a Hot Surface (part 1 and 2) Bulletin of the JSME 21 162 1765 1779 December 1978
- Nukiyama, S. The Maximum and Minimum Values of the Heat Q Transmitted From Metal to Boiling Water under Atmospheric Pressure Int. J. Heat and Mass Transfer 9 1419 1433 1966
- Hersstad, O. 1936 1937 1938 1939
- Daneshgari, P. et al The Influence of Temperature Upon Gasoline Deposit Build-up on the Intake Valves SAE 890215 International Congress and Exposition Detroit, Michigan Feb. 27 March 3 1989
- Daneshgari, P. Universitaet Karlsruhe 1988
- Mantey, C.A. Oldani, J.P. 1966 GM 7.4 Liter Engine Upgrade SAE 960012 , International Congress and Exposition Detroit, Michigan Feb. 27-29 1996
- Nogi, T. et al Mixture formation of Fuel Injection Systems in Gasoline Engines SAE 880558 , International Congress and Exposition Detroit, Michigan Feb. 29 March 4 1988
- Fox, J. W. et al Mixture Preparation in SI Engine with Port Fuel Injection During Starting and warm-up SAE 922170 , International Fuel and Lubricants Meeting and Exposition San Francisco, California October 1992