This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Gas Density and Temperature on Air Entrainment in a Transient Diesel Spray
Annotation ability available
Sector:
Language:
English
Abstract
The air entrainment in a transient diesel spray was studied using laser Doppler anemometry to provide information on the effect of gas density and temperature. The spray was injected vertically into a confined quiescent atmosphere and the entrained mass flow rate was evaluated by measuring the air velocity component normal to a cylindrical geometric surface surrounding the spray, and extending to about 200 nozzle diameters (50 mm). The experimental results, relative to a density range from 0.84 to 7.02 kg/m3 and a temperature range from 293 to 473 K, indicate that the non dimensional entrainment rate, averaged in time over the main injection period, depends on the distance from the nozzle and both gas density and temperature. A first analysis, based on the available data, allowed to quantify the dependence and provided a correlation with such variables.
Recommended Content
Citation
Cossali, G., Gerla, A., Coghe, A., and Brunello, G., "Effect of Gas Density and Temperature on Air Entrainment in a Transient Diesel Spray," SAE Technical Paper 960862, 1996, https://doi.org/10.4271/960862.Also In
References
- Ricou, F.P. Spalding, D.B. 1961 “Measurements of Entrainment by Axisymmetrical Turbulent jets” J. Fluid Mech. 11 21
- Hill, B.J. 1972 “Measurement of local entrainment rate in the initial region of axysimmetric turbulent air jets” J. Fluid Mech. 51 4 773 779
- Bogulawski, L. Popiel, 0. 1979 “Flow structure of the free round turbulent jet in the initial region” J. Fluid. Mech. 90 3 531 539
- Lightman, A.J. Andrews, R.J. Magill, P.D. Bradley, R.P. Reeves, C.M. Stutrud, J.S. Roquemore, W.M. 1984 “Entrainment characteristics of a jet issuing from the center of a Bluff body” Symposium on Turbulence
- Ruff, G.A. Sagar, A.D. Faeth, G.M. 1988 “Structure and Mixing Properties of Pressure-Atomized sprays” AIAA 26th Aerospace Sciences Meeting Nevada
- Cossali, G.E. Brunello, G. Coghe, A. 1991 “LDV Characterization of Air Entrainment in Transient Diesel Sprays” SAE paper 910178 Detroit
- Hosoya, H. Obokata, T. 1992 “LDA Measurements of Spray Flow from a single Hoie Diesel Type Nozzle under Steady Conditions” 6th Int. Symp. on Appl. of Laser Techn. to Fluid Mech. Lisbon
- Arcoumanis, C. Hadjiapostolou, A. Whitelaw, J.H. 1991 “Flow and Combustion in a Hydra Direct-Injection Diesel Engine” SAE paper 910177 Detroit
- Shundoh, S. Kakegawa, T. Tsujimura, K. Kobayashi, S. 1991 “The Effect of Injection Parameters and Swirl on Diesel Combustion with High Pressure Fuel Injection” SAE paper 910489 Detroit
- Cossali, G.E. Coghe, A. Brunello, G. 1993 “Effect of Spray-Wall Interaction on Air Entrainment in a Transient Diesel Spray” SAE paper n. 930920 Detroit, USA
- Coghe, A. Cossali, G.E. 1992 “Experimental Analysis of Wall-Spray Structure by Laser Doppler Techniques” 6th Int. Symp. on Appl. of Laser Techn, to Fluid Mech. Lisbon
- Obokata, T. Inaba, K. Takahashi, H. July 1988 “LDA Measurements of Diesel Spray and Entrainment Air Flow” Fourth Int. Symposium on Application of Laser Anemometry to Fluid Mechanics Lisbon
- Obokata, T. Hashimoto, T. Takahashi, H. 1990 “LDA Analysis of Diesel Spray and Entrainment Air Flow” International Symposium COMODIA 90 231 236
- Kamimoto, T. Won, Y. 1992 “Soot Formation and Related Techniques for its Reduction in Diesel Engines” 2nd Workshop on Fluidmechanics, Combustion, Emission and Reliability in Reciprocating Engines Capri, Italy
- Coghe, A. Cossali, G.E. Brunello, G. July 1994 “Phase Doppler Characterization of a Diesel Spray Injected into a high Density Gas under Vaporization” Seventh Int. Symposium on Application of Laser Anemometry to Fluid Mechanics Lisbon